2,298 research outputs found
Cooperative monocular-based SLAM for multi-UAV systems in GPS-denied environments
This work presents a cooperative monocular-based SLAM approach for multi-UAV systems that can operate in GPS-denied environments. The main contribution of the work is to show that, using visual information obtained from monocular cameras mounted onboard aerial vehicles flying in formation, the observability properties of the whole system are improved. This fact is especially notorious when compared with other related visual SLAM configurations. In order to improve the observability properties, some measurements of the relative distance between the UAVs are included in the system. These relative distances are also obtained from visual information. The proposed approach is theoretically validated by means of a nonlinear observability analysis. Furthermore, an extensive set of computer simulations is presented in order to validate the proposed approach. The numerical simulation results show that the proposed system is able to provide a good position and orientation estimation of the aerial vehicles flying in formation.Peer ReviewedPostprint (published version
Visual servoing of an autonomous helicopter in urban areas using feature tracking
We present the design and implementation of a vision-based feature tracking system for an autonomous helicopter. Visual sensing is used for estimating the position and velocity of features in the image plane (urban features like windows) in order to generate velocity references for the flight control. These visual-based references are then combined with GPS-positioning references to navigate towards these features and then track them. We present results from experimental flight trials, performed in two UAV systems and under different conditions that show the feasibility and robustness of our approach
Mixed marker-based/marker-less visual odometry system for mobile robots
When moving in generic indoor environments, robotic platforms generally rely solely on information provided by onboard sensors to determine their position and orientation. However, the lack of absolute references often leads to the introduction of severe drifts in estimates computed, making autonomous operations really hard to accomplish. This paper proposes a solution to alleviate the impact of the above issues by combining two vision‐based pose estimation techniques working on relative and absolute coordinate systems, respectively. In particular, the unknown ground features in the images that are captured by the vertical camera of a mobile platform are processed by a vision‐based odometry algorithm, which is capable of estimating the relative frame‐to‐frame movements. Then, errors accumulated in the above step are corrected using artificial markers displaced at known positions in the environment. The markers are framed from time to time, which allows the robot to maintain the drifts bounded by additionally providing it with the navigation commands needed for autonomous flight. Accuracy and robustness of the designed technique are demonstrated using an off‐the‐shelf quadrotor via extensive experimental test
Real-time vehicle speed estimation using Unmanned Aerial Vehicles for traffic surveillance
Drones are an emerging tool for traffic surveillance; however, they inherently lack the capability to solely obtain vehicle speed on the road. This Bachelor's thesis presents the design, implementation and study of a system to detect the position, velocity and type of vehicles using the video stream obtained from drones. The solution is created to be used with any kind of aerial vehicle but is tailored for the drones in the European project LABYRINTH, of which the thesis has been a part. The tool utilizes the video feed from a sole camera and the telemetry data from the drone to detect, track and project the objects present on the road from the image into reality. This allows for an estimation of their position and speed. The detection and tracking algorithm implemented is the Simple Online Real Time algorithm, which is often referred to as SORT. Once the position has been acquired, another stream is generated that displays the same video, but with the bounding boxes, velocity and confidence ratings of all identified vehicles, with an overall computing time lower than the frame rate. After implementation, the tool underwent testing in a simulated environment to determine its assets and shortcomings, and was used during the LABYRINTH traffic monitoring flight tests. The Bachelor's thesis achieves the aimed objectives with minimum resource utilization, using readily available logic and open-source software to strike an optimal balance between real-time functionality and precise detection of vehicle position.Outgoin
Technical Challenges Associated with In-Air Wingtip Docking of Aircraft in Forward Flight
Autonomous in-air wingtip docking of aircraft offers significant opportunity for system level performance gains for numerous aircraft applications. Several of the technical challenges facing wingtip docking of fixed-wing aircraft are addressed in this paper, including: close proximity aerodynamic coupling; mechanisms and operations for robust docking; and relative state estimation methods. A simulation framework considering the aerodynamics, rigid-body dynamics, and vehicle controls is developed and used to perform docking sensitivity studies for a system of two 5.5% scale NASA Generic Transport Model aircraft. Additionally, proof of- concept testing of a candidate docking mechanism designed to move the primary wingtip vortex inboard suggests the viability of such an approach for achieving robust docking
Vision-Based navigation system for unmanned aerial vehicles
Mención Internacional en el título de doctorThe main objective of this dissertation is to provide Unmanned Aerial Vehicles
(UAVs) with a robust navigation system; in order to allow the UAVs to perform
complex tasks autonomously and in real-time. The proposed algorithms deal with
solving the navigation problem for outdoor as well as indoor environments, mainly
based on visual information that is captured by monocular cameras. In addition,
this dissertation presents the advantages of using the visual sensors as the main
source of data, or complementing other sensors in providing useful information; in
order to improve the accuracy and the robustness of the sensing purposes.
The dissertation mainly covers several research topics based on computer vision
techniques: (I) Pose Estimation, to provide a solution for estimating the 6D pose of
the UAV. This algorithm is based on the combination of SIFT detector and FREAK
descriptor; which maintains the performance of the feature points matching and decreases
the computational time. Thereafter, the pose estimation problem is solved
based on the decomposition of the world-to-frame and frame-to-frame homographies.
(II) Obstacle Detection and Collision Avoidance, in which, the UAV is able to
sense and detect the frontal obstacles that are situated in its path. The detection
algorithm mimics the human behaviors for detecting the approaching obstacles; by
analyzing the size changes of the detected feature points, combined with the expansion
ratios of the convex hull constructed around the detected feature points
from consecutive frames. Then, by comparing the area ratio of the obstacle and the
position of the UAV, the method decides if the detected obstacle may cause a collision.
