178 research outputs found
Long Term Evolution-Advanced and Future Machine-to-Machine Communication
Long Term Evolution (LTE) has adopted Orthogonal Frequency Division Multiple Access (OFDMA) and Single Carrier Frequency Division Multiple Access (SC-FDMA) as the downlink and uplink transmission schemes respectively. Quality of Service (QoS) provisioning is one of the primary objectives of wireless network operators. In LTE-Advanced (LTE-A), several additional new features such as Carrier Aggregation (CA) and Relay Nodes (RNs) have been introduced by the 3rd Generation Partnership Project (3GPP). These features have been designed to deal with the ever increasing demands for higher data rates and spectral efficiency. The RN is a low power and low cost device designed for extending the coverage and enhancing spectral efficiency, especially at the cell edge. Wireless networks are facing a new challenge emerging on the horizon, the expected surge of the Machine-to-Machine (M2M) traffic in cellular and mobile networks. The costs and sizes of the M2M devices with integrated sensors, network interfaces and enhanced power capabilities have decreased significantly in recent years. Therefore, it is anticipated that M2M devices might outnumber conventional mobile devices in the near future. 3GPP standards like LTE-A have primarily been developed for broadband data services with mobility support. However, M2M applications are mostly based on narrowband traffic. These standards may not achieve overall spectrum and cost efficiency if they are utilized for serving the M2M applications. The main goal of this thesis is to take the advantage of the low cost, low power and small size of RNs for integrating M2M traffic into LTE-A networks. A new RN design is presented for aggregating and multiplexing M2M traffic at the RN before transmission over the air interface (Un interface) to the base station called eNodeB. The data packets of the M2M devices are sent to the RN over the Uu interface. Packets from different devices are aggregated at the Packet Data Convergence Protocol (PDCP) layer of the Donor eNodeB (DeNB) into a single large IP packet instead of several small IP packets. Therefore, the amount of overhead data can be significantly reduced. The proposed concept has been developed in the LTE-A network simulator to illustrate the benefits and advantages of the M2M traffic aggregation and multiplexing at the RN. The potential gains of RNs such as coverage enhancement, multiplexing gain, end-to-end delay performance etc. are illustrated with help of simulation results. The results indicate that the proposed concept improves the performance of the LTE-A network with M2M traffic. The adverse impact of M2M traffic on regular LTE-A traffic such as voice and file transfer is minimized. Furthermore, the cell edge throughput and QoS performance are enhanced. Moreover, the results are validated with the help of an analytical model
Context-aware Cluster Based Device-to-Device Communication to Serve Machine Type Communications
Billions of Machine Type Communication (MTC) devices are foreseen to be
deployed in next ten years and therefore potentially open a new market for next
generation wireless network. However, MTC applications have different
characteristics and requirements compared with the services provided by legacy
cellular networks. For instance, an MTC device sporadically requires to
transmit a small data packet containing information generated by sensors. At
the same time, due to the massive deployment of MTC devices, it is inefficient
to charge their batteries manually and thus a long battery life is required for
MTC devices. In this sense, legacy networks designed to serve human-driven
traffics in real time can not support MTC efficiently. In order to improve the
availability and battery life of MTC devices, context-aware device-to-device
(D2D) communication is exploited in this paper. By applying D2D communication,
some MTC users can serve as relays for other MTC users who experience bad
channel conditions. Moreover, signaling schemes are also designed to enable the
collection of context information and support the proposed D2D communication
scheme. Last but not least, a system level simulator is implemented to evaluate
the system performance of the proposed technologies and a large performance
gain is shown by the numerical results
Optimization and Applications of Modern Wireless Networks and Symmetry
Due to the future demands of wireless communications, this book focuses on channel coding, multi-access, network protocol, and the related techniques for IoT/5G. Channel coding is widely used to enhance reliability and spectral efficiency. In particular, low-density parity check (LDPC) codes and polar codes are optimized for next wireless standard. Moreover, advanced network protocol is developed to improve wireless throughput. This invokes a great deal of attention on modern communications
6G Enabled Smart Infrastructure for Sustainable Society: Opportunities, Challenges, and Research Roadmap
The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory–extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key take-away lessons for future research exploration in 6G wireless communicatio
5G NR-V2X: Towards Connected and Cooperative Autonomous Driving
This paper is concerned with the key features and fundamental technology
components for 5G New Radio (NR) for genuine realization of connected and
cooperative autonomous driving. We discuss the major functionalities of
physical layer, Sidelink features and its resource allocation, architecture
flexibility, security and privacy mechanisms, and precise positioning
techniques with an evolution path from existing cellular vehicle-to-everything
(V2X) technology towards NR-V2X. Moreover, we envisage and highlight the
potential of machine learning for further enhancement of various NR-V2X
services. Lastly, we show how 5G NR can be configured to support advanced V2X
use cases in autonomous driving
Building upon NB-IoT networks : a roadmap towards 5G new radio networks
Narrowband Internet of Things (NB-IoT) is a type of low-power wide-area (LPWA) technology
standardized by the 3rd-Generation Partnership Project (3GPP) and based on long-term evolution (LTE)
functionalities. NB-IoT has attracted significant interest from the research community due to its support for
massive machine-type communication (mMTC) and various IoT use cases that have stringent specifications
in terms of connectivity, energy efficiency, reachability, reliability, and latency. However, as the capacity
requirements for different IoT use cases continue to grow, the various functionalities of the LTE evolved
packet core (EPC) system may become overladen and inevitably suboptimal. Several research efforts are
ongoing to meet these challenges; consequently, we present an overview of these efforts, mainly focusing on
the Open System Interconnection (OSI) layer of the NB-IoT framework. We present an optimized architecture of the LTE EPC functionalities, as well as further discussion about the 3GPP NB-IoT standardization
