866 research outputs found
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
A virtual MIMO dual-hop architecture based on hybrid spatial modulation
International audienceIn this paper, we propose a novel Virtual Multiple-Input-Multiple-Output (VMIMO) architecture based on the concept of Spatial Modulation (SM). Using a dual-hop and Decode-and-Forward protocol, we form a distributed system, called Dual-Hop Hybrid SM (DH-HSM). DH-HSM conveys information from a Source Node (SN) to a Destination Node (DN) via multiple Relay Nodes (RNs). The spatial position of the RNs is exploited for transferring information in addition to, or even without, a conventional symbol. In order to increase the performance of our architecture, while keeping the complexity of the RNs and DN low, we employ linear precoding using Channel State Information (CSI) at the SN. In this way, we form a Receive-Spatial Modulation (R-SM) pattern from the SN to the RNs, which is able to employ a centralized coordinated or a distributed uncoordinated detection algorithm at the RNs. In addition, we focus on the SN and propose two regularized linear precoding methods that employ realistic Imperfect Channel State Information at the Transmitter. The power of each precoder is analyzed theoretically. Using the Bit Error Rate (BER) metric, we evaluate our architecture against the following benchmark systems: 1) single relay; 2) best relay selection; 3) distributed Space Time Block Coding (STBC) VMIMO scheme; and 4) the direct communication link. We show that DH-HSM is able to achieve significant Signal-to-Noise Ratio (SNR) gains, which can be as high as 10.5 dB for a very large scale system setup. In order to verify our simulation results, we provide an analytical framework for the evaluation of the Average Bit Error Probability (ABEP)
Joint Source and Relay Precoding Designs for MIMO Two-Way Relaying Based on MSE Criterion
Properly designed precoders can significantly improve the spectral efficiency
of multiple-input multiple-output (MIMO) relay systems. In this paper, we
investigate joint source and relay precoding design based on the
mean-square-error (MSE) criterion in MIMO two-way relay systems, where two
multi-antenna source nodes exchange information via a multi-antenna
amplify-and-forward relay node. This problem is non-convex and its optimal
solution remains unsolved. Aiming to find an efficient way to solve the
problem, we first decouple the primal problem into three tractable
sub-problems, and then propose an iterative precoding design algorithm based on
alternating optimization. The solution to each sub-problem is optimal and
unique, thus the convergence of the iterative algorithm is guaranteed.
Secondly, we propose a structured precoding design to lower the computational
complexity. The proposed precoding structure is able to parallelize the
channels in the multiple access (MAC) phase and broadcast (BC) phase. It thus
reduces the precoding design to a simple power allocation problem. Lastly, for
the special case where only a single data stream is transmitted from each
source node, we present a source-antenna-selection (SAS) based precoding design
algorithm. This algorithm selects only one antenna for transmission from each
source and thus requires lower signalling overhead. Comprehensive simulation is
conducted to evaluate the effectiveness of all the proposed precoding designs.Comment: 32 pages, 10 figure
Secure Beamforming for MIMO Two-Way Communications with an Untrusted Relay
This paper studies the secure beamforming design in a multiple-antenna
three-node system where two source nodes exchange messages with the help of an
untrusted relay node. The relay acts as both an essential signal forwarder and
a potential eavesdropper. Both two-phase and three-phase two-way relay
strategies are considered. Our goal is to jointly optimize the source and relay
beamformers for maximizing the secrecy sum rate of the two-way communications.
We first derive the optimal relay beamformer structures. Then, iterative
algorithms are proposed to find source and relay beamformers jointly based on
alternating optimization. Furthermore, we conduct asymptotic analysis on the
maximum secrecy sum-rate. Our analysis shows that when all transmit powers
approach infinity, the two-phase two-way relay scheme achieves the maximum
secrecy sum rate if the source beamformers are designed such that the received
signals at the relay align in the same direction. This reveals an important
advantage of signal alignment technique in against eavesdropping. It is also
shown that if the source powers approach zero the three-phase scheme performs
the best while the two-phase scheme is even worse than direct transmission.
Simulation results have verified the efficiency of the secure beamforming
algorithms as well as the analytical findings.Comment: 10 figures, Submitted to IEEE Transactions on Signal Processin
Multipair Full-Duplex Relaying with Massive Arrays and Linear Processing
We consider a multipair decode-and-forward relay channel, where multiple
sources transmit simultaneously their signals to multiple destinations with the
help of a full-duplex relay station. We assume that the relay station is
equipped with massive arrays, while all sources and destinations have a single
antenna. The relay station uses channel estimates obtained from received pilots
and zero-forcing (ZF) or maximum-ratio combining/maximum-ratio transmission
(MRC/MRT) to process the signals. To reduce significantly the loop interference
effect, we propose two techniques: i) using a massive receive antenna array; or
ii) using a massive transmit antenna array together with very low transmit
power at the relay station. We derive an exact achievable rate in closed-form
for MRC/MRT processing and an analytical approximation of the achievable rate
for ZF processing. This approximation is very tight, especially for large
number of relay station antennas. These closed-form expressions enable us to
determine the regions where the full-duplex mode outperforms the half-duplex
mode, as well as, to design an optimal power allocation scheme. This optimal
power allocation scheme aims to maximize the energy efficiency for a given sum
spectral efficiency and under peak power constraints at the relay station and
sources. Numerical results verify the effectiveness of the optimal power
allocation scheme. Furthermore, we show that, by doubling the number of
transmit/receive antennas at the relay station, the transmit power of each
source and of the relay station can be reduced by 1.5dB if the pilot power is
equal to the signal power, and by 3dB if the pilot power is kept fixed, while
maintaining a given quality-of-service
- …