Advanced Signal Processing for Pulse-Amplitude Modulation Optical Transmission Systems

[ES] Los sistemas de transmisión óptica no-coherente se emplean actualmente en las redes ópticas de corto alcance (< 80 km), como son las redes de ámbito metropolitano. La implementación más común en el estado del arte se basa en sistemas que emplean multiplexación por división en longitud de onda (WDM, wavelength division multiplexing) de cuatro longitudes de onda (¿) proporcionando un régimen binario de 100 Gbps (4¿×25 Gbps). En los últimos años, los sistemas de transmisión ópticos no-coherentes están evolucionando desde 100 Gbps a 400 Gbps (4¿×100 Gbps). Dado que este mercado comprende un gran número de sistemas, el coste es un parámetro importante que debe ser lo más bajo posible. El objetivo de esta tesis es investigar distintos aspectos del procesado de señal en general y, específicamente, investigar nuevas técnicas de procesado digital de señal (DSP, digital signal processing) que puedan ser utilizadas en sistemas de transmisión óptica no-coherentes empleando la modulación por amplitud de pulsos (PAM, pulse-amplitude modulation). Para que una técnica DSP sea interesante en el contexto de una red óptica WDM no-coherente, esta debe mitigar de manera efectiva al menos una de las tres limitaciones principales que afectan a estos sistemas: limitaciones de ancho de banda, limitaciones por dispersión cromática (CD), y el ruido. En esta tesis se proponen y examinan una serie de algoritmos cuyo su rendimiento es analizado mediante simulación y experimentalmente en laboratorio: - Feed-forward equalizer (FFE): este es el esquema de ecualización más común que se emplea principalmente en las transmisiones ópticas no-coherentes de alto régimen binario. Puede compensar grandes limitaciones en el ancho de banda. - Estimación de la secuencia de máxima verosimilitud (MLSE): el MLSE es un detector óptimo y, por lo tanto, proporciona las mejores prestaciones en detección cuando se abordan las limitaciones por CD y de ancho de banda. - Conformación geométrica de la constelación: en los esquemas de modulación de intensidad óptica multinivel, la distancia entre los niveles de amplitud puede ajustarse adecuadamente (de manera que no son equidistantes) a fin de aumentar la tolerancia de la señal frente al ruido. - Conformación probabilística: técnica diseñada específicamente para esquemas de modulación multinivel. Esta técnica ajusta la probabilidad de cada nivel de amplitud de modo que se incrementa la tolerancia al ruido óptico. - Señalización de respuesta parcial (PRS, partial signaling response): este es un enfoque basado en DSP donde una interferencia entre símbolos (ISI, inter-symbol interference) controlada es introducida intencionalmente de tal manera que la señal resultante requiere menos ancho de banda. La técnica PRS puede adaptarse para combatir también el efecto de CD. - Pre-énfasis digital (DPE, digital pre-emphasis): esta técnica consiste en aplicar el inverso de la función de transferencia del sistema a la señal en el transmisor, lo que reduce el impacto de las limitaciones de ancho de banda en el receptor. - Modulación con codificación Trellis (TCM, Trellis-coded modulation): esquema de modulación que combina elementos de corrección de errores (FEC, forward error correction) con técnicas de partición en conjuntos y modulación multidimensional para generar una señal más resistente al ruido. - Modulación multidimensional por partición en conjuntos: muy similar a TCM, pero sin ningún elemento FEC. Tiene menos ganancias que TCM en términos de tolerancia al ruido, pero no es tan sensible al ISI. Utilizando estas técnicas, esta tesis demuestra que es posible lograr una transmisión óptica con régimen binario de 100 Gbps/¿ empleando componentes de bajo coste. En esta tesis también demuestra regímenes binarios de más de 200 Gbps, lo que indica que la transmisión óptica no-coherente con modulación PAM puede ser una solución viable y eficiente en coste[CA] Actualment, s'utilitzen sistemes òptics no coherents en xarxes òptiques de curt abast ( < 80 km), com són les xarxes d'àmbit metropolità. La implementació més comuna que podem trobar en l'estat de l'art es correspon amb sistemes emplenant multiplexació per divisió en longitud d'ona (WDM, wavelength division multiplexing) de quatre longituds d'ona (¿) proporcionant un règim binari de 100 Gbps (4¿×25 Gbps). En els últims anys, els sistemes de transmissió òptica no-coherents han evolucionat des de 100 Gbps cap a 400 Gbps (100 Gbps/¿). Atès que el mercat de sistemes de curt abast compren un gran volum de dispositius òptics instal·lats, el cost unitari és molt important i ha de ser el més baix possible. L'objectiu d'aquesta tesi és analitzar aspectes del processament de senyal en general i, específicament, investigar noves tècniques de processament digital de senyal (DSP, digital signal processing) que puguen ser utilitzades en sistemes de transmissió òptica no-coherent que utilitzen la modulació per amplitud d'impulsos (PAM, pulse-amplitude modulation). Per tal que una tècnica DSP es considere interessant per a una xarxa òptica WDM no-coherent, aquesta ha de mitigar efectivament almenys una de les tres principals limitacions que afecten aquests sistemes: limitacions d'ample de banda, limitacions per dispersió cromàtica (CD), i el soroll. En aquesta tesi s'examinen una sèrie d'algoritmes, el seu rendiment s'analitza per simulació i experimentalment en laboratori: - Feed-forward equalizer (FFE): aquest és l'esquema d'equalització més comú i s'utilitza bàsicament en les transmissions òptiques no coherents d'alt règim binari. Pot compensar grans quantitats de limitacions d'ample de banda. - Estimació de la seqüència de probabilitat màxima (MLSE): el MLSE és un detector òptim