Stochastic modelling and maintenance optimization of systems subject to deterioration

During the past decades to prevent catastrophic failure of the system, avoiding potential costs arising from the system downtime and optimize maintenance costs, there has been an interest in maintenance optimization problem for repairable systems subject to deterioration. Here to tackle the maintenance optimization problem two maintenance models for deteriorating repairable systems are proposed: optimal preventive maintenance scheduling model (decision model) and optimal maintenance-repair and inspection-scheduling model (intensity control model). In chapter 4 under both periodic and non-periodic inspection policy a novel approach to the determination of optimal repair and replacement decision rule subject to system parameters is presented. A renewal argument is used to derive expressions for the long-run average cost per unit time under theses two kinds· of inspection policy. The second part of the research (see chapter 5) considers maintenance scheduling problem of manufacturing systems whose production process (resulting output) is subject to system state. The latter means, resulting outputs (revenue) from system depends on the deterioration level of the manufacturing system: the good state of the system results in more efficiency of the system and more resulting output (revenue); the bad state of the system leads to system malfunction and less revenue. To optimize revenue from the manufacturing system, using optimal intensity control model, an optimum repair and inspection policy to balance the the amount of maintenance requires to increase system efficiency against the loss of revenue arising from the system malfunction is presented. Our approach rests on assumption that the transition rate from good (normal) state to bad (degraded) state is linear/non-linear. Deriving expression for long-run average cost per unit of time under both periodic and non-periodic inspection policy, applying the repair alert and virtual age process model, is the main advantage of the presented decision model to other maintenance models. In addition, using intensity control model, optimizing revenue from manufacturing systems subject to deterioration is a novel approach to maintenance scheduling of manufacturing systems whose production process is subject to the system state and represent an extension of the known maintenance models in which the maintenance process is restricted to inspections

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested

Production/maintenance cooperative scheduling using multi-agents and fuzzy logic

Within companies, production is directly concerned with the manufacturing schedule, but other services like sales, maintenance, purchasing or workforce management should also have an influence on this schedule. These services often have together a hierarchical relationship, i.e. the leading function (most of the time sales or production) generates constraints defining the framework within which the other functions have to satisfy their own objectives. We show how the multi-agent paradigm, often used in scheduling for its ability to distribute decision-making, can also provide a framework for making several functions cooperate in the schedule performance. Production and maintenance have been chosen as an example: having common resources (the machines), their activities are actually often conflicting. We show how to use a fuzzy logic in order to model the temporal degrees of freedom of the two functions, and show that this approach may allow one to obtain a schedule that provides a better compromise between the satisfaction of the respective objectives of the two functions

Production Scheduling Requirements to Smart Manufacturing

The production scheduling has attracted a lot of researchers for many years, however most of the approaches are not targeted to deal with real manufacturing environments, and those that are, are very particular for the case study. It is crucial to consider important features related with the factories, such as products and machines characteristics and unexpected disturbances, but also information such as when the parts arrive to the factory and when should be delivered. So, the purpose of this paper is to identify some important characteristics that have been considered independently in a lot of studies and that should be considered together to develop a generic scheduling framework to be used in a real manufacturing environment.authorsversionpublishe

Integration of production, maintenance and quality : Modelling and solution approaches

