Fifty Years of Noise Modeling and Mitigation in Power-Line Communications.

Building on the ubiquity of electric power infrastructure, power line communications (PLC) has been successfully used in diverse application scenarios, including the smart grid and in-home broadband communications systems as well as industrial and home automation. However, the power line channel exhibits deleterious properties, one of which is its hostile noise environment. This article aims for providing a review of noise modeling and mitigation techniques in PLC. Specifically, a comprehensive review of representative noise models developed over the past fifty years is presented, including both the empirical models based on measurement campaigns and simplified mathematical models. Following this, we provide an extensive survey of the suite of noise mitigation schemes, categorizing them into mitigation at the transmitter as well as parametric and non-parametric techniques employed at the receiver. Furthermore, since the accuracy of channel estimation in PLC is affected by noise, we review the literature of joint noise mitigation and channel estimation solutions. Finally, a number of directions are outlined for future research on both noise modeling and mitigation in PLC

Efficient Detectors for Telegram Splitting based Transmission in Low Power Wide Area Networks with Bursty Interference

Low Power Wide Area (LPWA) networks are known to be highly vulnerable to external in-band interference in terms of packet collisions which may substantially degrade the system performance. In order to enhance the performance in such cases, the telegram splitting (TS) method has been proposed recently. This approach exploits the typical burstiness of the interference via forward error correction (FEC) and offers a substantial performance improvement compared to other methods for packet transmissions in LPWA networks. While it has been already demonstrated that the TS method benefits from knowledge on the current interference state at the receiver side, corresponding practical receiver algorithms of high performance are still missing. The modeling of the bursty interference via Markov chains leads to the optimal detector in terms of a-posteriori symbol error probability. However, this solution requires a high computational complexity, assumes an a-priori knowledge on the interference characteristics and lacks flexibility. We propose a further developed scheme with increased flexibility and introduce an approach to reduce its complexity while maintaining a close-to-optimum performance. In particular, the proposed low complexity solution substantially outperforms existing practical methods in terms of packet error rate and therefore is highly beneficial for practical LPWA network scenarios.Comment: Accepted for publication in IEEE Transactions on Communication

Investigation of non-binary trellis codes designed for impulsive noise environments

PhD ThesisIt is well known that binary codes with iterative decoders can achieve near Shannon limit performance on the additive white Gaussian noise (AWGN) channel, but their performance on more realistic wired or wireless channels can become degraded due to the presence of burst errors or impulsive noise. In such extreme environments, error correction alone cannot combat the serious e ect of the channel and must be combined with the signal processing techniques such as channel estimation, channel equalisation and orthogonal frequency division multiplexing (OFDM). However, even after the received signal has been processed, it can still contain burst errors, or the noise present in the signal maybe non Gaussian. In these cases, popular binary coding schemes such as Low-Density Parity-Check (LDPC) or turbo codes may not perform optimally, resulting in the degradation of performance. Nevertheless, there is still scope for the design of new non-binary codes that are more suitable for these environments, allowing us to achieve further gains in performance. In this thesis, an investigation into good non-binary trellis error-correcting codes and advanced noise reduction techniques has been carried out with the aim of enhancing the performance of wired and wireless communication networks in di erent extreme environments. These environments include, urban, indoor, pedestrian, underwater, and powerline communication (PLC). This work includes an examination of the performance of non-binary trellis codes in harsh scenarios such as underwater communications when the noise channel is additive S S noise. Similar work was also conducted for single input single output (SISO) power line communication systems for single carrier (SC) and multi carrier (MC) over realistic multi-path frequency selective channels. A further examination of multi-input multi-output (MIMO) wired and wireless systems on Middleton class A noise channel was carried out. The main focus of the project was non-binary coding schemes as it is well-known that they outperform their binary counterparts when the channel is bursty. However, few studies have investigated non-binary codes for other environments. The major novelty of this work is the comparison of the performance of non-binary trellis codes with binary trellis codes in various scenarios, leading to the conclusion that non-binary codes are, in most cases, superior in performance to binary codes. Furthermore, the theoretical bounds of SISO and MIMO binary and non-binary convolutional coded OFDM-PLC systems have been investigated for the rst time. In order to validate our results, the implementation of simulated and theoretical results have been obtained for di erent values of noise parameters and on di erent PLC channels. The results show a strong agreement between the simulated and theoretical analysis for all cases.University of Thi-Qar for choosing me for their PhD scholarship and the Iraqi Ministry of Higher Education and Scienti c Research (MOHESR) for granting me the funds to study in UK. In addition, there was ample support towards my stay in the UK from the Iraqi Cultural Attach e in Londo

