5,798 research outputs found
State-of-the-art in Power Line Communications: from the Applications to the Medium
In recent decades, power line communication has attracted considerable
attention from the research community and industry, as well as from regulatory
and standardization bodies. In this article we provide an overview of both
narrowband and broadband systems, covering potential applications, regulatory
and standardization efforts and recent research advancements in channel
characterization, physical layer performance, medium access and higher layer
specifications and evaluations. We also identify areas of current and further
study that will enable the continued success of power line communication
technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on
Selected Areas in Communications. Special Issue on Power Line Communications
and its Integration with the Networking Ecosystem. 201
A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends
This paper examines the security vulnerabilities and threats imposed by the
inherent open nature of wireless communications and to devise efficient defense
mechanisms for improving the wireless network security. We first summarize the
security requirements of wireless networks, including their authenticity,
confidentiality, integrity and availability issues. Next, a comprehensive
overview of security attacks encountered in wireless networks is presented in
view of the network protocol architecture, where the potential security threats
are discussed at each protocol layer. We also provide a survey of the existing
security protocols and algorithms that are adopted in the existing wireless
network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term
evolution (LTE) systems. Then, we discuss the state-of-the-art in
physical-layer security, which is an emerging technique of securing the open
communications environment against eavesdropping attacks at the physical layer.
We also introduce the family of various jamming attacks and their
counter-measures, including the constant jammer, intermittent jammer, reactive
jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the
integration of physical-layer security into existing authentication and
cryptography mechanisms for further securing wireless networks. Finally, some
technical challenges which remain unresolved at the time of writing are
summarized and the future trends in wireless security are discussed.Comment: 36 pages. Accepted to Appear in Proceedings of the IEEE, 201
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
Optimal Real-time Spectrum Sharing between Cooperative Relay and Ad-hoc Networks
Optimization based spectrum sharing strategies have been widely studied.
However, these strategies usually require a great amount of real-time
computation and significant signaling delay, and thus are hard to be fulfilled
in practical scenarios. This paper investigates optimal real-time spectrum
sharing between a cooperative relay network (CRN) and a nearby ad-hoc network.
Specifically, we optimize the spectrum access and resource allocation
strategies of the CRN so that the average traffic collision time between the
two networks can be minimized while maintaining a required throughput for the
CRN. The development is first for a frame-level setting, and then is extended
to an ergodic setting. For the latter setting, we propose an appealing optimal
real-time spectrum sharing strategy via Lagrangian dual optimization. The
proposed method only involves a small amount of real-time computation and
negligible control delay, and thus is suitable for practical implementations.
Simulation results are presented to demonstrate the efficiency of the proposed
strategies.Comment: One typo in the caption of Figure 5 is correcte
Frame Structure Design and Analysis for Millimeter Wave Cellular Systems
The millimeter-wave (mmWave) frequencies have attracted considerable
attention for fifth generation (5G) cellular communication as they offer orders
of magnitude greater bandwidth than current cellular systems. However, the
medium access control (MAC) layer may need to be significantly redesigned to
support the highly directional transmissions, ultra-low latencies and high peak
rates expected in mmWave communication. To address these challenges, we present
a novel mmWave MAC layer frame structure with a number of enhancements
including flexible, highly granular transmission times, dynamic control signal
locations, extended messaging and ability to efficiently multiplex directional
control signals. Analytic formulae are derived for the utilization and control
overhead as a function of control periodicity, number of users, traffic
statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis
can incorporate various front-end MIMO capability assumptions -- a critical
feature of mmWave. Under realistic system and traffic assumptions, the analysis
reveals that the proposed flexible frame structure design offers significant
benefits over designs with fixed frame structures similar to current 4G
long-term evolution (LTE). It is also shown that fully digital beamforming
architectures offer significantly lower overhead compared to analog and hybrid
beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication
- …