i, per tant, proporciona el millor rendiment quan es tracta de limitacions d'ample de banda i de CD. - Conformació geomètrica de la constel·lació: en esquemes de modulació òptica d'intensitat multinivell es pot ajustar la distància entre els nivells d'amplitud (de manera que ja no són equidistants) per augmentar la tolerància del senyal al soroll. - Conformació probabilística: una tècnica dissenyada específicament per als esquemes de modulació multinivell; ajusta la probabilitat de cada nivell d'amplitud de manera que augmenta la tolerància al soroll òptic. - Senyalització de resposta parcial (PRS, partial signaling response): és un enfocament basat en DSP on la interferència entre símbols (ISI, inter-symbol interference) controlada s'introdueix intencionalment de manera que el senyal resultant requereix menys ample de banda. La tècnica PRS es pot adaptar per combatre els efectes del CD. - Pre-èmfasi digital (DPE, digital pre-emphasis): aquesta tècnica consisteix a aplicar la inversió de la funció de transferència del sistema a la senyal en el transmissor de manera que es redueix l'impacte de les limitacions d'ample de banda en la senyal en el receptor. - Modulació amb codificació Trellis (TCM, Trellis-coded modulation): esquema de modulació que combina els elements de correcció d'errors avançats (FEC, forward error correction) amb tècniques de partionament de conjunts i modulació multidimensional per generar un senyal més resistent al soroll. - Modulació multidimensional per partició en conjuntes: molt similar a TCM però sense elements FEC. Té guanys menors que TCM en termes de tolerància al soroll, però no és tan sensible a l'ISI. Mitjançant l'ús d'aquestes tècniques, aquesta tesi demostra que és possible aconseguir una transmissió òptica amb un règim binari de 100 Gbps/¿ utilitzant components de baix cost. Esta tesi també demostra règims binaris de més de 200 Gbps, el que indica que la tecnologia no-coherent amb modulació PAM és una solució viable i eficient en cost per a una nova generació de sistemes transceptors òptics WDM funcionant a 800 Gbps (4¿×200 G[EN] Non-coherent optical transmission systems are currently employed in short-reach optical networks (reach shorter than 80 km), like metro networks. The most common implementation in the state-of-the-art is the four wavelength (¿) 100 Gbps (4¿×25 Gbps) wavelength division multiplexing (WDM) transceiver. In recent years non-coherent optical transmissions are evolving from 100 Gbps to 400 Gbps (4¿×100 Gbps). Since in the short-reach market the volume of optical devices being deployed is very large, the cost-per-unit of the devices is very important, and it should be as low as possible. The goal of this thesis is to investigate some general signal processing aspects and, specifically, digital signal processing (DSP) techniques required in non-coherent pulse-amplitude modulation (PAM) optical transmission, and also to investigate novel algorithms which could be applied to this application scenario. In order for a DSP technique to be considered an interesting solution for non-coherent WDM optical networks it has to effectively mitigate at least one of the three main impairments affecting such systems: bandwidth limitations, chromatic dispersion (CD) and noise (in optical or electrical domain). A series of algorithms are proposed and examined in this thesis, and their performance is analyzed by simulation and also experimentally in the laboratory: - Feed-forward equalization (FFE): this is the most common equalizer and it is basically employed in every high-speed non-coherent optical transmission. It can compensate high bandwidth limitations. - Maximum likelihood sequence estimation (MLSE): the MLSE is the optimum detector and thus provides the best performance when it comes to dealing with CD and bandwidth limitations. - Geometrical constellation shaping: in multilevel optical intensity modulation schemes the distance between amplitude levels can be adjusted (such that they are no longer equidistant) in order to increase the signal's tolerance to noise. - Probabilistic shaping: another technique designed specifically for multilevel modulation schemes; it adjusts the probability of each amplitude level such that the tolerance to optical noise is increased. - Partial response signaling (PRS): this is a DSP-based approach where a controlled inter-symbol interference (ISI) is intentionally introduced in such a way that the resulting signal requires less bandwidth. PRS can be customized to also mitigate CD impairment, effectively increasing transmission distances up to three times. - Digital pre-emphasis (DPE): this technique consists in applying the inverse of the transfer function of the system to the signal at the transmitter side which reduces the impact of bandwidth limitations on the signal at the receiver side. - Trellis-coded modulation (TCM): a modulation scheme that combines forward error correction (FEC) elements with set-partitioning techniques and multidimensional modulation to generate a signal that is more resistant to noise. - Multidimensional set-partitioned modulation: very similar with TCM but without any FEC elements. It has lower gains than TCM in terms of noise tolerance but is not so sensitive to ISI. By using the techniques enumerated above, this thesis demonstrates that is possible to achieve 100 Gbps/¿ optical transmission bitrate employing cost-effective components. Even more, bitrates higher than 200 Gbps are also demonstrated, indicating that non-coherent PAM is a viable cost-effective solution for next-generation 800 Gbps (4¿×200 Gbps) WDM transceivers.Prodaniuc, C. (2019). Advanced Signal Processing for Pulse-Amplitude Modulation Optical Transmission Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/117315TESI

