MONICA in Hamburg: Towards Large-Scale IoT Deployments in a Smart City

Modern cities and metropolitan areas all over the world face new management challenges in the 21st century primarily due to increasing demands on living standards by the urban population. These challenges range from climate change, pollution, transportation, and citizen engagement, to urban planning, and security threats. The primary goal of a Smart City is to counteract these problems and mitigate their effects by means of modern ICT to improve urban administration and infrastructure. Key ideas are to utilise network communication to inter-connect public authorities; but also to deploy and integrate numerous sensors and actuators throughout the city infrastructure - which is also widely known as the Internet of Things (IoT). Thus, IoT technologies will be an integral part and key enabler to achieve many objectives of the Smart City vision. The contributions of this paper are as follows. We first examine a number of IoT platforms, technologies and network standards that can help to foster a Smart City environment. Second, we introduce the EU project MONICA which aims for demonstration of large-scale IoT deployments at public, inner-city events and give an overview on its IoT platform architecture. And third, we provide a case-study report on SmartCity activities by the City of Hamburg and provide insights on recent (on-going) field tests of a vertically integrated, end-to-end IoT sensor application.Comment: 6 page

A survey of communication protocols for internet of things and related challenges of fog and cloud computing integration

The fast increment in the number of IoT (Internet of Things) devices is accelerating the research on new solutions to make cloud services scalable. In this context, the novel concept of fog computing as well as the combined fog-to-cloud computing paradigm is becoming essential to decentralize the cloud, while bringing the services closer to the end-system. This article surveys e application layer communication protocols to fulfill the IoT communication requirements, and their potential for implementation in fog- and cloud-based IoT systems. To this end, the article first briefly presents potential protocol candidates, including request-reply and publish-subscribe protocols. After that, the article surveys these protocols based on their main characteristics, as well as the main performance issues, including latency, energy consumption, and network throughput. These findings are thereafter used to place the protocols in each segment of the system (IoT, fog, cloud), and thus opens up the discussion on their choice, interoperability, and wider system integration. The survey is expected to be useful to system architects and protocol designers when choosing the communication protocols in an integrated IoT-to-fog-to-cloud system architecture.Peer ReviewedPostprint (author's final draft

Fog Protocol and FogKit: A JSON-Based Protocol and Framework for Communication Between Bluetooth-Enabled Wearable Internet of Things Devices

Advancements in technology have brought about a wide variety of devices, such as embedded devices with sensors and actuators, personal computers, smart devices, and health devices. Many of these devices are categorized as “wearables,” meaning that they are intended to be carried and used on one’s body. As this category increases in popularity and functionality, developers will need a convenient way for these devices to communicate with each other and store information in a standardized and ecient manner. The Fog protocol and FogKit framework developed and demonstrated for this thesis address these issues by providing a set of powerful features, including data posting, data querying, event notifications, and network status requests. These features are defined as convenient JSON formatted messages which can be communicated between Bluetooth peripherals using an iOS device running FogKit as router and server

Secure store and forward proxy for dynamic IoT applications over M2M networks

Internet of Things (IoT) applications are expected to generate a huge unforeseen amount of traffic flowing from Consumer Electronics devices to the network. In order to overcome existing interoperability problems, several standardization bodies have joined to bring a new generation of Machine to Machine (M2M) networks as a result of the evolution of wireless sensor/actor networks and mobile cellular networks to converged networks. M2M is expected to enable IoT paradigms and related concepts into a reality at a reasonable cost. As part of the convergence, several technologies preventing new IoT services to interfere with existing Internet services are flourishing. Responsive, message-driven, resilient and elastic architectures are becoming essential parts of the system. These architectures will control the entire data flow for an IoT system requiring sometimes to store, shape and forward data among nodes of a M2M network to improve network performance. However, IoT generated data have an important personal component since it is generated in personal devices or are the result of the observation of the physical world, so rises significant security concerns. This article proposes a novel opportunistic flexible secure store and forward proxy for M2M networks and its mapping to asynchronous protocols that guarantees data confidentiality

Integration of a cellular Internet-of-Things transceiver into 6G test network and evaluation of its performance

