295 research outputs found
A role-based software architecture to support mobile service computing in IoT scenarios
The interaction among components of an IoT-based system usually requires using low latency or real time for message delivery, depending on the application needs and the quality of the communication links among the components. Moreover, in some cases, this interaction should consider the use of communication links with poor or uncertain Quality of Service (QoS). Research efforts in communication support for IoT scenarios have overlooked the challenge of providing real-time interaction support in unstable links, making these systems use dedicated networks that are expensive and usually limited in terms of physical coverage and robustness. This paper presents an alternative to address such a communication challenge, through the use of a model that allows soft real-time interaction among components of an IoT-based system. The behavior of the proposed model was validated using state machine theory, opening an opportunity to explore a whole new branch of smart distributed solutions and to extend the state-of-the-art and the-state-of-the-practice in this particular IoT study scenario.Peer ReviewedPostprint (published version
Developing Ubiquitous Sensor Network Platform Using Internet of Things: Application in Precision Agriculture
The application of Information Technologies into Precision Agriculture methods has clear benefits. Precision Agriculture optimises production efficiency, increases quality, minimises environmental impact and reduces the use of resources (energy, water); however, there are different barriers that have delayed its wide development. Some of these main barriers are expensive equipment, the difficulty to operate and maintain and the standard for sensor networks are still under development. Nowadays, new technological development in embedded devices (hardware and communication protocols), the evolution of Internet technologies (Internet of Things) and ubiquitous computing (Ubiquitous Sensor Networks) allow developing less expensive systems, easier to control, install and maintain, using standard protocols with low-power consumption. This work develops and test a low-cost sensor/actuator network platform, based in Internet of Things, integrating machine-to-machine and human-machine-interface protocols. Edge computing uses this multi-protocol approach to develop control processes on Precision Agriculture scenarios. A greenhouse with hydroponic crop production was developed and tested using Ubiquitous Sensor Network monitoring and edge control on Internet of Things paradigm. The experimental results showed that the Internet technologies and Smart Object Communication Patterns can be combined to encourage development of Precision Agriculture. They demonstrated added benefits (cost, energy, smart developing, acceptance by agricultural specialists) when a project is launched.This research was supported by Industrial Computers and Computer Networks program (I2RC) (2015/2016) funded by the University of Alicante
Internet of Things From Hype to Reality
The Internet of Things (IoT) has gained significant mindshare, let alone attention, in academia and the industry especially over the past few years. The reasons behind this interest are the potential capabilities that IoT promises to offer. On the personal level, it paints a picture of a future world where all the things in our ambient environment are connected to the Internet and seamlessly communicate with each other to operate intelligently. The ultimate goal is to enable objects around us to efficiently sense our surroundings, inexpensively communicate, and ultimately create a better environment for us: one where everyday objects act based on what we need and like without explicit instructions
A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System
Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem.
As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres.
Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and
integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ).
PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases.
Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model
Tecnologias IoT para pastoreio e controlo de postura animal
The unwanted and adverse weeds that are constantly growing in vineyards,
force wine producers to repeatedly remove them through the use of mechanical
and chemical methods. These methods include machinery such
as plows and brushcutters, and chemicals as herbicides to remove and
prevent the growth of weeds both in the inter-row and under-vine areas.
Nonetheless, such methods are considered very aggressive for vines, and, in
the second case, harmful for the public health, since chemicals may remain
in the environment and hence contaminate water lines. Moreover, such
processes have to be repeated over the year, making it extremely expensive
and toilsome. Using animals, usually ovines, is an ancient practice used
around the world. Animals, grazing in vineyards, feed from the unwanted
weeds and fertilize the soil, in an inexpensive, ecological and sustainable
way. However, sheep may be dangerous to vines since they tend to feed
on grapes and on the lower branches of the vines, which causes enormous
production losses. To overcome that issue, sheep were traditionally used to
weed vineyards only before the beginning of the growth cycle of grapevines,
thus still requiring the use of mechanical and/or chemical methods during the
remainder of the production cycle.
To mitigate the problems above, a new technological solution was investigated
under the scope of the SheepIT project and developed in the
scope of this thesis. The system monitors sheep during grazing periods on
vineyards and implements a posture control mechanism to instruct them to
feed only from the undesired weeds. This mechanism is based on an IoT
architecture, being designed to be compact and energy efficient, allowing it to
be carried by sheep while attaining an autonomy of weeks.
