90 research outputs found
Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit
and receive on the same frequency band, which challenges the traditional
assumption in wireless network design. The full-duplex capability enhances
spectral efficiency and decreases latency, which are two key drivers pushing
the performance expectations of next-generation mobile networks. In less than
ten years, in-band FD has advanced from being demonstrated in research labs to
being implemented in standards and products, presenting new opportunities to
utilize its foundational concepts. Some of the most significant opportunities
include using FD to enable wireless networks to sense the physical environment,
integrate sensing and communication applications, develop integrated access and
backhaul solutions, and work with smart signal propagation environments powered
by reconfigurable intelligent surfaces. However, these new opportunities also
come with new challenges for large-scale commercial deployment of FD
technology, such as managing self-interference, combating cross-link
interference in multi-cell networks, and coexistence of dynamic time division
duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa
Heterogeneous Rank Beamforming for Industrial Communications
This paper proposes a novel hardware beamforming architecture, which is
capable of utilizing a different number of Radio Frequency (RF) chains in
different parts of the bandwidth. It also shows that a proportional fairness
scheduler will effectively utilize the high rank part of the bandwidth in a
multi-user setting, thus operating more efficiently and effectively than
classical beamforming schemes.Comment: 10 pages, 14 figures. Submitted to IEEE Transactions on Wireless
Communication
Energy Efficiency in 5G Communications – Conventional to Machine Learning Approaches, Journal of Telecommunications and Information Technology, 2020, nr 4
Demand for wireless and mobile data is increasing along with development of virtual reality (VR), augmented reality (AR), mixed reality (MR), and extended reality (ER) applications. In order to handle ultra-high data exchange rates while offering low latency levels, fifth generation (5G) networks have been proposed. Energy efficiency is one of the key objectives of 5G networks. The notion is defined as the ratio of throughput and total power consumption, and is measured using the number of transmission bits per Joule. In this paper, we review state-of-the-art techniques ensuring good energy efficiency in 5G wireless networks. We cover the base-station on/off technique, simultaneous wireless information and power transfer, small cells, coexistence of long term evolution (LTE) and 5G, signal processing algorithms, and the latest machine learning techniques. Finally, a comparison of a few recent research papers focusing on energy-efficient hybrid beamforming designs in massive multiple-input multiple-output (MIMO) systems is presented. Results show that machine learningbased designs may replace best performing conventional techniques thanks to a reduced complexity machine learning encode
Recommended from our members
Analysis of millimeter wave and massive MIMO cellular networks
Millimeter wave (mmWave) communication and massive multiple-input multiple-output (MIMO) are promising techniques to increase system capacity in 5G cellular networks. The prior frameworks for conventional cellular systems do not directly apply to analyze mmWave or massive MIMO networks, as (i) mmWave cellular networks differ in the different propagation conditions and hardware constraints; and (ii) with a order of magnitude more antennas than conventional multi-user MIMO systems, massive MIMO systems will be operated in time-division duplex (TDD) mode, which renders pilot contamination a primary limiting factor. In this dissertation, I develop stochastic geometry frameworks to analyze the system-level performance of mmWave, sub-6 GHz massive MIMO, and mmWave massive MIMO cellular networks. The proposed models capture the key features of each technique, and allow for tractable signal-to-interference-plus-noise ratio (SINR) and rate analyses. In the first contribution, I develop an mmWave cellular network model that incorporates the blockage effect and directional beamforming, and analyze the SINR and rate distributions as functions of the base station density, blockage parameters, and antenna geometry. The analytical results demonstrate that with a sufficiently dense base station deployment, mmWave cellular networks are capable to achieve comparable SINR coverage and much higher rates than conventional networks. In my second contribution, I analyze the uplink SINR and rate in sub-6 GHz massive MIMO networks with the incorporation of pilot contamination and fractional power control. Based on the analysis, I show scaling laws between the number of antennas and scheduled users per cell that maintain the uplink signal-to-interference ratio (SIR) distributions are different for maximum ratio combining (MRC) and zero-forcing (ZF) receivers. In my third contribution, I extend the sub-6 GHz massive MIMO model to mmWave frequencies, by incorporating key mmWave features. I leverage the proposed model to investigate the asymptotic SINR performance, when the number of antennas goes to infinity. Numerical results show that mmWave massive MIMO outperforms its sub-6 GHz counterpart in cell throughput with a dense base station deployment, while the reverse can be true with a low base station density.Electrical and Computer Engineerin
Experimental Investigations of Millimeter Wave Beamforming
The millimeter wave (mmW) band, commonly referred to as the frequency band between 30 GHz and 300 GHz, is seen as a possible candidate to increase achievable rates for mobile applications due to the existence of free spectrum. However, the high path loss necessitates the use of highly directional antennas. Furthermore, impairments and power constraints make it difficult to provide full digital beamforming systems. In this thesis, we approach this problem by proposing effective beam alignment and beam tracking algorithms for low-complex analog beamforming (ABF) systems, showing their applicability by experimental demonstration. After taking a closer look at particular features of the mmW channel properties and introducing the beamforming as a spatial filter, we begin our investigations with the application of detection theory for the non-convex beam alignment problem. Based on an M-ary hypothesis test, we derive algorithms for defining the length of the training signal efficiently. Using the concept of black-box optimization algorithms, which allow optimization of non-convex algorithms, we propose a beam alignment algorithm for codebook-based ABF based systems, which is shown to reduce the training overhead significantly. As a low-complex alternative, we propose a two-staged gradient-based beam alignment algorithm that uses convex optimization strategies after finding a subregion of the beam alignment function in which the function can be regarded convex. This algorithm is implemented in a real-time prototype system and shows its superiority over the exhaustive search approach in simulations and experiments. Finally, we propose a beam tracking algorithm for supporting mobility. Experiments and comparisons with a ray-tracing channel model show that it can be used efficiently in line of sight (LoS) and non line of sight (NLoS) scenarios for walking-speed movements
- …