Energy challenges for ICT

The energy consumption from the expanding use of information and communications technology (ICT) is unsustainable with present drivers, and it will impact heavily on the future climate change. However, ICT devices have the potential to contribute signi - cantly to the reduction of CO2 emission and enhance resource e ciency in other sectors, e.g., transportation (through intelligent transportation and advanced driver assistance systems and self-driving vehicles), heating (through smart building control), and manu- facturing (through digital automation based on smart autonomous sensors). To address the energy sustainability of ICT and capture the full potential of ICT in resource e - ciency, a multidisciplinary ICT-energy community needs to be brought together cover- ing devices, microarchitectures, ultra large-scale integration (ULSI), high-performance computing (HPC), energy harvesting, energy storage, system design, embedded sys- tems, e cient electronics, static analysis, and computation. In this chapter, we introduce challenges and opportunities in this emerging eld and a common framework to strive towards energy-sustainable ICT

Hardware Specific Integration Strategy for Impedance-Based Structural Health Monitoring of Aerospace Systems

The Integrated Vehicle Health Management (IVHM) Project, sponsored by NASA's Aeronautics Research Mission Directorate, is conducting research to advance the state of highly integrated and complex flight-critical health management technologies and systems. An effective IVHM system requires Structural Health Monitoring (SHM). The impedance method is one such SHM technique for detection and monitoring complex structures for damage. This position paper on the impedance method presents the current state of the art, future directions, applications and possible flight test demonstrations

Design methodology for thermal management using embedded thermoelectric devices

The main objectives of this dissertation is to investigate the prospects of embedded thermoelectric devices integrated in a chip package and to develop a design methodology aimed at taking advantage of the on-chip on-demand cooling capabilities of the thermoelectric devices. First a simulation framework is established and validated against experimental results, which helps to study the cooling capabilities of embedded thermoelectric coolers (TEC) in both a transient and steady state. The potential for up to 15°C of total cooling has been shown. The thermal simulation framework allows for rapid assessment of TEC and system level thermal performance. Next, the thesis develops a co-simulation environment that is capable of simulating the thermal and electrical domain and couples them to design intelligent TEC controllers. These controllers are implemented on chip and can leverage the transient cooling capability of the device. The controllers are simulated within the co-simulation environment and their potential to control high power chip events are thoroughly investigated. The system level overheads are considered and discussions on implementation techniques are presented. The co-simulation framework is also extended to allow for simulation of real predictive technology microprocessor cores and their workloads. Finally the thesis implements a fully on-chip autonomous energy system that takes advantage of the TEC in its reverse energy harvesting mode and uses the same device to harvest energy and use the energy to power the on-chip cooling circuit. This increases the overall energy efficiency of the cooler and verifies the TEC control methods.Ph.D

Energy challenges for ICT

The energy consumption from the expanding use of information and communications technology (ICT) is unsustainable with present drivers, and it will impact heavily on the future climate change. However, ICT devices have the potential to contribute significantly to the reduction of CO2 emission and enhance resource efficiency in other sectors, e.g., transportation (through intelligent transportation and advanced driver assistance systems and self-driving vehicles), heating (through smart building control), and manufacturing (through digital automation based on smart autonomous sensors). To address the energy sustainability of ICT and capture the full potential of ICT in resource efficiency, a multidisciplinary ICT-energy community needs to be brought together covering devices, microarchitectures, ultra large-scale integration (ULSI), high-performance computing (HPC), energy harvesting, energy storage, system design, embedded systems, efficient electronics, static analysis, and computation. In this chapter, we introduce challenges and opportunities in this emerging field and a common framework to strive towards energy-sustainable ICT

Improving processor efficiency through thermal modeling and runtime management of hybrid cooling strategies

One of the main challenges in building future high performance systems is the ability to maintain safe on-chip temperatures in presence of high power densities. Handling such high power densities necessitates novel cooling solutions that are significantly more efficient than their existing counterparts. A number of advanced cooling methods have been proposed to address the temperature problem in processors. However, tradeoffs exist between performance, cost, and efficiency of those cooling methods, and these tradeoffs depend on the target system properties. Hence, a single cooling solution satisfying optimum conditions for any arbitrary system does not exist. This thesis claims that in order to reach exascale computing, a dramatic improvement in energy efficiency is needed, and achieving this improvement requires a temperature-centric co-design of the cooling and computing subsystems. Such co-design requires detailed system-level thermal modeling, design-time optimization, and runtime management techniques that are aware of the underlying processor architecture and application requirements. To this end, this thesis first proposes compact thermal modeling methods to characterize the complex thermal behavior of cutting-edge cooling solutions, mainly Phase Change Material (PCM)-based cooling, liquid cooling, and thermoelectric cooling (TEC), as well as hybrid designs involving a combination of these. The proposed models are modular and they enable fast and accurate exploration of a large design space. Comparisons against multi-physics simulations and measurements on testbeds validate the accuracy of our models (resulting in less than 1C error on average) and demonstrate significant reductions in simulation time (up to four orders of magnitude shorter simulation times). This thesis then introduces temperature-aware optimization techniques to maximize energy efficiency of a given system as a whole (including computing and cooling energy). The proposed optimization techniques approach the temperature problem from various angles, tackling major sources of inefficiency. One important angle is to understand the application power and performance characteristics and to design management techniques to match them. For workloads that require short bursts of intense parallel computation, we propose using PCM-based cooling in cooperation with a novel Adaptive Sprinting technique. By tracking the PCM state and incorporating this information during runtime decisions, Adaptive Sprinting utilizes the PCM heat storage capability more efficiently, achieving 29\% performance improvement compared to existing sprinting policies. In addition to the application characteristics, high heterogeneity in on-chip heat distribution is an important factor affecting efficiency. Hot spots occur on different locations of the chip with varying intensities; thus, designing a uniform cooling solution to handle worst-case hot spots significantly reduces the cooling efficiency. The hybrid cooling techniques proposed as part of this thesis address this issue by combining the strengths of different cooling methods and localizing the cooling effort over hot spots. Specifically, the thesis introduces LoCool, a cooling system optimizer that minimizes cooling power under temperature constraints for hybrid-cooled systems using TECs and liquid cooling. Finally, the scope of this work is not limited to existing advanced cooling solutions, but it also extends to emerging technologies and their potential benefits and tradeoffs. One such technology is integrated flow cell array, where fuel cells are pumped through microchannels, providing both cooling and on-chip power generation. This thesis explores a broad range of design parameters including maximum chip temperature, leakage power, and generated power for flow cell arrays in order to maximize the benefits of integrating this technology with computing systems. Through thermal modeling and runtime management techniques, and by exploring the design space of emerging cooling solutions, this thesis provides significant improvements in processor energy efficiency.2018-07-09T00:00:00

