Interconnect tree optimization algorithm in nanometer very large scale integration designs

This thesis proposes a graph-based maze routing and buffer insertion algorithm for nanometer Very Large Scale Integration (VLSI) layout designs. The algorithm is called Hybrid Routing Tree and Buffer insertion with Look-Ahead (HRTB-LA). In recent VLSI designs, interconnect delay becomes a dominant factor compared to gate delay. The well-known technique to minimize the interconnect delay is by inserting buffers along the interconnect wires. In conventional buffer insertion algorithms, the buffers are inserted on the fixed routing paths. However, in a modern design, there are macro blocks that prohibit any buffer insertion in their respective area. Most of the conventional buffer insertion algorithms do not consider these obstacles. In the presence of buffer obstacles, post routing algorithm may produce poor solution. On the other hand, simultaneous routing and buffer insertion algorithm offers a better solution, but it was proven to be NP-complete. Besides timing performance, power dissipation of the inserted buffers is another metric that needs to be optimized. Research has shown that power dissipation overhead due to buffer insertions is significantly high. In other words, interconnect delay and power dissipation move in opposite directions. Although many methodologies to optimize timing performance with power constraint have been proposed, no algorithm is based on grid graph technique. Hence, the main contribution of this thesis is an efficient algorithm using a hybrid approach for multi-constraint optimization in multi-terminal nets. The algorithm uses dynamic programming to compute the interconnect delay and power dissipation of the inserted buffers incrementally, while an effective runtime is achieved with the aid of novel look-ahead and graph pruning schemes. Experimental results prove that HRTB-LA is able to handle multi-constraint optimizations and produces up to 47% better solution compared to a post routing buffer insertion algorithm in comparable runtime

High-performance and Low-power Clock Network Synthesis in the Presence of Variation.

Semiconductor technology scaling requires continuous evolution of all aspects of physical design of integrated circuits. Among the major design steps, clock-network synthesis has been greatly affected by technology scaling, rendering existing methodologies inadequate. Clock routing was previously sufficient for smaller ICs, but design difficulty and structural complexity have greatly increased as interconnect delay and clock frequency increased in the 1990s. Since a clock network directly influences IC performance and often consumes a substantial portion of total power, both academia and industry developed synthesis methodologies to achieve low skew, low power and robustness from PVT variations. Nevertheless, clock network synthesis under tight constraints is currently the least automated step in physical design and requires significant manual intervention, undermining turn-around-time. The need for multi-objective optimization over a large parameter space and the increasing impact of process variation make clock network synthesis particularly challenging. Our work identifies new objectives, constraints and concerns in the clock-network synthesis for systems-on-chips and microprocessors. To address them, we generate novel clock-network structures and propose changes in traditional physical-design flows. We develop new modeling techniques and algorithms for clock power optimization subject to tight skew constraints in the presence of process variations. In particular, we offer SPICE-accurate optimizations of clock networks, coordinated to reduce nominal skew below 5 ps, satisfy slew constraints and trade-off skew, insertion delay and power, while tolerating variations. To broaden the scope of clock-network-synthesis optimizations, we propose new techniques and a methodology to reduce dynamic power consumption by 6.8%-11.6% for large IC designs with macro blocks by integrating clock network synthesis within global placement. We also present a novel non-tree topology that is 2.3x more power-efficient than mesh structures. We fuse several clock trees to create large-scale redundancy in a clock network to bridge the gap between tree-like and mesh-like topologies. Integrated optimization techniques for high-quality clock networks described in this dissertation strong empirical results in experiments with recent industry-released benchmarks in the presence of process variation. Our software implementations were recognized with the first-place awards at the ISPD 2009 and ISPD 2010 Clock-Network Synthesis Contests organized by IBM Research and Intel Research.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/89711/1/ejdjsy_1.pd

Buffered Steiner Trees for difficult instances

Buffer insertion has become an increasingly critical optimization in high performance design. The problem of finding a delay-optimal buffered Steiner tree has been an active area of research, and excellent solutions exist for most instances. However, current approaches fail to adequately solve a particular class of real-world "difficult" instances which are characterized by a large number of sinks, variations in sink criticalities, and varying polarity requirements. We propose a new Steiner tree construction called C-Tree for these instance types. When combined with van Ginneken style buffer insertion, C-Tree achieves higher quality solutions with fewer resources compared to traditional approaches