Adaptive equalisation for fading digital communication channels

This thesis considers the design of new adaptive equalisers for fading digital communication channels. The role of equalisation is discussed in the context of the functions of a digital radio communication system and both conventional and more recent novel equaliser designs are described. The application of recurrent neural networks to the problem of equalisation is developed from a theoretical study of a single node structure to the design of multinode structures. These neural networks are shown to cancel intersymbol interference in a manner mimicking conventional techniques and simulations demonstrate their sensitivity to symbol estimation errors. In addition the error mechanisms of conventional maximum likelihood equalisers operating on rapidly time-varying channels are investigated and highlight the problems of channel estimation using delayed and often incorrect symbol estimates. The relative sensitivity of Bayesian equalisation techniques to errors in the channel estimate is studied and demonstrates that the structure's equalisation capability is also susceptible to such errors. Applications of multiple channel estimator methods are developed, leading to reduced complexity structures which trade performance for a smaller computational load. These novel structures are shown to provide an improvement over the conventional techniques, especially for rapidly time-varying channels, by reducing the time delay in the channel estimation process. Finally, the use of confidence measures of the equaliser's symbol estimates in order to improve channel estimation is studied and isolates the critical areas in the development of the technique — the production of reliable confidence measures by the equalisers and the statistics of symbol estimation error bursts