Energy Neutral Design of Embedded Systems for Resource Constrained Monitoring Applications

Automatic monitoring of environments, resouces and human processes are crucial and foundamental tasks to improve people's quality of life and to safeguard the natural environment. Today, new technologies give us the possibility to shape a greener and safer future. The more specialized is the kind of monitoring we want to achieve, more tight are the constraints in terms of reliability, low energy and maintenance-free autonomy. The challenge in case of tight energy constraints is to find new techniques to save as much power as possible or to retrieve it from the very same environment where the system operates, towards the realization of energy neutral embedded monitoring systems. Energy efficiency and battery autonomy of such devices are still the major problem impacting reliability and penetration of such systems in risk-related activities of our daily life. Energy management must not be optimized to the detriment of the quality of monitoring and sensors can not be operated without supply. In this thesis, I present different embedded system designs to bridge this gap, both from the hardware and software sides, considering specific resource constrained scenarios as case studies that have been used to develop solutions with much broader validity. Results achieved demonstrate that energy neutrality in monitoring under resource constrained conditions can be obtained without compromising efficiency and reliability of the outcomes

A group-based wireless body sensors network using energy harvesting for soccer team monitoring

[EN] In team-based sports, it is difficult to monitor physical state of each athlete during the match. Wearable body sensors with wireless connections allow having low-power and low-size devices, that may use energy harvesting, but with low radio coverage area but the main issue comes from the mobility. This paper presents a wireless body sensors network for soccer team players' monitoring. Each player has a body sensor network that use energy harvesting and each player will be a node in the wireless sensor network. This proposal is based on the zone mobility of the players and their dynamism. It allows knowing the physical state of each player during the whole match. Having fast updates and larger connection times to the gateways, the information can be routed through players of both teams, thus a secure system has been added. Simulations show that the proposed system has very good performance in high mobility.This work has been partially supported by the Instituto de Telecomunicacoes, Next Generation Networks and Applications Group (NetGNA), Portugal, by Government of Russian Federation, Grant 074-U01, by National Funding from the FCT - Fundacao para a Ciencia e a Tecnologia through the PEst-OE/EEI/LA0008/2013 Project.Lloret, J.; García Pineda, M.; Catala Monzo, A.; Rodrigues, JJPC. (2016). A group-based wireless body sensors network using energy harvesting for soccer team monitoring. International Journal of Sensor Networks. 21(4):208-225. https://doi.org/10.1504/IJSNET.2016.079172S20822521

Design, analysis and implementation of voltage sensor for power-constrained systems

PhD ThesisThanks to an extensive effort by the global research community, the electronic technology has significantly matured over the last decade. This technology has enabled certain operations which humans could not otherwise easily perform. For instance, electronic systems can be used to perform sensing, monitoring and even control operations in environments such as outer space, underground, under the sea or even inside the human body. The main difficulty for electronics operating in these environments is access to a reliable and permanent source of energy. Using batteries as the immediate solution for this problem has helped to provide energy for limited periods of time; however, regular maintenance and replacement are required. Consequently, battery solutions fail wherever replacing them is not possible or operation for long periods is needed. For such cases, researchers have proposed harvesting ambient energy and converting it into an electrical form. An important issue with energy harvesters is that their operation and output power depend critically on the amount of energy they receive and because ambient energy often tends to be sporadic in nature, energy harvesters cannot produce stable or fixed levels of power all of the time. Therefore, electronic devices powered in this way must be capable of adapting their operation to the energy status of the harvester. To achieve this, information on the energy available for use is needed. This can be provided by a sensor capable of measuring voltage. However, stable and fixed voltage and time references are a prerequisite of most traditional voltage measurement devices, but these generally do not exist in energy harvesting environments. A further challenge is that such a sensor also needs to be powered by the energy harvester’s unstable voltage. In this thesis, the design of a reference-free voltage sensor, which can operate with a varying voltage source, is provided based on the capture of a portion of the total energy which is directly related to II the energy being sensed. This energy is then used to power a computation which quantifies captured energy over time, with the information directly generated as digital code. The sensor was fabricated in the 180 nm technology node and successfully tested by performing voltage measurements over the range 1.8 V to 0.8 V