Desynchronization: Synthesis of asynchronous circuits from synchronous specifications

Asynchronous implementation techniques, which measure logic delays at run time and activate registers accordingly, are inherently more robust than their synchronous counterparts, which estimate worst-case delays at design time, and constrain the clock cycle accordingly. De-synchronization is a new paradigm to automate the design of asynchronous circuits from synchronous specifications, thus permitting widespread adoption of asynchronicity, without requiring special design skills or tools. In this paper, we first of all study different protocols for de-synchronization and formally prove their correctness, using techniques originally developed for distributed deployment of synchronous language specifications. We also provide a taxonomy of existing protocols for asynchronous latch controllers, covering in particular the four-phase handshake protocols devised in the literature for micro-pipelines. We then propose a new controller which exhibits provably maximal concurrency, and analyze the performance of desynchronized circuits with respect to the original synchronous optimized implementation. We finally prove the feasibility and effectiveness of our approach, by showing its application to a set of real designs, including a complete implementation of the DLX microprocessor architectur

A High performance and low cost hardware arcitecture for H.264 transform and quantization algorithms

In this paper, we present a high performance and low cost hardware architecture for real-time implementation of forward transform and quantization and inverse transform and quantization algorithms used in H.264 / MPEG4 Part 10 video coding standard. The hard-ware architecture is based on a reconfigurable datapath with only one multiplier. This hardware is designed to be used as part of a complete low power H.264 video coding system for portable appli-cations. The proposed architecture is implemented in Verilog HDL. The Verilog RTL code is verified to work at 81 MHz in a Xilinx Virtex II FPGA and it is verified to work at 210 MHz in a 0.18´ ASIC implementation. The FPGA and ASIC implementations can code 27 and 70 VGA frames (640x480) per second respectively

A High performance and low power hardware architecture for H.264 cavlc algorithm

In this paper, we present a high performance and low power hard-ware architecture for real-time implementation of Context Adap-tive Variable Length Coding (CAVLC) algorithm used in H.264 / MPEG4 Part 10 video coding standard. This hardware is designed to be used as part of a complete low power H.264 video coding system for portable applications. The proposed architecture is im-plemented in Verilog HDL. The Verilog RTL code is verified to work at 76 MHz in a Xilinx Virtex II FPGA and it is verified to work at 233 MHz in a 0.18´ ASIC implementation. The FPGA and ASIC implementations can code 22 and 67 VGA frames (640x480) per second respectively

Single-Event Upset Analysis and Protection in High Speed Circuits

The effect of single-event transients (SETs) (at a combinational node of a design) on the system reliability is becoming a big concern for ICs manufactured using advanced technologies. An SET at a node of combinational part may cause a transient pulse at the input of a flip-flop and consequently is latched in the flip-flop and generates a soft-error. When an SET conjoined with a transition at a node along a critical path of the combinational part of a design, a transient delay fault may occur at the input of a flip-flop. On the other hand, increasing pipeline depth and using low power techniques such as multi-level power supply, and multi-threshold transistor convert almost all paths in a circuit to critical ones. Thus, studying the behavior of the SET in these kinds of circuits needs special attention. This paper studies the dynamic behavior of a circuit with massive critical paths in the presence of an SET. We also propose a novel flip-flop architecture to mitigate the effects of such SETs in combinational circuits. Furthermore, the proposed architecture can tolerant a single event upset (SEU) caused by particle strike on the internal nodes of a flip-flo

Behavioral modeling of DRACO : a peripheral interface ASIC

This paper describes the behavioral modeling of DRACO, a peripheral interface Application Specific Integrated Circuit (ASIC) developed by Rockwell International for numerical control applications. The behavioral model was generated from a data sheet of the fabricated chip, which primarily described the chip's input-output functionality, physical and operational characteristics, and a functional block diagram. The data sheet contained very little abstract behavioral information. This report describes the abstract behavioral model of the DRACO chip, and uses flowcharts and VHDL to capture the behavior. The behavioral model was developed through reverse engineering of the data sheet description, supplemented by further consultation with designers of the DRACO ASIC at Rockwell Intemational. The report describes typical behavioral test sequences that were applied to the DRACO VHDL model to verify its correctness. The appendices contain the original DRACO datasheet and the VHDL code used to capture DRACO's behavior

A Polyphase Multipath Technique for Software-Defined Radio Transmitters

Transmitter circuits using large signal swings and hard-switched mixers are power-efficient, but also produce unwanted harmonics and sidebands, which are commonly removed using dedicated filters. This paper presents a polyphase multipath technique to relax or eliminate filters by canceling a multitude of harmonics and sidebands. Using this technique, a wideband and flexible power upconverter with a clean output spectrum is realized in 0.13-mum CMOS, aiming at a software-defined radio application. Prototype chips operate from DC to 2.4 GHz with spurs smaller than -40 dBc up to the 17th harmonic (18-path mode) or 5th harmonic (6-path mode) of the transmit frequency, without tuning or calibration. The transmitter delivers 8 mW of power to a 100-Omega load (2.54 Vpp-diff voltage swing) and the complete chip consumes 228 mW from a 1.2-V supply. It uses no filters, but only digital circuits and mixer