Modeling and Optimization of Next-Generation Wireless Access Networks

The ultimate goal of the next generation access networks is to provide all network users, whether they are fixed or mobile, indoor or outdoor, with high data rate connectivity, while ensuring a high quality of service. In order to realize this ambitious goal, delay, jitter, error rate and packet loss should be minimized: a goal that can only be achieved through integrating different technologies, including passive optical networks, 4th generation wireless networks, and femtocells, among others. This thesis focuses on medium access control and physical layers of future networks. In this regard, the first part of this thesis discusses techniques to improve the end-to-end quality of service in hybrid optical-wireless networks. In these hybrid networks, users are connected to a wireless base station that relays their data to the core network through an optical connection. Hence, by integrating wireless and optical parts of these networks, a smart scheduler can predict the incoming traffic to the optical network. The prediction data generated herein is then used to propose a traffic-aware dynamic bandwidth assignment algorithm for reducing the end-to-end delay. The second part of this thesis addresses the challenging problem of interference management in a two-tier macrocell/femtocell network. A high quality, high speed connection for indoor users is ensured only if the network has a high signal to noise ratio. A requirement that can be fulfilled with using femtocells in cellular networks. However, since femtocells generate harmful interference to macrocell users in proximity of them, careful analysis and realistic models should be developed to manage the introduced interference. Thus, a realistic model for femtocell interference outside suburban houses is proposed and several performance measures, e.g., signal to interference and noise ratio and outage probability are derived mathematically for further analysis. The quality of service of cellular networks can be degraded by several factors. For example, in industrial environments, simultaneous fading and strong impulsive noise significantly deteriorate the error rate performance. In the third part of this thesis, a technique to improve the bit error rate of orthogonal frequency division multiplexing systems in industrial environments is presented. This system is the most widely used technology in next-generation networks, and is very susceptible to impulsive noise, especially in fading channels. Mathematical analysis proves that the proposed method can effectively mitigate the degradation caused by impulsive noise and significantly improve signal to interference and noise ratio and bit error rate, even in frequency-selective fading channels

High Speed Turbo Tcm Ofdm For Uwb And Powerline System

Turbo Trellis-Coded Modulation (TTCM) is an attractive scheme for higher data rate transmission, since it combines the impressive near Shannon limit error correcting ability of turbo codes with the high spectral efficiency property of TCM codes. We build a punctured parity-concatenated trellis codes in which a TCM code is used as the inner code and a simple parity-check code is used as the outer code. It can be constructed by simple repetition, interleavers, and TCM and functions as standard TTCM but with much lower complexity regarding real world implementation. An iterative bit MAP decoding algorithm is associated with the coding scheme. Orthogonal Frequency Division Multiplexing (OFDM) modulation has been a promising solution for efficiently capturing multipath energy in highly dispersive channels and delivering high data rate transmission. One of UWB proposals in IEEE P802.15 WPAN project is to use multi-band OFDM system and punctured convolutional codes for UWB channels supporting data rate up to 480Mb/s. The HomePlug Networking system using the medium of power line wiring also selects OFDM as the modulation scheme due to its inherent adaptability in the presence of frequency selective channels, its resilience to jammer signals, and its robustness to impulsive noise in power line channel. The main idea behind OFDM is to split the transmitted data sequence into N parallel sequences of symbols and transmit on different frequencies. This structure has the particularity to enable a simple equalization scheme and to resist to multipath propagation channel. However, some carriers can be strongly attenuated. It is then necessary to incorporate a powerful channel encoder, combined with frequency and time interleaving. We examine the possibility of improving the proposed OFDM system over UWB channel and HomePlug powerline channel by using our Turbo TCM with QAM constellation for higher data rate transmission. The study shows that the system can offer much higher spectral efficiency, for example, 1.2 Gbps for OFDM/UWB which is 2.5 times higher than the current standard, and 39 Mbps for OFDM/HomePlug1.0 which is 3 times higher than current standard. We show several essential requirements to achieve high rate such as frequency and time diversifications, multi-level error protection. Results have been confirmed by density evolution. The effect of impulsive noise on TTCM coded OFDM system is also evaluated. A modified iterative bit MAP decoder is provided for channels with impulsive noise with different impulsivity