Dans cette thèse, nous analysons le problème de l'intégration de la planification de production et de la maintenance préventive, ainsi que l'élaboration du système de contrôle de la qualité. Premièrement, on considère un système de production composé d'une machine et de plusieurs produits dans un contexte incertain, dont les prix et le coût changent d'une période à l'autre. La machine se détériore avec le temps et sa probabilité de défaillance, ainsi que le risque de passage à un état hors contrôle augmentent. Le taux de défaillance dans un état dégradé est plus élevé et donc, des coûts liés à la qualité s’imposent. Lorsque la machine tombe en panne, une maintenance corrective ou une réparation minimale seront initiées pour la remettre en marche sans influer ses conditions ou le processus de détérioration. L'augmentation du nombre de défaillances de la machine se traduit par un temps d'arrêt supérieur et un taux de disponibilité inférieur. D'autre part, la réalisation des plans de production est fortement influencée par la disponibilité et la fiabilité de la machine. Les interactions entre la planification de la maintenance et celle de la production sont incorporées dans notre modèle mathématique. Dans la première étape, l'effet de maintenance sur la qualité est pris en compte. La maintenance préventive est considérée comme imparfaite. La condition de la machine est définie par l’âge actuel, et la machine dispose de plusieurs niveaux de maintenance avec des caractéristiques différentes (coûts, délais d'exécution et impacts sur les conditions du système). La détermination des niveaux de maintenance préventive optimaux conduit à un problème d’optimisation difficile. Un modèle de maximisation du profit est développé, dans lequel la vente des produits conformes et non conformes, les coûts de la production, les stocks tenus, la rupture de stock, la configuration de la machine, la maintenance préventive et corrective, le remplacement de la machine et le coût de la qualité sont considérés dans la fonction de l’objectif. De plus, un système composé de plusieurs machines est étudié. Dans cette extension, les nombres optimaux d’inspections est également considéré. La fonction de l’objectif consiste à minimiser le coût total qui est la somme des coûts liés à la maintenance, la production et la qualité. Ensuite, en tenant compte de la complexité des modèles préposés, nous développons des méthodes de résolution efficaces qui sont fondées sur la combinaison d'algorithmes génétiques avec des méthodes de recherches locales. On présente un algorithme mimétique qui emploi l’algorithme Nelder-Mead, avec un logiciel d'optimisation pour déterminer les valeurs exactes de plusieurs variables de décisions à chaque évaluation. La méthode de résolution proposée est comparée, en termes de temps d’exécution et de qualités des solutions, avec plusieurs méthodes Métaheuristiques. Mots-clés : Planification de la production, Maintenance préventive imparfaite, Inspection, Qualité, Modèles intégrés, MétaheuristiquesIn this thesis, we study the integrated planning of production, maintenance, and quality in multi-product, multi-period imperfect systems. First, we consider a production system composed of one machine and several products in a time-varying context. The machine deteriorates with time and so, the probability of machine failure, or the risk of a shift to an out-of-control state, increases. The defective rate in the shifted state is higher and so, quality related costs will be imposed. When the machine fails, a corrective maintenance or a minimal repair will be initiated to bring the machine in operation without influencing on its conditions or on the deterioration process. Increasing the expected number of machine failures results in a higher downtime and a lower availability rate. On the other hand, realization of the production plans is significantly influenced by the machine availability and reliability. The interactions between maintenance scheduling and production planning are incorporated in the mathematical model. In the first step, the impact of maintenance on the expected quality level is addressed. The maintenance is also imperfect and the machine conditions after maintenance can be anywhere between as-good-as-new and as-bad-as-old situations. Machine conditions are stated by its effective age, and the machine has several maintenance levels with different costs, execution times, and impacts on the system conditions. High level maintenances on the one hand have greater influences on the improvement of the system state and on the other hand, they occupy more the available production time. The optimal determination of such preventive maintenance levels to be performed at each maintenance intrusion is a challenging problem. A profit maximization model is developed, where the sale of conforming and non-conforming products, costs of production, inventory holding, backorder, setup, preventive and corrective maintenance, machine replacement, and the quality cost are addressed in the objective function. Then, a system with multiple machines is taken into account. In this extension, the number of quality inspections is involved in the joint model. The objective function minimizes the total cost which is the sum of maintenance, production and quality costs. In order to reduce the gap between the theory and the application of joint models, and taking into account the complexity of the integrated problems, we have developed an efficient solution method that is based on the combination of genetic algorithms with local search and problem specific methods. The proposed memetic algorithm employs Nelder-Mead algorithm along with an optimization package for exact determination of the values of several decision variables in each chromosome evolution. The method extracts not only the positive knowledge in good solutions, but also the negative knowledge in poor individuals to determine the algorithm transitions. The method is compared in terms of the solution time and quality to several heuristic methods. Keywords : Multi-period production planning, Imperfect preventive maintenance, Inspection, Quality, Integrated model, Metaheuristic

Microalgae production and maintenance optimization via mixed-integer model predictive control

This paper studies the joint production and maintenance scheduling in microalgae manufacturing systems comprised of multiple machines, which are subject to coupled production demand agreements and operational maintenance constraints. Namely, there are some microalgae production demands to be met over a given horizon, and the maintenance of each microalgae manufacturing unit must be done before a given deadline. Moreover, the number of units whose maintenance can be done simultaneously over the same day is limited, and the units that undergo maintenance cannot contribute to microalgae production during their maintenance day. To solve the considered problem, we design a mixed-integer nonlinear model predictive controller, which is implemented in two optimization stages. The former regards a mixed-integer model predictive control problem, while the latter considers a nonlinear model predictive control problem. The proposed approach allows us to decouple the mixed-integer and nonlinear parts of the whole problem, and thus provides more flexibility on the optimization solvers that can be employed. In addition, the first stage also evaluates the attainability of the demand agreements, and provides a mechanism to minimally adjust such constraints so that their satisfaction can be guaranteed at the second stage. The overall model predictive control approach is based on experimental data collected at VAXA Technologies Ltd., and the effectiveness of the proposed method is validated through numerical simulations including multiple manufacturing units and uncertainties.Juan Martinez-Piazuelo gratefully acknowledges the Universitat Politècnica de Catalunya and Banco Santander for the financial support of his predoctoral grant FPI-UPC. In addition, the authors would like to thank VAXA Technologies Ltd. as well as the project PID2020-115905RB-C21 (L-BEST) funded by MCIN/ AEI /10.13039/501100011033 for supporting this research.Peer ReviewedPostprint (published version