Finally, the algorithm extracts the collision-free zones around the obstacle,
and combining with the tracked waypoints, the UAV performs the avoidance maneuver.
(III) Navigation Guidance, which generates the waypoints to determine
the flight path based on environment and the situated obstacles. Then provide
a strategy to follow the path segments and in an efficient way and perform the
flight maneuver smoothly. (IV) Visual Servoing, to offer different control solutions (Fuzzy Logic Control (FLC) and PID), based on the obtained visual information; in
order to achieve the flight stability as well as to perform the correct maneuver; to
avoid the possible collisions and track the waypoints.
All the proposed algorithms have been verified with real flights in both indoor
and outdoor environments, taking into consideration the visual conditions; such as
illumination and textures. The obtained results have been validated against other
systems; such as VICON motion capture system, DGPS in the case of pose estimate
algorithm. In addition, the proposed algorithms have been compared with several
previous works in the state of the art, and are results proves the improvement in
the accuracy and the robustness of the proposed algorithms.
Finally, this dissertation concludes that the visual sensors have the advantages
of lightweight and low consumption and provide reliable information, which is
considered as a powerful tool in the navigation systems to increase the autonomy
of the UAVs for real-world applications.El objetivo principal de esta tesis es proporcionar Vehiculos Aereos no Tripulados
(UAVs) con un sistema de navegacion robusto, para permitir a los UAVs realizar
tareas complejas de forma autonoma y en tiempo real. Los algoritmos propuestos
tratan de resolver problemas de la navegacion tanto en ambientes interiores como
al aire libre basandose principalmente en la informacion visual captada por las camaras
monoculares. Ademas, esta tesis doctoral presenta la ventaja de usar sensores
visuales bien como fuente principal de datos o complementando a otros sensores
en el suministro de informacion util, con el fin de mejorar la precision y la
robustez de los procesos de deteccion.
La tesis cubre, principalmente, varios temas de investigacion basados en tecnicas
de vision por computador: (I) Estimacion de la Posicion y la Orientacion
(Pose), para proporcionar una solucion a la estimacion de la posicion y orientacion
en 6D del UAV. Este algoritmo se basa en la combinacion del detector SIFT y el
descriptor FREAK, que mantiene el desempeno del a funcion de puntos de coincidencia
y disminuye el tiempo computacional. De esta manera, se soluciona el
problema de la estimacion de la posicion basandose en la descomposicion de las
homografias mundo a imagen e imagen a imagen. (II) Deteccion obstaculos y elusion
colisiones, donde el UAV es capaz de percibir y detectar los obstaculos frontales
que se encuentran en su camino. El algoritmo de deteccion imita comportamientos
humanos para detectar los obstaculos que se acercan, mediante el analisis de la
magnitud del cambio de los puntos caracteristicos detectados de referencia, combinado
con los ratios de expansion de los contornos convexos construidos alrededor
de los puntos caracteristicos detectados en frames consecutivos. A continuacion,
comparando la proporcion del area del obstaculo y la posicion del UAV, el metodo
decide si el obstaculo detectado puede provocar una colision. Por ultimo, el algoritmo
extrae las zonas libres de colision alrededor del obstaculo y combinandolo
con los puntos de referencia, elUAV realiza la maniobra de evasion. (III) Guiado de navegacion, que genera los puntos de referencia para determinar la trayectoria de
vuelo basada en el entorno y en los obstaculos detectados que encuentra. Proporciona
una estrategia para seguir los segmentos del trazado de una manera eficiente
y realizar la maniobra de vuelo con suavidad. (IV) Guiado por Vision, para ofrecer
soluciones de control diferentes (Control de Logica Fuzzy (FLC) y PID), basados en
la informacion visual obtenida con el fin de lograr la estabilidad de vuelo, asi como
realizar la maniobra correcta para evitar posibles colisiones y seguir los puntos de
referencia.
Todos los algoritmos propuestos han sido verificados con vuelos reales en ambientes
exteriores e interiores, tomando en consideracion condiciones visuales como
la iluminacion y las texturas. Los resultados obtenidos han sido validados con otros
sistemas: como el sistema de captura de movimiento VICON y DGPS en el caso del
algoritmo de estimacion de la posicion y orientacion. Ademas, los algoritmos propuestos
han sido comparados con trabajos anteriores recogidos en el estado del arte
con resultados que demuestran una mejora de la precision y la robustez de los algoritmos
propuestos.
Esta tesis doctoral concluye que los sensores visuales tienen las ventajes de tener
un peso ligero y un bajo consumo y, proporcionar informacion fiable, lo cual lo
hace una poderosa herramienta en los sistemas de navegacion para aumentar la
autonomia de los UAVs en aplicaciones del mundo real.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Carlo Regazzoni.- Secretario: Fernando García Fernández.- Vocal: Pascual Campoy Cerver
Remote inspection of wind turbine blades using UAV with photogrammetry payload
Visual Inspection is regularly used as a method of non-destructive testing (NDT) to find defects in large component structures. Wind turbine blades, regularly located in isolated environments, are typically difficult to access. In order to reduce operational and maintenance costs and extend asset lifetime, a project for the remote inspection of blades to accurately assess surface integrity is being undertaken. The remote inspection solution combines an unmanned aerial vehicle (UAV) with a photogrammetry payload to provide visual reconstruction of a blade for a holistic condition overview. Photogrammetric software is used to process the captured images to generate a 3D blade profile. A waypoint guidance algorithm controls the UAV to complete a full blade surface capture at constant distance, minimising motion blur. The results provide an accurate 3D reconstruction of the used blade complete with defects, discontinuities and markings and hence visual inspection using UAV combined with photogrammetry has been successfully implemented
A low-cost vision based navigation system for small size unmanned aerial vehicle applications
Not availabl
- …