Channel Estimation and Equalization for Cooperative Communication

The revolutionary concept of space-time coding introduced in the last decade has demonstrated that the deployment of multiple antennas at the transmitter allows for simultaneous increase in throughput and reliability because of the additional degrees of freedom offered by the spatial dimension of the wireless channel. However, the use of antenna arrays is not practical for deployment in some practical scenarios, e. g. , sensor networks, due to space and power limitations. A new form of realizing transmit diversity has been recently introduced under the name of user cooperation or cooperative diversity. The basic idea behind cooperative diversity rests on the observation that in a wireless environment, the signal transmitted by the source node is overheard by other nodes, which can be defined as "partners" or "relays". The source and its partners can jointly process and transmit their information, creating a "virtual antenna array" and therefore emulating transmit diversity. Most of the ongoing research efforts in cooperative diversity assume frequency flat channels with perfect channel knowledge. However, in practical scenarios, e. g. broadband wireless networks, these assumptions do not apply. Frequency-selective fading and imperfect channel knowledge should be considered as a more realistic channel model. The development of equalization and channel estimation algorithms play a crucial element in the design of digital receivers as their accuracy determine the overall performance. This dissertation creates a framework for designing and analyzing various time and frequency domain equalization schemes, i. e. distributed time reversal (D-TR) STBC, distributed single carrier frequency domain (D-SC-FDE) STBC, and distributed orthogonal frequency division multiplexing (D-OFDM) STBC schemes, for broadband cooperative communication systems. Exploiting the orthogonally embedded in D-STBCs, we were able to maintain low-decoding complexity for all underlying schemes, thus, making them excellent candidates for practical scenarios, such as multi-media broadband communication systems. Furthermore, we propose and analyze various non-coherent and channel estimation algorithms to improve the quality and reliability of wireless communication networks. Specifically, we derive a non-coherent decoding rule which can be implemented in practice by a Viterbi-type algorithm. We demonstrate through the derivation of a pairwise error probability expression that the proposed non-coherent detector guarantees full diversity. Although this decoding rule has been derived assuming quasi-static channels, its inherent channel tracking capability allows its deployment over time-varying channels with a promising performance as a sub-optimal solution. As a possible alternative to non-coherent detection, we also investigate the performance of mismatched-coherent receiver, i. e. , coherent detection with imperfect channel estimation. Our performance analysis demonstrates that the mismatched-coherent receiver is able to collect the full diversity as its non-coherent competitor over quasi-static channels. Finally, we investigate and analyze the effect of multiple antennas deployment at the cooperating terminals assuming different relaying techniques. We derive pairwise error probability expressions quantifying analytically the impact of multiple antenna deployment at the source, relay and/or destination terminals on the diversity order for each of the relaying methods under consideration

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC

Space time transceiver design over multipath fading channels

Imperial Users onl

UNDERWATER COMMUNICATIONS WITH ACOUSTIC STEGANOGRAPHY: RECOVERY ANALYSIS AND MODELING

In the modern warfare environment, communication is a cornerstone of combat competence. However, the increasing threat of communications-denied environments highlights the need for communications systems with low probability of intercept and detection. This is doubly true in the subsurface environment, where communications and sonar systems can reveal the tactical location of platforms and capabilities, subverting their covert mission set. A steganographic communication scheme that leverages existing technologies and unexpected data carriers is a feasible means of increasing assurance of communications, even in denied environments. This research works toward a covert communication system by determining and comparing novel symbol recovery schemes to extract data from a signal transmitted under a steganographic technique and interfered with by a simulated underwater acoustic channel. We apply techniques for reliably extracting imperceptible information from unremarkable acoustic events robust to the variability of the hostile operating environment. The system is evaluated based on performance metrics, such as transmission rate and bit error rate, and we show that our scheme is sufficient to conduct covert communications through acoustic transmissions, though we do not solve the problems of synchronization or equalization.Lieutenant, United States NavyApproved for public release. Distribution is unlimited