and its releases. Furthermore, the possible 5G architectural design for NB-IoT integration, the enabling
technologies required for 5G NB-IoT, the 5G NR coexistence with NB-IoT, and the potential architectural
deployment schemes of NB-IoT with cellular networks are introduced. In this article, a description of
cloud-assisted relay with backscatter communication, a comprehensive review of the technical performance
properties and channel communication characteristics from the perspective of the physical (PHY) and
medium-access control (MAC) layer of NB-IoT, with a focus on 5G, are presented. The different limitations
associated with simulating these systems are also discussed. The enabling market for NB-IoT, the benefits
for a few use cases, and possible critical challenges related to their deployment are also included. Finally,
present challenges and open research directions on the PHY and MAC properties, as well as the strengths,
weaknesses, opportunities, and threats (SWOT) analysis of NB-IoT, are presented to foster the prospective
research activities.http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=6287639pm2021Electrical, Electronic and Computer Engineerin
Towards reliable communication in LTE-A connected heterogeneous machine to machine network
Machine to machine (M2M) communication is an emerging technology that enables heterogeneous devices to communicate with each other without human intervention and thus forming so-called Internet of Things (IoTs). Wireless cellular networks (WCNs) play a significant role in the successful deployment of M2M communication. Specially the ongoing massive deployment of long term evolution advanced (LTE-A) makes it possible to establish machine type communication (MTC) in most urban and remote areas, and by using LTE-A backhaul network, a seamless network communication is being established between MTC-devices and-applications. However, the extensive network coverage does not ensure a successful implementation of M2M communication in the LTE-A, and therefore there are still some challenges.
Energy efficient reliable transmission is perhaps the most compelling demand for various M2M applications. Among the factors affecting reliability of M2M communication are the high endto-end delay and high bit error rate. The objective of the thesis is to provide reliable M2M communication in LTE-A network. In this aim, to alleviate the signalling congestion on air interface and efficient data aggregation we consider a cluster based architecture where the MTC devices are grouped into number of clusters and traffics are forwarded through some special nodes called cluster heads (CHs) to the base station (BS) using single or multi-hop transmissions. In many deployment scenarios, some machines are allowed to move and change their location in the deployment area with very low mobility. In practice, the performance of data transmission often degrades with the increase of distance between neighboring CHs. CH needs to be reselected in such cases. However, frequent re-selection of CHs results in counter effect on routing and reconfiguration of resource allocation associated with CH-dependent protocols. In addition, the link quality between a CH-CH and CH-BS are very often affected by various dynamic environmental factors such as heat and humidity, obstacles and RF interferences. Since CH aggregates the traffic from all cluster members, failure of the CH means that the full cluster will fail. Many solutions have been proposed to combat with error prone wireless channel such as automatic repeat request (ARQ) and multipath routing. Though the above mentioned techniques improve the communication reliability but intervene the communication efficiency. In the former scheme, the transmitter retransmits the whole packet even though the part of the packet has been received correctly and in the later one, the receiver may receive the same information from multiple paths; thus both techniques are bandwidth and energy inefficient. In addition, with retransmission, overall end to end delay may exceed the maximum allowable delay budget.
Based on the aforementioned observations, we identify CH-to-CH channel is one of the bottlenecks to provide reliable communication in cluster based multihop M2M network and present a full solution to support fountain coded cooperative communications. Our solution covers many aspects from relay selection to cooperative formation to meet the user’s QoS requirements. In the first part of the thesis, we first design a rateless-coded-incremental-relay selection (RCIRS) algorithm based on greedy techniques to guarantee the required data rate with a minimum cost. After that, we develop fountain coded cooperative communication protocols to facilitate the data transmission between two neighbor CHs. In the second part, we propose joint network and fountain coding schemes for reliable communication. Through coupling channel coding and network coding simultaneously in the physical layer, joint network and fountain coding schemes efficiently exploit the redundancy of both codes and effectively combat the detrimental effect of fading conditions in wireless channels. In the proposed scheme, after correctly decoding the information from different sources, a relay node applies network and fountain coding on the received signals and then transmits to the destination in a single transmission. Therefore, the proposed schemes exploit the diversity and coding gain to improve the system performance. In the third part, we focus on the reliable uplink transmission between CHs and BS where CHs transmit to BS directly or with the help of the LTE-A relay nodes (RN). We investigate both type-I and type-II enhanced LTE-A networks and propose a set of joint network and fountain coding schemes to enhance the link robustness.
Finally, the proposed solutions are evaluated through extensive numerical simulations and the numerical results are presented to provide a comparison with the related works found in the literature
A Systematic Approach for Cyber Security in Vehicular Networks
Vehicular Networks (VANET) are the largest real-life paradigm of ad hoc networks which aim to ensure road safety and enhance drivers’ comfort. In VANET, the vehicles communicate or collaborate with each other and with adjacent infrastructure by exchanging significant messages, such as road accident warnings, steep-curve ahead warnings or traffic jam warnings. However, this communication and other assets involved are subject to major threats and provide numerous opportunities for attackers to launch several attacks and compromise security and privacy of vehicular users. This paper reviews the cyber security in VANET and proposes an asset-based approach for VANET security. Firstly, it identifies relevant assets in VANET. Secondly, it provides a detailed taxonomy of vulnerabilities and threats on these assets, and, lastly, it classifies the possible attacks in VANET and critically evaluates them
- …