In this context, the thesis herein sustained states that it is possible to
design an IoT-based system capable of monitoring and conditioning sheep’s
posture, enabling a safe weeding process in vineyards. Moreover, we support
such thesis in three main pillars that match the main contributions of this
work and that are duly explored and validated, namely: the IoT architecture
design and required communications, a posture control mechanism and
the support for a low-cost and low-power localization mechanism. The
system architecture is validated mainly in simulation context while the posture
control mechanism is validated both in simulations and field experiments.
Furthermore, we demonstrate the feasibility of the system and the contribution
of this work towards the first commercial version of the system.O constante crescimento de ervas infestantes obriga os produtores a manter
um processo contínuo de remoção das mesmas com recurso a mecanismos
mecânicos e/ou químicos. Entre os mais populares, destacam-se o uso de
arados e roçadores no primeiro grupo, e o uso de herbicidas no segundo
grupo. No entanto, estes mecanismos são considerados agressivos para as
videiras, assim como no segundo caso perigosos para a saúde pública, visto
que os químicos podem permanecer no ambiente, contaminando frutos e
linhas de água. Adicionalmente, estes processos são caros e exigem mão de
obra que escasseia nos dias de hoje, agravado pela necessidade destes processos
necessitarem de serem repetidos mais do que uma vez ao longo do
ano. O uso de animais, particularmente ovelhas, para controlar o crescimento
de infestantes é uma prática ancestral usada em todo o mundo. As ovelhas,
enquanto pastam, controlam o crescimento das ervas infestantes, ao mesmo
tempo que fertilizam o solo de forma gratuita, ecológica e sustentável. Não
obstante, este método foi sendo abandonado visto que os animais também
se alimentam da rama, rebentos e frutos da videira, provocando naturais
estragos e prejuízos produtivos.
Para mitigar este problema, uma nova solução baseada em tecnologias
de Internet das Coisas é proposta no âmbito do projeto SheepIT, cuja espinha
dorsal foi construída no âmbito desta tese. O sistema monitoriza as ovelhas
enquanto estas pastoreiam nas vinhas, e implementam um mecanismo de
controlo de postura que condiciona o seu comportamento de forma a que se
alimentem apenas das ervas infestantes. O sistema foi incorporado numa
infraestrutura de Internet das Coisas com comunicações sem fios de baixo
consumo para recolha de dados e que permite semanas de autonomia,
mantendo os dispositivos com um tamanho adequado aos animais.
Neste contexto, a tese suportada neste trabalho defende que é possível
projetar uma sistema baseado em tecnologias de Internet das Coisas,
capaz de monitorizar e condicionar a postura de ovelhas, permitindo que
estas pastem em vinhas sem comprometer as videiras e as uvas. A tese
é suportada em três pilares fundamentais que se refletem nos principais
contributos do trabalho, particularmente: a arquitetura do sistema e respetivo
sistema de comunicações; o mecanismo de controlo de postura; e o suporte
para implementação de um sistema de localização de baixo custo e baixo
consumo energético. A arquitetura é validada em contexto de simulação,
e o mecanismo de controlo de postura em contexto de simulação e de
experiências em campo. É também demonstrado o funcionamento do
sistema e o contributo deste trabalho para a conceção da primeira versão
comercial do sistema.Programa Doutoral em Informátic
Building the Hyperconnected Society- Internet of Things Research and Innovation Value Chains, Ecosystems and Markets
This book aims to provide a broad overview of various topics of Internet of Things (IoT), ranging from research, innovation and development priorities to enabling technologies, nanoelectronics, cyber-physical systems, architecture, interoperability and industrial applications. All this is happening in a global context, building towards intelligent, interconnected decision making as an essential driver for new growth and co-competition across a wider set of markets. It is intended to be a standalone book in a series that covers the Internet of Things activities of the IERC – Internet of Things European Research Cluster from research to technological innovation, validation and deployment.The book builds on the ideas put forward by the European Research Cluster on the Internet of Things Strategic Research and Innovation Agenda, and presents global views and state of the art results on the challenges facing the research, innovation, development and deployment of IoT in future years. The concept of IoT could disrupt consumer and industrial product markets generating new revenues and serving as a growth driver for semiconductor, networking equipment, and service provider end-markets globally. This will create new application and product end-markets, change the value chain of companies that creates the IoT technology and deploy it in various end sectors, while impacting the business models of semiconductor, software, device, communication and service provider stakeholders. The proliferation of intelligent devices at the edge of the network with the introduction of embedded software and app-driven hardware into manufactured devices, and the ability, through embedded software/hardware developments, to monetize those device functions and features by offering novel solutions, could generate completely new types of revenue streams. Intelligent and IoT devices leverage software, software licensing, entitlement management, and Internet connectivity in ways that address many of the societal challenges that we will face in the next decade
- …