Performance evaluation of a six-axis generalized force-reflecting teleoperator

Work in real-time distributed computation and control has culminated in a prototype force-reflecting telemanipulation system having a dissimilar master (cable-driven, force-reflecting hand controller) and a slave (PUMA 560 robot with custom controller), an extremely high sampling rate (1000 Hz), and a low loop computation delay (5 msec). In a series of experiments with this system and five trained test operators covering over 100 hours of teleoperation, performance was measured in a series of generic and application-driven tasks with and without force feedback, and with control shared between teleoperation and local sensor referenced control. Measurements defining task performance included 100-Hz recording of six-axis force/torque information from the slave manipulator wrist, task completion time, and visual observation of predefined task errors. The task consisted of high precision peg-in-hole insertion, electrical connectors, velcro attach-de-attach, and a twist-lock multi-pin connector. Each task was repeated three times under several operating conditions: normal bilateral telemanipulation, forward position control without force feedback, and shared control. In shared control, orientation was locally servo controlled to comply with applied torques, while translation was under operator control. All performance measures improved as capability was added along a spectrum of capabilities ranging from pure position control through force-reflecting teleoperation and shared control. Performance was optimal for the bare-handed operator

Disturbance observer based bilateral control systems

Bilateral teleoperation is becoming one of the far reaching application areas of robotics science. Enabling a human operator the ability to reach and manipulate a remote location will be possible with the various applications of bilateral control. In that sense, ideal bilateral control allows extension of a person's sensing to a remote environment by a master slave structure. So, the coupled goals of bilateral control is to enforce the slave system track the motion generated on the master system and to reflect the forces from the slave system. This thesis investigates the current state of the art in bilateral teleoperation. For that purpose, design and analysis of bilateral control is made based on the use of disturbance observers. First, a known control structure is investigated in the context of acceleration control. Following this, a case study is made to show a different application of bilateral control, namely grasping force control. Performance improvement in bilateral control is also studied and correspondingly, a novel functional observer is proposed for better estimation of velocity, acceleration and disturbance. In the second half of the thesis, bilateral control with time delay is realized. Design is made via separating the position and force into two different loops. For position control under time delay, a previously proposed control scheme is used in which use of communication disturbance observer with convergence terms was discussed. Observation made about the divergence from the master reference under contact motion is analyzed and a model following control structure is proposed to eliminate the remaining disturbance from the slave plant. For force control under time delay, first the response of a local controller is analyzed. In order to improve the system transparency, a new method is proposed in which environment stiffness was used for force control loop rather than the delayed slave force. In this structure, estimation of environment stiffness was made via an indirect adaptive control scheme. The analyzed structures were also tested experimentally under a master slave system consisting of 1 DOF linear motors. Experiments show the validity of the contributions made for bilateral control with and without time delay

Force reflecting joystick control for applications to bilateral teleoperation in construction machinery

This paper presents a simple and effective force reflecting joystick controller for applications to bilateral teleoperation in construction machinery. First, this controller is a combination of an advanced force reflecting gain tuner and two local adaptive controllers, master and slave. Second, the force reflecting gain tuner is effectively designed using recursive least square method and fuzzy logics to estimate directly and accurately the environmental characteristics and, consequently, to produce properly a force reflection. Third, the local adaptive controllers are simply designed using fuzzy technique and optimized using a smart leaning mechanism to ensure that the slave follows well any given trajectory while the operator is able to achieve truly physical perception of interactions at the remote site. An experimental master-slave manipulator is setup and real-time control tests are carried out under various environmental conditions to evaluate the effectiveness of the proposed controller

Model reference adaptive control for telemanipulation

A 1-DOF (degree-of-freedom) telemanipulation system is presented in this paper. The paper focuses on disturbance compensation of the haptic force feedback. The master and slave devices are connected via serial ports. The mechanism, which is applied as a human interface device, is subject to perceptible internal friction that must be eliminated. As a result, the operator would only feel the force feedback from the manipulated environment. The main contribution of this paper is the presentation of the telemanipulation device with a model reference adaptive control that compensates for the friction force using a direct model-based sliding mode algorithm

Control of Cooperative Haptics-Enabled Teleoperation Systems with Application to Minimally Invasive Surgery

