Consultant-2: pre- and post processing of machine learning applications.

The knowledge acquisition bottleneck in the development of large knowledge-based applications has not yet been resolved. One approach which has been advocated is the systematic use of Machine Learning (ML) techniques. However, ML technology poses difficulties to domain experts and knowledge engineers who are not familiar with it. This paper discusses Consultant-2, a system which makes a first step towards providing system support for a pre- and post-processing methodology where a cyclic process of experiments with an ML tool, its data, data description language and parameters attempts to optimize learning performance. Consultant-2 has been developed to support the use of Machine Learning Toolbox (MLT), an integrated architecture of 10 ML tools, and has evolved from a series of earlier systems. Consultant-0 and Consultant-1 had knowledge only about how to choose an ML algorithm based on the nature of the domain data. Consultant-2 is the most sophisticated. It, additionally, has knowledge about how ML experts and domain experts pre-process domain data before a run with the ML algorithm, and how they further manipulate the data and reset parameters after a run of the selected ML algorithm, to achieve a more acceptable result. How these several KBs were acquired and encoded is described. In fact, this knowledge has been acquired by interacting both with the ML algorithm developers and with domain experts who had been using the MLT toolbox on real-world tasks. A major aim of the MLT project was to enable a domain expert to use the toolbox directly; i.e. without necessarily having to involve either a ML specialist or a knowledge engineer. Consultant's principal goal was to provide specific advice to ease this process

Neural networks for small scale ORC optimization

This study concerns a thermodynamic and technical optimization of a small scale Organic Rankine Cycle system for waste heat recovery applications. An Artificial Neural Network (ANN) has been used to develop a thermodynamic model to be used for the maximization of the production of power while keeping the size of the heat exchangers and hence the cost of the plant at its minimum. R1234yf has been selected as the working fluid. The results show that the use of ANN is promising in solving complex nonlinear optimization problems that arise in the field of thermodynamics

Damage Detection in Metallic Beams from Dynamic Strain Measurements under Different Load Cases by Using Automatic Clustering and Pattern Recognition Techniques

International audienceIn general, the change in the local strain field or global stiffness caused by damage in a structure is very small and the strain field tends to homogenize very quickly in the field close to the defect. Moreover, other environmental effects can fade the slight changes in the strain field. Only by comparing the response of the structure at several points some information about damage may be unveiled. By means of pattern recognition techniques based on the strain field, this task can be achieved. This is the basis of the strain measurements data-driven models. The main limitation of the strain field pattern recognition techniques lies in the susceptibility of the strain field to change depending on the load conditions. In the case of dynamic loads, this may reflect even a greater limitation. Robust automated techniques are required to manage these limitations. In first instance, automatic clustering techniques are needed so that data can be classified according to the load conditions and secondly, a dimensional reduction technique is needed in order to obtain patterns that often underlie from data. Within the context of this paper, a combination of Local Density-based Simultaneous Two-Level (DS2L-SOM) Clustering based on Self-Organizing Maps (SOM) and Principal Components Analysis (PCA) is proposed in order to firstly, classify load conditions and secondly, perform strain field pattern recognition. The clustering technique is the basis for an Optimal Baseline Selection. An experimental validation of the technique is discussed in this paper, comparing damages of different sizes and positions in an aluminum beam, under a set of combined loads under dynamic conditions. Strains were measured at several points by using Fiber Bragg Gratings

Determinants of Long-term Economic Development: An Empirical Cross-country Study Involving Rough Sets Theory and Rule Induction

Empirical findings on determinants of long-term economic growth are numerous, sometimes inconsistent, highly exciting and still incomplete. The empirical analysis was almost exclusively carried out by standard econometrics. This study compares results gained by cross-country regressions as reported in the literature with those gained by the rough sets theory and rule induction. The main advantages of using rough sets are being able to classify classes and to discretize. Thus, we do not have to deal with distributional, independence, (log-)linearity, and many other assumptions, but can keep the data as they are. The main difference between regression results and rough sets is that most education and human capital indicators can be labeled as robust attributes. In addition, we find that political indicators enter in a non-linear fashion with respect to growth.Economic growth, Rough sets, Rule induction