Abstract. This thesis focuses on the integration and deployment of an aftermarket cellular IoT transceiver on a 6G/5G test network for the purpose of evaluating the feasibility of such device for monitoring the network performance. The cellular technology employed was NB-IoT paired with a Raspberry Pi device as the microprocessor that collects network telemetry and uses MQTT protocol to provide constant data feed. The system was first tested in a public cellular network through a local service provider and was successfully connected to the network, establishing TCP/IP connections, and allowing internet connectivity. To monitor network information and gathering basic telemetry data, a network monitoring utility was developed. It collected data such as network identifiers, module registration status, band/channel, signal strength and GPS position. This data was then published to a MQTT broker. The Adafruit IO platform served as the MQTT broker, providing an interface to visualize the collected data. Furthermore, the system was configured for and deployed on a 6G/5G test network successfully. The device functionality that was developed and tested in the public network remained intact, enabling continuous monitoring and analysis of network data. Through this study, valuable insights into the integration and deployment of cellular IoT transceivers into cellular networks that employ the latest IoT technology were gained. The findings highlight the feasibility of utilizing such a system for network monitoring and demonstrate the potential for IoT applications in cellular networks

Development of a wireless sensor network for agricultural monitoring for Internet of Things (IoT)

Monitoring of the agricultural environment has become an important area of control and protection which provides real-time system and control communication with the physical world. This thesis focuses on Development ofa wireless Sensor Network for agricultural monitoring for Internet of things (IoT) to monitor environmental condition. Among the various technologies for Agriculture monitoring, Wireless Sensor Networks (WSNs) are perceived as an amazing one to gather and process information in the agricultural area with low-cost and low-energy consumption. WSN is capable of providing processed field data in real time from sensors which are physically distributed in the field. Agriculture and farming are one of the industries which have a late occupied their regards for WSNs, looking for this financially acute innovation to improve its production and upgrade agribusiness yield standard. Wireless Sensor Networks (WSNs) have pulled in a lot consideration in recent years.The proposed system uses WSN sensors to capture and track information pertaining to crop growth condition outside and inside greenhouses. 6LowPAN network protocol is used for low power consumption and for transmitting and receiving of data packets.This thesis introduces the agricultural monitoring system's hardware design, system architecture, and software process control. Agriculture monitoring system set-up is based on Contiki OS while device testing is carried out using real-time farm information and historical dat

System for monitoring and supporting the treatment of sleep apnea using IoT and big data

[EN] Sleep apnea has become in the sleep disorder that causes greater concern in recent years due to its morbidity and mortality, higher medical care costs and poor people quality of life. Some proposals have addressed sleep apnea disease in elderly people, but they have still some technical limitations. For these reasons, this paper presents an innovative system based on fog and cloud computing technologies which in combination with IoT and big data platforms offers new opportunities to build novel and innovative services for supporting the sleep apnea and to overcome the current limitations. Particularly, the system is built on several low-power wireless networks with heterogeneous smart devices (i.e, sensors and actuators). In the fog, an edge node (Smart IoT Gateway) provides IoT connection and interoperability and pre-processing IoT data to detect events in real-time that might endanger the elderly's health and to act accordingly. In the cloud, a Generic Enabler Context Broker manages, stores and injects data into the big data analyzer for further processing and analyzing. The system's performance and subjective applicability are evaluated using over 30 GB size datasets and a questionnaire fulfilled by medicals specialist, respectively. Results show that the system data analytics improve the health professionals' decision making to monitor and guide sleep apnea treatment, as well as improving elderly people's quality of life. (C) 2018 Elsevier B.V. All rights reserved.This research was supported by the Ecuadorian Government through the Secretary of Higher Education, Science, Technology, and Innovation (SENESCYT) and has received funding from the European Union's "Horizon 2020'' research and innovation program as part of the ACTIVAGE project under Grant 732679 and the Interoperability of Heterogeneous IoT Platforms project (INTER-IoT) under Grant 687283.Yacchirema-Vargas, DC.; Sarabia-Jácome, DF.; Palau Salvador, CE.; Esteve Domingo, M. (2018). System for monitoring and supporting the treatment of sleep apnea using IoT and big data. Pervasive and Mobile Computing. 50:25-40. https://doi.org/10.1016/j.pmcj.2018.07.007S25405