MOSAR : Modular spacecraft assembly and reconfiguration demonstrator

With rapid development of space systems in recent years and their limited lives, it is imperative that a sustainable space development approach is developed to support more affordable access to space for all stakeholders. The European Commission hence funded the MOSAR project which aims to create a new paradigm technology to address this increasing challenge. This paper provides an overview of this technology’s preliminary development to enable on-orbit servicing. Building on five successful projects which collectively created all required common building blocks for both planetary explorations and in-orbit missions, a novel architecture is proposed to create a walking manipulator to demonstrate its unique capability in both space system assembly and on-orbit servicing. Preliminary design concepts of a walking manipulator and spacecraft modules are shown. A dedicated simulator is also developed to evaluate the proposed novel architecture for these targeted applications

Hardware Architecture Review of Swarm Robotics System: Self-Reconfigurability, Self-Reassembly, and Self-Replication

Swarm robotics is one of the most fascinating and new research areas of recent decades, and one of the grand challenges of robotics is the design of swarm robots that are self-sufficient. This can be crucial for robots exposed to environments that are unstructured or not easily accessible for a human operator, such as the inside of a blood vessel, a collapsed building, the deep sea, or the surface of another planet. In this paper, we present a comprehensive study on hardware architecture and several other important aspects of modular swarm robots, such as self-reconfigurability, self-replication, and self-assembly. The key factors in designing and building a group of swarm robots are cost and miniaturization with robustness, flexibility, and scalability. In robotics intelligence, self-assembly and self-reconfigurability are among the most important characteristics as they can add additional capabilities and functionality to swarm robots. Simulation and model design for swarm robotics is highly complex and expensive, especially when attempting to model the behavior of large swarm robot groups.http://dx.doi.org/10.5402/2013/84960

CIS-lunar space infrastructure lunar technologies: Executive summary

Technologies necessary for the creation of a cis-Lunar infrastructure, namely: (1) automation and robotics; (2) life support systems; (3) fluid management; (4) propulsion; and (5) rotating technologies, are explored. The technological focal point is on the development of automated and robotic systems for the implementation of a Lunar Oasis produced by Automation and Robotics (LOAR). Under direction from the NASA Office of Exploration, automation and robotics were extensively utilized as an initiating stage in the return to the Moon. A pair of autonomous rovers, modular in design and built from interchangeable and specialized components, is proposed. Utilizing a buddy system, these rovers will be able to support each other and to enhance their individual capabilities. One rover primarily explores and maps while the second rover tests the feasibility of various materials-processing techniques. The automated missions emphasize availability and potential uses of Lunar resources, and the deployment and operations of the LOAR program. An experimental bio-volume is put into place as the precursor to a Lunar environmentally controlled life support system. The bio-volume will determine the reproduction, growth and production characteristics of various life forms housed on the Lunar surface. Physicochemical regenerative technologies and stored resources will be used to buffer biological disturbances of the bio-volume environment. The in situ Lunar resources will be both tested and used within this bio-volume. Second phase development on the Lunar surface calls for manned operations. Repairs and re-configuration of the initial framework will ensue. An autonomously-initiated manned Lunar oasis can become an essential component of the United States space program

Unifying Distributed Processing and Open Hypertext through a Heterogeneous Communication Model

A successful distributed open hypermedia system can be characterised by a scaleable architecture which is inherently distributed. While the architects of distributed hypermedia systems have addressed the issues of providing and retrieving distributed resources, they have often neglected to design systems with the inherent capability to exploit the distributed processing of this information. The research presented in this paper describes the construction and use of an open hypermedia system concerned equally with both of these facets

Ground-Based 1U CubeSat Robotic Assembly Demonstration

Key gaps limiting in-space assembly of small satellites are (1) the lack of standardization of electromechanical CubeSat components for compatibility with commercial robotic assembly hardware, and (2) testing and modifying commercial robotic assembly hardware suitable for small satellite assembly for space operation. Working toward gap (1), the lack of standardization of CubeSat components for compatibility with commercial robotic assembly hardware, we have developed a ground-based robotic assembly of a 1U CubeSat using modular components and Commercial-Off-The-Shelf (COTS) robot arms without humans-in-the-loop. Two 16 in x 7 in x 7 in dexterous robot arms, weighing 2 kg each, are shown to work together to grasp and assemble CubeSat components into a 1U CubeSat. Addressing gap (2) in this work, solutions for adapting power-efficient COTS robot arms to assemble highly-capable CubeSats are examined. Lessons learned on thermal and power considerations for overheated motors and positioning errors were also encountered and resolved. We find that COTS robot arms with sustained throughput and processing efficiency have the potential to be cost-effective for future space missions. The two robot arms assembled a 1U CubeSat prototype in less than eight minutes

A Quantitative Approach to Assessing System Evolvability

When selecting a system from multiple candidates, the customer seeks the one that best meets his or her needs. Recently the desire for evolvable systems has become more important and engineers are striving to develop systems that accommodate this need. In response to this search for evolvability, we present a historical perspective on evolvability, propose a refined definition of evolvability, and develop a quantitative method for measuring this property. We address this quantitative methodology from both a theoretical and practical perspective. This quantitative model is then applied to the problem of evolving a lunar mission to a Mars mission as a case study

System configuration and executive requirements specifications for reusable shuttle and space station/base

System configuration and executive requirements specifications for reusable shuttle and space station/bas