1,352 research outputs found

    A Simple Cooperative Diversity Method Based on Network Path Selection

    Full text link
    Cooperative diversity has been recently proposed as a way to form virtual antenna arrays that provide dramatic gains in slow fading wireless environments. However most of the proposed solutions require distributed space-time coding algorithms, the careful design of which is left for future investigation if there is more than one cooperative relay. We propose a novel scheme, that alleviates these problems and provides diversity gains on the order of the number of relays in the network. Our scheme first selects the best relay from a set of M available relays and then uses this best relay for cooperation between the source and the destination. We develop and analyze a distributed method to select the best relay that requires no topology information and is based on local measurements of the instantaneous channel conditions. This method also requires no explicit communication among the relays. The success (or failure) to select the best available path depends on the statistics of the wireless channel, and a methodology to evaluate performance for any kind of wireless channel statistics, is provided. Information theoretic analysis of outage probability shows that our scheme achieves the same diversity-multiplexing tradeoff as achieved by more complex protocols, where coordination and distributed space-time coding for M nodes is required, such as those proposed in [7]. The simplicity of the technique, allows for immediate implementation in existing radio hardware and its adoption could provide for improved flexibility, reliability and efficiency in future 4G wireless systems.Comment: To appear, IEEE JSAC, special issue on 4

    Reliable multi-hop routing with cooperative transmissions in energy-constrained networks

    Get PDF
    We present a novel approach in characterizing the optimal reliable multi-hop virtual multiple-input single-output (vMISO) routing in ad hoc networks. Under a high node density regime, we determine the optimal cardinality of the cooperation sets at each hop on a path minimizing the total energy cost per transmitted bit. Optimal cooperating set cardinality curves are derived, and they can be used to determine the optimal routing strategy based on the required reliability, transmission power, and path loss coefficient. We design a new greedy geographical routing algorithm suitable for vMISO transmissions, and demonstrate the applicability of our results for more general networks

    Stochastic Geometry Analysis of a Class of Cooperative Relaying Protocols

    Get PDF
    This thesis examines wireless relay networks that use hybrid-ARQ protocols. Relays networks efficiently combat fading and exploit the spatial diversity present in the channel. Hybrid-ARQ involves retransmitting the signal if it is not decoded correctly. In conventional HARQ, the retransmission comes from the source, but in cooperative HARQ the retransmission could come from a relay that has successfully decoded the message, thus attaining transmit diversity.;A Markov chain model is conceived and used to compute the effective throughput and outage probability in the presence of Rayleigh fading. The analytical results are validated with simulations. The spatial configuration of the network plays an important role in the performance of the network. The behavior of the protocols for fixed network topologies and random topologies is examined. The impact of parameters such as path loss exponent, number of relays, and Signal to Noise Ratio are determined.;Spatial averaging is helpful in capturing the spatial variations present in the system. When network topology is random, the analysis proceeds by first assuming the number of relays is fixed, in which case they are drawn from a Binomial Point Process (BPP). For each network realization, the outage probability, throughput and effective throughput are found, and the spatial average of these quantities are found by averaging over a large number of network realizations. Moreover, the maximum throughput is found for each network realization, leading to a characterization of the distribution of throughputs achievable in a random network. Finally, networks with a random number of relays are considered, including the important case that the number of relays in a given area is Poisson distributed, in which case they are drawn from a Poisson Point Process (PPP)

    Fractional Power Control for Decentralized Wireless Networks

    Full text link
    We consider a new approach to power control in decentralized wireless networks, termed fractional power control (FPC). Transmission power is chosen as the current channel quality raised to an exponent -s, where s is a constant between 0 and 1. The choices s = 1 and s = 0 correspond to the familiar cases of channel inversion and constant power transmission, respectively. Choosing s in (0,1) allows all intermediate policies between these two extremes to be evaluated, and we see that usually neither extreme is ideal. We derive closed-form approximations for the outage probability relative to a target SINR in a decentralized (ad hoc or unlicensed) network as well as for the resulting transmission capacity, which is the number of users/m^2 that can achieve this SINR on average. Using these approximations, which are quite accurate over typical system parameter values, we prove that using an exponent of 1/2 minimizes the outage probability, meaning that the inverse square root of the channel strength is a sensible transmit power scaling for networks with a relatively low density of interferers. We also show numerically that this choice of s is robust to a wide range of variations in the network parameters. Intuitively, s=1/2 balances between helping disadvantaged users while making sure they do not flood the network with interference.Comment: 16 pages, in revision for IEEE Trans. on Wireless Communicatio