Power Management for Deep Submicron Microprocessors

As VLSI technology scales, the enhanced performance of smaller transistors comes at the expense of increased power consumption. In addition to the dynamic power consumed by the circuits there is a tremendous increase in the leakage power consumption which is further exacerbated by the increasing operating temperatures. The total power consumption of modern processors is distributed between the processor core, memory and interconnects. In this research two novel power management techniques are presented targeting the functional units and the global interconnects. First, since most leakage control schemes for processor functional units are based on circuit level techniques, such schemes inherently lack information about the operational profile of higher-level components of the system. This is a barrier to the pivotal task of predicting standby time. Without this prediction, it is extremely difficult to assess the value of any leakage control scheme. Consequently, a methodology that can predict the standby time is highly beneficial in bridging the gap between the information available at the application level and the circuit implementations. In this work, a novel Dynamic Sleep Signal Generator (DSSG) is presented. It utilizes the usage traces extracted from cycle accurate simulations of benchmark programs to predict the long standby periods associated with the various functional units. The DSSG bases its decisions on the current and previous standby state of the functional units to accurately predict the length of the next standby period. The DSSG presents an alternative to Static Sleep Signal Generation (SSSG) based on static counters that trigger the generation of the sleep signal when the functional units idle for a prespecified number of cycles. The test results of the DSSG are obtained by the use of a modified RISC superscalar processor, implemented by SimpleScalar, the most widely accepted open source vehicle for architectural analysis. In addition, the results are further verified by a Simultaneous Multithreading simulator implemented by SMTSIM. Leakage saving results shows an increase of up to 146% in leakage savings using the DSSG versus the SSSG, with an accuracy of 60-80% for predicting long standby periods. Second, chip designers in their effort to achieve timing closure, have focused on achieving the lowest possible interconnect delay through buffer insertion and routing techniques. This approach, though, taxes the power budget of modern ICs, especially those intended for wireless applications. Also, in order to achieve more functionality, die sizes are constantly increasing. This trend is leading to an increase in the average global interconnect length which, in turn, requires more buffers to achieve timing closure. Unconstrained buffering is bound to adversely affect the overall chip performance, if the power consumption is added as a major performance metric. In fact, the number of global interconnect buffers is expected to reach hundreds of thousands to achieve an appropriate timing closure. To mitigate the impact of the power consumed by the interconnect buffers, a power-efficient multi-pin routing technique is proposed in this research. The problem is based on a graph representation of the routing possibilities, including buffer insertion and identifying the least power path between the interconnect source and set of sinks. The novel multi-pin routing technique is tested by applying it to the ISPD and IBM benchmarks to verify the accuracy, complexity, and solution quality. Results obtained indicate that an average power savings as high as 32% for the 130-nm technology is achieved with no impact on the maximum chip frequency

A Multiple-objective ILP based Global Routing Approach for VLSI ASIC Design

A VLSI chip can today contain hundreds of millions transistors and is expected to contain more than 1 billion transistors in the next decade. In order to handle this rapid growth in integration technology, the design procedure is therefore divided into a sequence of design steps. Circuit layout is the design step in which a physical realization of a circuit is obtained from its functional description. Global routing is one of the key subproblems of the circuit layout which involves finding an approximate path for the wires connecting the elements of the circuit without violating resource constraints. The global routing problem is NP-hard, therefore, heuristics capable of producing high quality routes with little computational effort are required as we move into the Deep Sub-Micron (DSM) regime. In this thesis, different approaches for global routing problem are first reviewed. The advantages and disadvantages of these approaches are also summarized. According to this literature review, several mathematical programming based global routing models are fully investigated. Quality of solution obtained by these models are then compared with traditional Maze routing technique. The experimental results show that the proposed model can optimize several global routing objectives simultaneously and effectively. Also, it is easy to incorporate new objectives into the proposed global routing model. To speedup the computation time of the proposed ILP based global router, several hierarchical methods are combined with the flat ILP based global routing approach. The experimental results indicate that the bottom-up global routing method can reduce the computation time effectively with a slight increase of maximum routing density. In addition to wire area, routability, and vias, performance and low power are also important goals in global routing, especially in deep submicron designs. Previous efforts that focused on power optimization for global routing are hindered by excessively long run times or the routing of a subset of the nets. Accordingly, a power efficient multi-pin global routing technique (PIRT) is proposed in this thesis. This integer linear programming based techniques strives to find a power efficient global routing solution. The results indicate that an average power savings as high as 32\% for the 130-nm technology can be achieved with no impact on the maximum chip frequency

Design for manufacturing (DFM) in submicron VLSI design

As VLSI technology scales to 65nm and below, traditional communication between design and manufacturing becomes more and more inadequate. Gone are the days when designers simply pass the design GDSII file to the foundry and expect very good man¬ufacturing and parametric yield. This is largely due to the enormous challenges in the manufacturing stage as the feature size continues to shrink. Thus, the idea of DFM (Design for Manufacturing) is getting very popular. Even though there is no universally accepted definition of DFM, in my opinion, one of the major parts of DFM is to bring manufacturing information into the design stage in a way that is understood by designers. Consequently, designers can act on the information to improve both manufacturing and parametric yield. In this dissertation, I will present several attempts to reduce the gap between design and manufacturing communities: Alt-PSM aware standard cell designs, printability improve¬ment for detailed routing and the ASIC design flow with litho aware static timing analysis. Experiment results show that we can greatly improve the manufacturability of the designs and we can reduce design pessimism significantly for easier design closure

Strategic Optimization Techniques For FRTU Deployment and Chip Physical Design

Combinatorial optimization is a complex engineering subject. Although formulation often depends on the nature of problems that differs from their setup, design, constraints, and implications, establishing a unifying framework is essential. This dissertation investigates the unique features of three important optimization problems that can span from small-scale design automation to large-scale power system planning: (1) Feeder remote terminal unit (FRTU) planning strategy by considering the cybersecurity of secondary distribution network in electrical distribution grid, (2) physical-level synthesis for microfluidic lab-on-a-chip, and (3) discrete gate sizing in very-large-scale integration (VLSI) circuit. First, an optimization technique by cross entropy is proposed to handle FRTU deployment in primary network considering cybersecurity of secondary distribution network. While it is constrained by monetary budget on the number of deployed FRTUs, the proposed algorithm identi?es pivotal locations of a distribution feeder to install the FRTUs in different time horizons. Then, multi-scale optimization techniques are proposed for digital micro?uidic lab-on-a-chip physical level synthesis. The proposed techniques handle the variation-aware lab-on-a-chip placement and routing co-design while satisfying all constraints, and considering contamination and defect. Last, the first fully polynomial time approximation scheme (FPTAS) is proposed for the delay driven discrete gate sizing problem, which explores the theoretical view since the existing works are heuristics with no performance guarantee. The intellectual contribution of the proposed methods establishes a novel paradigm bridging the gaps between professional communities