Advanced Mobile Robotics: Volume 3

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective

A Systematic Survey of Control Techniques and Applications: From Autonomous Vehicles to Connected and Automated Vehicles

Vehicle control is one of the most critical challenges in autonomous vehicles (AVs) and connected and automated vehicles (CAVs), and it is paramount in vehicle safety, passenger comfort, transportation efficiency, and energy saving. This survey attempts to provide a comprehensive and thorough overview of the current state of vehicle control technology, focusing on the evolution from vehicle state estimation and trajectory tracking control in AVs at the microscopic level to collaborative control in CAVs at the macroscopic level. First, this review starts with vehicle key state estimation, specifically vehicle sideslip angle, which is the most pivotal state for vehicle trajectory control, to discuss representative approaches. Then, we present symbolic vehicle trajectory tracking control approaches for AVs. On top of that, we further review the collaborative control frameworks for CAVs and corresponding applications. Finally, this survey concludes with a discussion of future research directions and the challenges. This survey aims to provide a contextualized and in-depth look at state of the art in vehicle control for AVs and CAVs, identifying critical areas of focus and pointing out the potential areas for further exploration

Tracking Control of Autonomous Vehicles

This thesis intends to design new tracking schemes to enhance the performance and stability of general autonomous vehicles (AVs). Three main types of controllers used for tracking control are investigated. The geometric controller cannot meet high tracking requirements, and control parameters significantly affect its performance. Therefore, an observer-based nonlinear control combined with a particle swarm optimization (PSO) algorithm is developed for low-speed vehicles to track the pre-determined trajectory accurately. A control law featured with self-tuning gains is designed using the backstepping control technique, for which global asymptotic stability is validated. The PSO evaluates tracking performance through the proposed fitness function and generates optimized tuning parameters with fewer iterations, reducing tuning efforts. Velocity and steering tracking could also be rapidly realized by modifying the error weights of the performance evaluation criterion. Based on the proposed yaw error observer (YEO), the problem of the angle measurements being temporarily inaccurate or unavailable is tackled effectively with the given information. Further, existing methods can suffer from complex control algorithms and a lack of tracking stability at high speed. The vehicle's motion is decoupled by considering the Frenet frame. A lateral control law based on the linear-quadratic-regulator (LQR) imposes the tracking errors to converge to zero stably and quickly, providing the optimal solution in real-time due to adaptive gains. Regarding the steady-state errors, they are eliminated through the correction of the feedforward term. Besides, the designed double proportional-integral-derivative (PID) controller realizes not only the longitudinal control but also the velocity tracking

Cooperative Control Reconfiguration in Networked Multi-Agent Systems

Development of a network of autonomous cooperating vehicles has attracted significant attention during the past few years due to its broad range of applications in areas such as autonomous underwater vehicles for exploring deep sea oceans, satellite formations for space missions, and mobile robots in industrial sites where human involvement is impossible or restricted, to name a few. Motivated by the stringent specifications and requirements for depth, speed, position or attitude of the team and the possibility of having unexpected actuators and sensors faults in missions for these vehicles have led to the proposed research in this thesis on cooperative fault-tolerant control design of autonomous networked vehicles. First, a multi-agent system under a fixed and undirected network topology and subject to actuator faults is studied. A reconfigurable control law is proposed and the so-called distributed Hamilton-Jacobi-Bellman equations for the faulty agents are derived. Then, the reconfigured controller gains are designed by solving these equations subject to the faulty agent dynamics as well as the network structural constraints to ensure that the agents can reach a consensus even in presence of a fault while simultaneously the team performance index is minimized. Next, a multi-agent network subject to simultaneous as well as subsequent actuator faults and under directed fixed topology and subject to bounded energy disturbances is considered. An H∞ performance fault recovery control strategy is proposed that guarantees: the state consensus errors remain bounded, the output of the faulty system behaves exactly the same as that of the healthy system, and the specified H∞ performance bound is guaranteed to be minimized. Towards this end, the reconfigured control law gains are selected first by employing a geometric control approach where a set of controllers guarantees that the output of the faulty agent imitates that of the healthy agent and the consensus achievement objectives are satisfied. Then, the remaining degrees of freedom in the selection of the control law gains are used to minimize the bound on a specified H∞ performance index. Then, control reconfiguration problem in a team subject to directed switching topology networks as well as actuator faults and their severity estimation uncertainties is considered. The consensus achievement of the faulty network is transformed into two stability problems, in which one can be solved offline while the other should be solved online and by utilizing information that each agent has received from the fault detection and identification module. Using quadratic and convex hull Lyapunov functions the control gains are designed and selected such that the team consensus achievement is guaranteed while the upper bound of the team cost performance index is minimized. Finally, a team of non-identical agents subject to actuator faults is considered. A distributed output feedback control strategy is proposed which guarantees that agents outputs’ follow the outputs of the exo-system and the agents states remains stable even when agents are subject to different actuator faults

Deep Learning-Based, Passive Fault Tolerant Control Facilitated by a Taxonomy of Cyber-Attack Effects

In the interest of improving the resilience of cyber-physical control systems to better operate in the presence of various cyber-attacks and/or faults, this dissertation presents a novel controller design based on deep-learning networks. This research lays out a controller design that does not rely on fault or cyber-attack detection. Being passive, the controller’s routine operating process is to take in data from the various components of the physical system, holistically assess the state of the physical system using deep-learning networks and decide the subsequent round of commands from the controller. This use of deep-learning methods in passive fault tolerant control (FTC) is unique in the research literature. The proposed controller is applied to both linear and nonlinear systems. Additionally, the application and testing are accomplished with both actuators and sensors being affected by attacks and /or faults

Robust model-based fault estimation and fault-tolerant control : towards an integration

To maintain robustly acceptable system performance, fault estimation (FE) is adopted to reconstruct fault signals and a fault-tolerant control (FTC) controller is employed to compensate for the fault effects. The inevitably existing system and estimation uncertainties result in the so-called bi-directional robustness interactions defined in this work between the FE and FTC functions, which gives rise to an important and challenging yet open integrated FE/FTC design problem concerned in this thesis. An example of fault-tolerant wind turbine pitch control is provided as a practical motivation for integrated FE/FTC design.To achieve the integrated FE/FTC design for linear systems, two strategies are proposed. A H∞ optimization based approach is first proposed for linear systems with differentiable matched faults, using augmented state unknown input observer FE and adaptive sliding mode FTC. The integrated design is converted into an observer-based robust control problem solved via a single-step linear matrix inequality formulation.With the purpose of an integrated design with more freedom and also applicable for a range of general fault scenarios, a decoupling approach is further proposed. This approach can estimate and compensate unmatched non-differentiable faults and perturbations by combined adaptive sliding mode augmented state unknown input observer and backstepping FTC controller. The observer structure renders a recovery of the Separation Principle and allows great freedom for the FE/FTC designs.Integrated FE/FTC design strategies are also developed for Takagi-Sugeno fuzzy modelling nonlinear systems, Lipschitz nonlinear systems, and large-scale interconnected systems, based on extensions of the H∞ optimization approach for linear systems.Tutorial examples are used to illustrate the design strategies for each approach. Physical systems, a 3-DOF (degree-of-freedom) helicopter and a 3-machine power system, are used to provide further evaluation of the proposed integrated FE/FTC strategies. Future research on this subject is also outlined