    Role of Interference and Computational Complexity in Modern Wireless Networks: Analysis, Optimization, and Design

    Get PDF
    Owing to the popularity of smartphones, the recent widespread adoption of wireless broadband has resulted in a tremendous growth in the volume of mobile data traffic, and this growth is projected to continue unabated. In order to meet the needs of future systems, several novel technologies have been proposed, including cooperative communications, cloud radio access networks (RANs) and very densely deployed small-cell networks. For these novel networks, both interference and the limited availability of computational resources play a very important role. Therefore, the accurate modeling and analysis of interference and computation is essential to the understanding of these networks, and an enabler for more efficient design.;This dissertation focuses on four aspects of modern wireless networks: (1) Modeling and analysis of interference in single-hop wireless networks, (2) Characterizing the tradeoffs between the communication performance of wireless transmission and the computational load on the systems used to process such transmissions, (3) The optimization of wireless multiple-access networks when using cost functions that are based on the analytical findings in this dissertation, and (4) The analysis and optimization of multi-hop networks, which may optionally employ forms of cooperative communication.;The study of interference in single-hop wireless networks proceeds by assuming that the random locations of the interferers are drawn from a point process and possibly constrained to a finite area. Both the information-bearing and interfering signals propagate over channels that are subject to path loss, shadowing, and fading. A flexible model for fading, based on the Nakagami distribution, is used, though specific examples are provided for Rayleigh fading. The analysis is broken down into multiple steps, involving subsequent averaging of the performance metrics over the fading, the shadowing, and the location of the interferers with the aim to distinguish the effect of these mechanisms that operate over different time scales. The analysis is extended to accommodate diversity reception, which is important for the understanding of cooperative systems that combine transmissions that originate from different locations. Furthermore, the role of spatial correlation is considered, which provides insight into how the performance in one location is related to the performance in another location.;While it is now generally understood how to communicate close to the fundamental limits implied by information theory, operating close to the fundamental performance bounds is costly in terms of the computational complexity required to receive the signal. This dissertation provides a framework for understanding the tradeoffs between communication performance and the imposed complexity based on how close a system operates to the performance bounds, and it allows to accurately estimate the required data processing resources of a network under a given performance constraint. The framework is applied to Cloud-RAN, which is a new cellular architecture that moves the bulk of the signal processing away from the base stations (BSs) and towards a centralized computing cloud. The analysis developed in this part of the dissertation helps to illuminate the benefits of pooling computing assets when decoding multiple uplink signals in the cloud. Building upon these results, new approaches for wireless resource allocation are proposed, which unlike previous approaches, are aware of the computing limitations of the network.;By leveraging the accurate expressions that characterize performance in the presence of interference and fading, a methodology is described for optimizing wireless multiple-access networks. The focus is on frequency hopping (FH) systems, which are already widely used in military systems, and are becoming more common in commercial systems. The optimization determines the best combination of modulation parameters (such as the modulation index for continuous-phase frequency-shift keying), number of hopping channels, and code rate. In addition, it accounts for the adjacent-channel interference (ACI) and determines how much of the signal spectrum should lie within the operating band of each channel, and how much can be allowed to splatter into adjacent channels.;The last part of this dissertation contemplates networks that involve multi-hop communications. Building on the analytical framework developed in early parts of this dissertation, the performance of such networks is analyzed in the presence of interference and fading, and it is introduced a novel paradigm for a rapid performance assessment of routing protocols. Such networks may involve cooperative communications, and the particular cooperative protocol studied here allows the same packet to be transmitted simultaneously by multiple transmitters and diversity combined at the receiver. The dynamics of how the cooperative protocol evolves over time is described through an absorbing Markov chain, and the analysis is able to efficiently capture the interference that arises as packets are periodically injected into the network by a common source, the temporal correlation among these packets and their interdependence

    Dispensing with channel estimation: differentially modulated cooperative wireless communications

    No full text
    As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective

    Multihop Routing in Ad Hoc Networks

    Full text link
    This paper presents a dual method of closed-form analysis and lightweight simulation that enables an evaluation of the performance of mobile ad hoc networks that is more realistic, efficient, and accurate than those found in existing publications. Some features accommodated by the new analysis are shadowing, exclusion and guard zones, and distance-dependent fading. Three routing protocols are examined: least-delay, nearest-neighbor, and maximum-progress routing. The tradeoffs among the path reliabilities, average conditional delays, average conditional number of hops, and area spectral efficiencies are examined.Comment: 6 pages, 6 figures, to appear in IEEE Military Commun. Conf. (MILCOM), 201
    corecore