Space-time-frequency methods for interference-limited communication systems

textTraditionally, noise in communication systems has been modeled as an additive, white Gaussian noise process with independent, identically distributed samples. Although this model accurately reflects thermal noise present in communication system electronics, it fails to capture the statistics of interference and other sources of noise, e.g. in unlicensed communication bands. Modern communication system designers must take into account interference and non-Gaussian noise to maximize efficiencies and capacities of current and future communication networks. In this work, I develop new multi-dimensional signal processing methods to improve performance of communication systems in three applications areas: (i) underwater acoustic, (ii) powerline, and (iii) multi-antenna cellular. In underwater acoustic communications, I address impairments caused by strong, time-varying and Doppler-spread reverberations (self-interference) using adaptive space-time signal processing methods. I apply these methods to array receivers with a large number of elements. In powerline communications, I address impairments caused by non-Gaussian noise arising from devices sharing the powerline. I develop and apply a cyclic adaptive modulation and coding scheme and a factor-graph-based impulsive noise mitigation method to improve signal quality and boost link throughput and robustness. In cellular communications, I develop a low-latency, high-throughput space-time-frequency processing framework used for large scale (up to 128 antenna) MIMO. This framework is used in the world's first 100-antenna MIMO system and processes up to 492 Gbps raw baseband samples in the uplink and downlink directions. My methods prove that multi-dimensional processing methods can be applied to increase communication system performance without sacrificing real-time requirements.Electrical and Computer Engineerin

Transmission of compressed images over power line channel

In the telecommunications industry, the use of existing power lines has drawn the attention of many researchers in the recent years. PLC suffers from impulsive noise that can affect data transmission by causing bit or burst errors. In this thesis, PLC channel was used as a transmission scheme to transmit compressed still images using FFT-OFDM. When lossy compression is applied to an image, a small loss of quality in the compressed image is tolerated. One of the challenging tasks in image compression and transmission is the trade-off between compression ratio and image quality. Therefore, we utilized the latest developments in quality assessment techniques, SSIM, to adaptively optimize this trade-off to the type of image application which the compression is being used for. A comparison between different compression techniques, namely, discrete cosine transform (DCT), discrete wavelet transform (DWT), and block truncation coding (BTC) was carried out. The performance criteria for our compression methods include the compression ratio, relative root-meansquared (RMS) error of the received data, and image quality evaluation via structural similarity index (SSIM). Every link in a powerline has its own attenuation profile depending on the length, layout, and cable types. Also, the influences of multipath fading due to reflections at branching point vary the attenuation profile of the link. As a result, we observed the effect of different parameters of the PLC channel based on the number of paths, and length of link on the quality of the image. Simulations showed that the image quality is highly affected by the interaction of the distance of PLC channel link and the number of multipath reflections. The PLC channel is assumed to be subjected to Gaussian and impulsive noises. There are two types of impulsive noise: asynchronous impulsive noise and periodic impulsive noise synchronous to the mains frequency. BER analysis was performed to compare the performance of the channel for the two types of impulsive noise under three impulsive scenarios. The first scenario is named as "heavily disturbed" and it was measured during the evening hours in a transformer substation in an industrial area. The second scenario is named as "moderately disturbed" and was recorded in a transformer substation in a residential area with detached and terraced houses. The third scenario is named as "weakly disturbed" and was recorded during night-time in an apartment located in a large building. The experiments conducted showed that both types of noise performed similarly in the three impulsive noise scenarios. We implemented Bose-Chaudhuri-Hocquenghen (BCH) coding to study the performance of Power Line Channel (PLC) impaired by impulsive noise and AWGN. BCH codes and RS codes are related and their decoding algorithms are quite similar. A comparison was made between un-coded system and BCH coding system. The performance of the system is assessed by the quality of the image for different sizes of BCH encoder, in three different impulsive environments. Simulation results showed that with BCH coding, the performance of the PLC system has improved dramatically in all three impulsive scenarios