Robot-Assisted Minimally Invasive Surgical (RAMIS) systems frequently have a structure of cooperative teleoperator systems where multiple master-slave pairs are used to collaboratively execute a task. Although multiple studies indicate that haptic feedback improves the realism of tool-tissue interaction to the surgeon and leads to better performance for surgical procedures, current telesurgical systems typically do not provide force feedback, mainly because of the inherent stability issues. The research presented in this thesis is directed towards the development of control algorithms for force reflecting cooperative surgical teleoperator systems with improved stability and transparency characteristics. In the case of cooperative force reflecting teleoperation over networks, conventional passivity based approaches may have limited applicability due to potentially non-passive slave-slave interactions and irregular communication delays imposed by the network. In this thesis, an alternative small gain framework for the design of cooperative network-based force reflecting teleoperator systems is developed. Using the small gain framework, control algorithms for cooperative force-reflecting teleoperator systems are designed that guarantee stability in the presence of multiple network-induced communication constraints. Furthermore, the design conservatism typically associated with the small-gain approach is eliminated by using the Projection-Based Force Reflection (PBFR) algorithms. Stability results are established for networked cooperative teleoperator systems under different types of force reflection algorithms in the presence of irregular communication delays. The proposed control approach is consequently implemented on a dual-arm (two masters/two slaves) robotic MIS testbed. The testbed consists of two Haptic Wand devices as masters and two PA10-7C robots as the slave manipulators equipped with da Vinci laparoscopic surgical instruments. The performance of the proposed control approach is evaluated in three different cooperative surgical tasks, which are knot tightening, pegboard transfer, and object manipulation. The experimental results obtained indicate that the PBFR algorithms demonstrate statistically significant performance improvement in comparison with the conventional direct force reflection algorithms. One possible shortcoming of using PBFR algorithms is that implementation of these algorithms may lead to attenuation of the high-frequency component of the contact force which is important, in particular, for haptic perception of stiff surfaces. In this thesis, a solution to this problem is proposed which is based on the idea of separating the different frequency bands in the force reflection signal and consequently applying the projection-based principle to the low-frequency component, while reflecting the high-frequency component directly. The experimental results demonstrate that substantial improvement in transient fidelity of the force feedback is achieved using the proposed method without negative effects on the stability of the system

Force-Sensor-Less Bilateral Teleoperation Control of Dissimilar Master-Slave System With Arbitrary Scaling

This study designs a high-precision bilateral teleoperation control for a dissimilar master-slave system. The proposed nonlinear control design takes advantage of a novel subsystem-dynamics-based control method that allows designing of individual (decentralized) model-based controllers for the manipulators locally at the subsystem level. Very importantly, a dynamic model of the human operator is incorporated into the control of the master manipulator. The individual controllers for the dissimilar master and slave manipulators are connected in a specific communication channel for the bilateral teleoperation to function. Stability of the overall control design is rigorously guaranteed with arbitrary time delays. Novel features of this study include the completely force-sensor-less design for the teleoperation system with a solution for a uniquely introduced computational algebraic loop, a method of estimating the exogenous operating force of an operator and the use of a commercial haptic manipulator. Most importantly, we conduct experiments on a dissimilar system in two degrees of freedom (DOFs). As an illustration of the performance of the proposed system, a force scaling factor of up to 800 and position scaling factor of up to 4 was used in the experiments. The experimental results show an exceptional tracking performance, verifying the real-world performance of the proposed concept.publishedVersionPeer reviewe

A Cost-Effective Haptic Device for Assistive and Rehabilitation Purposes

With the growing population of elderly, the need for assistance has also increased considerably especially for the tasks such as cleaning, reaching and grasping objects among others. There are numerous assistive devices in the market for this group of people. However, they are either too expensive or require overwhelming user effort for manipulation. Therefore, the presented research is primarily concerned with developing a low-cost, easy to use assistive device for elderly to reach and grasp objects through intuitive interface for the control of a slave anthropomorphic robotic arm (tele operator). The system also implements haptic feedback technology that enables the user to maneuver the grasping task in a realistic manner. A bilateral master-slave robotic system combined with the haptic feedback technology has been designed, built and tested to determine the suitability of this device for the chosen application. The final prototype consists of primarily off the shelf components programmed in such a way as to provide accurate teleoperation and haptic feedback to the user. While the nature of the project as a prototype precluded any patient trials, testing of the final system has shown that a fairly low cost device can be capable of providing the user an ability to remotely control a robotic arm for reaching and grasping objects with accurate force feedback

A prototype telerobotic platform for live transmission line maintenance: review of design and development.

This paper reports technical design of a novel experimental test facility, using haptic-enabled teleoperation of robotic manipulators, for live transmission line maintenance. The goal is to study and develop appropriate techniques in repair overhead power transmission lines by allowing linemen to wirelessly guide a remote manipulator, installed on a crane bucket, to execute dexterous maintenance tasks, such as twisting a tie wire around a cable. Challenges and solutions for developing such a system are outlined. The test facility consists of a PHANToM Desktop haptic device (master site), an industrial hydraulic manipulator (slave site) mounted atop a Stewart platform, and a wireless communication channel connecting the master and slave sites. The teleoperated system is tested under different force feedback schemes, while the base is excited and the communication channel is delayed and/or lossy to emulate realistic network behaviors. The force feedback schemes are: virtual fixture, augmentation force and augmented virtual fixture. Performance of each scheme is evaluated under three measures: task completion time, number of failed trials and displacement of the slave manipulator end-effector. The developed test rig has been shown to be successful in performing haptic-enabled teleoperation for live-line maintenance in a laboratory setting. The authors aim at establishing a benchmark test facility for objective evaluation of ideas and concepts in the teleoperation of live-line maintenance tasks