21,150 research outputs found
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Sub-Nanosecond Time of Flight on Commercial Wi-Fi Cards
Time-of-flight, i.e., the time incurred by a signal to travel from
transmitter to receiver, is perhaps the most intuitive way to measure distances
using wireless signals. It is used in major positioning systems such as GPS,
RADAR, and SONAR. However, attempts at using time-of-flight for indoor
localization have failed to deliver acceptable accuracy due to fundamental
limitations in measuring time on Wi-Fi and other RF consumer technologies.
While the research community has developed alternatives for RF-based indoor
localization that do not require time-of-flight, those approaches have their
own limitations that hamper their use in practice. In particular, many existing
approaches need receivers with large antenna arrays while commercial Wi-Fi
nodes have two or three antennas. Other systems require fingerprinting the
environment to create signal maps. More fundamentally, none of these methods
support indoor positioning between a pair of Wi-Fi devices
without~third~party~support.
In this paper, we present a set of algorithms that measure the time-of-flight
to sub-nanosecond accuracy on commercial Wi-Fi cards. We implement these
algorithms and demonstrate a system that achieves accurate device-to-device
localization, i.e. enables a pair of Wi-Fi devices to locate each other without
any support from the infrastructure, not even the location of the access
points.Comment: 14 page
An Empirical Air-to-Ground Channel Model Based on Passive Measurements in LTE
In this paper, a recently conducted measurement campaign for
unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of
an in-service long-time-evolution (LTE) network which is deployed in a suburban
scenario were acquired. Five horizontal and five vertical flight routes were
considered. The channel impulse responses (CIRs) are extracted from the
received data by exploiting the cell specific signals (CRSs). Based on the
CIRs, the parameters of multipath components (MPCs) are estimated by using a
high-resolution algorithm derived according to the space-alternating
generalized expectation-maximization (SAGE) principle. Based on the SAGE
results, channel characteristics including the path loss, shadow fading, fast
fading, delay spread and Doppler frequency spread are thoroughly investigated
for different heights and horizontal distances, which constitute a stochastic
model.Comment: 15 pages, submitted version to IEEE Transactions on Vehicular
Technology. Current status: Early acces
Foldable all-textile cavity-backed slot antennas for personal UWB localization
An all-textile multimoded cavity-backed slot antenna has been designed and fabricated for body-worn impulse radio ultra-wideband (IR-UWB) operation in the 3,744-4,742.4 MHz frequency band, thereby covering Channels 2 and 3 of the IEEE 802.15.4a standard. Its light weight, mechanical flexibility, and small footprint of 35 mm x 56 mm facilitate integration into textile for radio communication equipment for first aid responders, personal locator beacons, and equipment for localization and medical monitoring of children or the elderly. The antenna features a stable radiation pattern and reflection coefficient in diverse operating conditions such as in free space, when subject to diverse bending radii and when deployed on the torso or upper right arm of a test person. The high isolation toward the wearer's body originates from the antenna's hemispherical radiation pattern with a -3 dB beamwidth of 120 degrees and a front-to-back ratio higher than 11 dB over the entire band. Moreover, the antenna exhibits a measured maximum gain higher than 6.3 dBi and a radiation efficiency over 75%. In addition, orientation-specific pulse distortion introduced by the antenna element is analyzed by means of the System Fidelity Factor (SFF). The SFF of the communication link between two instances of this antenna is higher than 94% for all directions within the antenna's -3 dB beamwidth. This easily wearable and deployable antenna is suitable to support IR-UWB localization with an accuracy in the order of 5 cm
- …