909 research outputs found
Analog Signal Buffering and Reconstruction
Wireless sensor networks (WSNs) are capable of a myriad of tasks, from monitoring critical infrastructure such as bridges to monitoring a person\u27s vital signs in biomedical applications. However, their deployment is impractical for many applications due to their limited power budget. Sleep states are one method used to conserve power in resource-constrained systems, but they necessitate a wake-up circuit for detecting unpredictable events. In conventional wake-up-based systems, all information preceding a wake-up event will be forfeited. To avoid this data loss, it is necessary to include a buffer that can record prelude information without sacrificing the power savings garnered by the active use of sleep states.;Unfortunately, traditional memory buffer systems utilize digital electronics which are costly in terms of power. Instead of operating in the target signal\u27s native analog environment, a digital buffer must first expend a great deal of energy to convert the signal into a digital signal. This issue is further compounded by the use of traditional Nyquist sampling which does not adapt to the characteristics of a dynamically changing signal. These characteristics reveal why a digital buffer is not an appropriate choice for a WSN or other resource-constrained system.;This thesis documents the development of an analog pre-processing block that buffers an incoming signal using a new method of sampling. This method requires sampling only local maxima and minima (both amplitude and time), effectively approximating the instantaneous Nyquist rate throughout a time-varying signal. The use of this sampling method along with ultra-low-power analog electronics enables the entire system to operate in the muW power levels. In addition to these power saving techniques, a reconfigurable architecture will be explored as infrastructure for this system. This reconfigurable architecture will also be leveraged to explore wake-up circuits that can be used in parallel with the buffer system
FPGA-based architectures for acoustic beamforming with microphone arrays : trends, challenges and research opportunities
Over the past decades, many systems composed of arrays of microphones have been developed to satisfy the quality demanded by acoustic applications. Such microphone arrays are sound acquisition systems composed of multiple microphones used to sample the sound field with spatial diversity. The relatively recent adoption of Field-Programmable Gate Arrays (FPGAs) to manage the audio data samples and to perform the signal processing operations such as filtering or beamforming has lead to customizable architectures able to satisfy the most demanding computational, power or performance acoustic applications. The presented work provides an overview of the current FPGA-based architectures and how FPGAs are exploited for different acoustic applications. Current trends on the use of this technology, pending challenges and open research opportunities on the use of FPGAs for acoustic applications using microphone arrays are presented and discussed
Reconfigurable Architectures and Systems for IoT Applications
abstract: Internet of Things (IoT) has become a popular topic in industry over the recent years, which describes an ecosystem of internet-connected devices or things that enrich the everyday life by improving our productivity and efficiency. The primary components of the IoT ecosystem are hardware, software and services. While the software and services of IoT system focus on data collection and processing to make decisions, the underlying hardware is responsible for sensing the information, preprocess and transmit it to the servers. Since the IoT ecosystem is still in infancy, there is a great need for rapid prototyping platforms that would help accelerate the hardware design process. However, depending on the target IoT application, different sensors are required to sense the signals such as heart-rate, temperature, pressure, acceleration, etc., and there is a great need for reconfigurable platforms that can prototype different sensor interfacing circuits.
This thesis primarily focuses on two important hardware aspects of an IoT system: (a) an FPAA based reconfigurable sensing front-end system and (b) an FPGA based reconfigurable processing system. To enable reconfiguration capability for any sensor type, Programmable ANalog Device Array (PANDA), a transistor-level analog reconfigurable platform is proposed. CAD tools required for implementation of front-end circuits on the platform are also developed. To demonstrate the capability of the platform on silicon, a small-scale array of 24Ă—25 PANDA cells is fabricated in 65nm technology. Several analog circuit building blocks including amplifiers, bias circuits and filters are prototyped on the platform, which demonstrates the effectiveness of the platform for rapid prototyping IoT sensor interfaces.
IoT systems typically use machine learning algorithms that run on the servers to process the data in order to make decisions. Recently, embedded processors are being used to preprocess the data at the energy-constrained sensor node or at IoT gateway, which saves considerable energy for transmission and bandwidth. Using conventional CPU based systems for implementing the machine learning algorithms is not energy-efficient. Hence an FPGA based hardware accelerator is proposed and an optimization methodology is developed to maximize throughput of any convolutional neural network (CNN) based machine learning algorithm on a resource-constrained FPGA.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201
Energy-Sustainable IoT Connectivity: Vision, Technological Enablers, Challenges, and Future Directions
Technology solutions must effectively balance economic growth, social equity,
and environmental integrity to achieve a sustainable society. Notably, although
the Internet of Things (IoT) paradigm constitutes a key sustainability enabler,
critical issues such as the increasing maintenance operations, energy
consumption, and manufacturing/disposal of IoT devices have long-term negative
economic, societal, and environmental impacts and must be efficiently
addressed. This calls for self-sustainable IoT ecosystems requiring minimal
external resources and intervention, effectively utilizing renewable energy
sources, and recycling materials whenever possible, thus encompassing energy
sustainability. In this work, we focus on energy-sustainable IoT during the
operation phase, although our discussions sometimes extend to other
sustainability aspects and IoT lifecycle phases. Specifically, we provide a
fresh look at energy-sustainable IoT and identify energy provision, transfer,
and energy efficiency as the three main energy-related processes whose
harmonious coexistence pushes toward realizing self-sustainable IoT systems.
Their main related technologies, recent advances, challenges, and research
directions are also discussed. Moreover, we overview relevant performance
metrics to assess the energy-sustainability potential of a certain technique,
technology, device, or network and list some target values for the next
generation of wireless systems. Overall, this paper offers insights that are
valuable for advancing sustainability goals for present and future generations.Comment: 25 figures, 12 tables, submitted to IEEE Open Journal of the
Communications Societ
On the performance of a GPU-based SoC in a distributed spatial audio system
[EN] Many current system-on-chip (SoC) devices are composed of low-power multicore
processors combined with a small graphics accelerator (or GPU) offering a trade-off between computational capacity and low-power consumption. In this context, spatial audio methods such as wave field synthesis (WFS) can benefit from a distributed system composed of several SoCs that collaborate to tackle the high computational cost of rendering virtual sound sources. This paper aims at evaluating important aspects dealing with a distributed WFS implementation that runs over a network of Jetson Nano boards composed of embedded GPU-based SoCs: computational performance, energy efficiency, and synchronization issues. Our results show that the maximum efficiency is obtained when the WFS system operates the GPU frequency at 691.2 MHz, achieving 11 sources-per-Watt. Synchronization experiments using the NTP protocol show that the maximum initial delay of 10 ms between nodes does not prevent us from achieving high spatial sound quality.This work has been supported by the Spanish Government through TIN2017-82972-R, ESP2015-68245-C4-1-P, the Valencian Regional Government through PROMETEO/2019/109 and the Universitat Jaume I through UJI-B2019-36.Belloch, JA.; BadĂa, JM.; Larios, DF.; Personal, E.; Ferrer Contreras, M.; Fuster Criado, L.; Lupoiu, M.... (2021). On the performance of a GPU-based SoC in a distributed spatial audio system. The Journal of Supercomputing (Online). 77(7):6920-6935. https://doi.org/10.1007/s11227-020-03577-46920693577
State Estimation for Distributed and Hybrid Systems
This thesis deals with two aspects of recursive state estimation: distributed estimation and estimation for hybrid systems. In the first part, an approximate distributed Kalman filter is developed. Nodes update their state estimates by linearly combining local measurements and estimates from their neighbors. This scheme allows nodes to save energy, thus prolonging their lifetime, compared to centralized information processing. The algorithm is evaluated experimentally as part of an ultrasound based positioning system. The first part also contains an example of a sensor-actuator network, where a mobile robot navigates using both local sensors and information from a sensor network. This system was implemented using a component-based framework. The second part develops, a recursive joint maximum a posteriori state estimation scheme for Markov jump linear systems. The estimation problem is reformulated as dynamic programming and then approximated using so called relaxed dynamic programming. This allows the otherwise exponential complexity to be kept at manageable levels. Approximate dynamic programming is also used to develop a sensor scheduling algorithm for linear systems. The algorithm produces an offline schedule that when used together with a Kalman filter minimizes the estimation error covariance
Advances in integrating autonomy with acoustic communications for intelligent networks of marine robots
Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution February 2013Autonomous marine vehicles are increasingly used in clusters for an array of oceanographic
tasks. The effectiveness of this collaboration is often limited by communications:
throughput, latency, and ease of reconfiguration. This thesis argues that improved communication
on intelligent marine robotic agents can be gained from acting on knowledge
gained by improved awareness of the physical acoustic link and higher network layers by
the AUV’s decision making software.
This thesis presents a modular acoustic networking framework, realized through a
C++ library called goby-acomms, to provide collaborating underwater vehicles with an
efficient short-range single-hop network. goby-acomms is comprised of four components
that provide: 1) losslessly compressed encoding of short messages; 2) a set of message
queues that dynamically prioritize messages based both on overall importance and time
sensitivity; 3) Time Division Multiple Access (TDMA) Medium Access Control (MAC) with
automatic discovery; and 4) an abstract acoustic modem driver.
Building on this networking framework, two approaches that use the vehicle’s “intelligence”
to improve communications are presented. The first is a “non-disruptive”
approach which is a novel technique for using state observers in conjunction with an entropy
source encoder to enable highly compressed telemetry of autonomous underwater
vehicle (AUV) position vectors. This system was analyzed on experimental data and implemented
on a fielded vehicle. Using an adaptive probability distribution in combination
with either of two state observer models, greater than 90% compression, relative to
a 32-bit integer baseline, was achieved.
The second approach is “disruptive,” as it changes the vehicle’s course to effect an improvement
in the communications channel. A hybrid data- and model-based autonomous
environmental adaptation framework is presented which allows autonomous underwater
vehicles (AUVs) with acoustic sensors to follow a path which optimizes their ability to
maintain connectivity with an acoustic contact for optimal sensing or communication.I wish to acknowledge the sponsors of this research for their generous support
of my tuition, stipend, and research: the WHOI/MIT Joint Program, the MIT Presidential Fellowship, the Office of Naval Research (ONR) # N00014-08-1-0011, # N00014-08-1-0013, and the ONR PlusNet Program Graduate Fellowship, the Defense Advanced Research Projects Agency (DARPA) (Deep Sea Operations: Applied Physical Sciences (APS) Award # APS 11-15 3352-006, APS 11-15-3352-215 ST 2.6 and 2.7
- …