Review of Display Technologies Focusing on Power Consumption

Producción CientíficaThis paper provides an overview of the main manufacturing technologies of displays, focusing on those with low and ultra-low levels of power consumption, which make them suitable for current societal needs. Considering the typified value obtained from the manufacturer’s specifications, four technologies—Liquid Crystal Displays, electronic paper, Organic Light-Emitting Display and Electroluminescent Displays—were selected in a first iteration. For each of them, several features, including size and brightness, were assessed in order to ascertain possible proportional relationships with the rate of consumption. To normalize the comparison between different display types, relative units such as the surface power density and the display frontal intensity efficiency were proposed. Organic light-emitting display had the best results in terms of power density for small display sizes. For larger sizes, it performs less satisfactorily than Liquid Crystal Displays in terms of energy efficiency.Junta de Castilla y León (Programa de apoyo a proyectos de investigación-Ref. VA036U14)Junta de Castilla y León (programa de apoyo a proyectos de investigación - Ref. VA013A12-2)Ministerio de Economía, Industria y Competitividad (Grant DPI2014-56500-R

Options Under Uncertainty: An Empirical Investigation of Patterns of Commitment in Display Technologies in the Flat Panel TV Set Industry

This dissertation considers fundamental questions about real options reasoning and its application in the face of uncertainty: do firms behave as real options reasoning predicts, and are there performance benefits from its application? The concept of uncertainty is further developed by considering two primary types: technological uncertainty and market needs uncertainty. A qualitative industry level historical case study is performed on the flat panel TV industry, chosen because it exhibits high technological uncertainty and low market needs uncertainty. Real options logic predicts, in such an industry, that firms will develop and maintain technology options until uncertainty is resolved. Firm level case studies for major incumbent Japanese TV set manufacturers and other relevant firms are performed. Comparison across the cases, and between several specific firms is conducted to test and further develop theory. The firms studied are found to generally behave as predicted by real options logic. Evidence from the study does not present a clear relation between options-related behavior and performance. Although this study identifies evidence not holding options can have large negative performance results, firms holding options as predicted by theory did not realize lasting performance improvements. With one exception, firms attempting to leverage technological capabilities into improved market positions were unable to realize durable improvements in their positions. The development and release of flat panel TV coincided with changes in performance for many firms in the industry; however, these performance changes were short lived. By the end of the study period, industry players had generally returned to the trajectories they were previously on. Between-case analysis of several outlying firms in the sample provides a rich and nuanced view of requirements for firms to dramatically improve performance in the face of high technological uncertainty in a market with very large size potential and relatively well-understood customer needs. This research contributes to the empirical literature on real options and is novel amongst academic research in its coverage of the flat panel display history using Japanese sources. Finally, this dissertation includes managerial implications regarding the usefulness of real options reasoning as well as practical issues in its implementation

Design of a Digital Choral Folder

Advances in electronic displays have led to the creation of electronic readers such as the Amazon Kindle. Electronic paper (e-paper) technology combines the benefits of electronic displays without many of their typical disadvantages. The goal of this project was to bring e-paper to the realm of choral sheet music by designing a digital choral folder. The project involved digital circuit design and embedded microprocessor programming. This report details the design process for developing a Digital Choral Folder with e-paper, as well as recommendations for completing the design. Portions of this report have been redacted to comply with a non-disclosure agreement. The author and project adviser have copies of the complete report

SEPA: Senior Electronic Personal Assistant

[EN] The objective of this thesis was to explore how modern technologies fail in being adopted by older people; the issues that come with older age, and how current technology is proving unable to solve or ease the problems faced by elderly people. Drawing conclusions from this analysis, accessible and adequate design choices for the elderly were studied in order to build a prototype. Based on the study, choices were made trying to balance different factors such as the scope of the project, available parts and time constraints. The last step was to analyze on goal completion and any improvements for better achieving this thesis goals. Also, interesting features that were not included due to constraints were listed.[ES] Investigación, desarrollo y prototipado de una solución hardware con el propósito de facilitar la rutina diaria de las personas mayores y ofrecer asistencia en el seguimiento de algunos tratamientos.García Blanes, D. (2019). SEPA: Senior Electronic Personal Assistant. http://hdl.handle.net/10251/137366TFG

유기발광 다이오드 표시장치를 장착한 이동형 시스템의 전력 공급 최적화

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2012. 8. 장래혁.오늘날 스마트폰, 태블릿 PC 와 같은 휴대용 전자기기는 고성능의 중앙처리장치 (CPU), 대용량 메모리, 대형 화면, 고속의 무선 인터페이스 등을 탑재함에따라 전 력 소모량이 급속히 증가하여 그 전력 소모는 이미 소형의 랩탑 컴퓨터 수준에 이르고 있다. 성능과 전력 소모량의 측면에서 휴대용 전자기기와 랩탑 컴퓨터 사 이의 구분이 점차 사라지고 있음에도 배터리 및 전력 변환 회로는 기존의 설계 원칙들만을 따라 설계되고 있는 실정이다. 삼성전자의 갤럭시 탭 및 Apple 사의 iPad 등 스마트폰 및 태블릿 PC의 경우 1-cell 직렬 리튬 이온 전지를 사용하는 반 면, 랩탑 컴퓨터의 경우는 제조사에 따라 3-cell 에서 5-cell 직렬 등으로 설계되고 있다. 이는 배터리 출력 전압을 다르게 함으로써 전력 변환 효율에 영향을 준다. 전력 변환 회로의 효율 및 배터리의 수명은 입출력 전압/전류를 비롯한 동작 환경의 영향을 받는다. 휴대용 전자기기에 사용되는 각종 전자부품은 전력 소모를 줄이기 위한 다양한 기능들을 구현하고 있으며, 중앙처리장치의 동적 전압/주파 수 조절 기법 등 공급전압의 변화를 수반하는 기법 역시 다양하게 적용되고 있다. 이는 각 장치의 공급 전압 및 전류의 변화로 인한 전력 변환 회로의 효율의 변화 를 초래한다. 따라서 중앙처리장치, 디스플레이 등 주요 전력 소비 장치의 전력 절감 기법을 개발할 때에는 개별 장치의 전력 소비를 줄이는 것과 동시에 개별 장 치의 동작 행태에 대한 정확한 분석에 기반하여 배터리, 전력 변환회로의 설계가 함께이루어져야 한다. 선행 연구를 통해 배터리의 특성을 고려한 배터리 구성의 최적화 기법이 제안되었다 [1]. 중앙처리장치의 동적 전압/주파수 제어 기법에 이어 유기발광다이오드(OLED) 기반 디스플레이의 동적 구동회로 공급 전압 기법이 제안되었다 [2]. 유기발광다 이오드 디스플레이는 전력 소모 및 시야각 등 기존 액정 표시장치에 비해 여러 우수한 특성으로 인해 주목받고 있는 차세대 디스플레이 장치이다. 유기발광다 이오드 디스플레이의 적은 전력 소모량에도 불구하고 화면의 대형화 및 해상도의 고밀도화에 따라 시스템 전력 소모에서 여전히 큰 비중을 차지하고 있다. 유기발 광다이오드 디스플레이의 동적 구동회로 공급 전압 기법(OLED DVS)는 색상의 변화의 기초한 기존의 유기발광다이오드 디스플레이 전력 절감 기법과는 달리 최 소한의 이미지 왜곡만을 수반하여 대부분의 사진, 동영상 등에 적용가능한 전력 절감 기법이다. 해당 기법은 공급 전압의 변화시킬 필요가 있으며, 이를 시스템에 올바르게 통합시키기 위해서는 전력 변환 회로 및 배터리 구성에 미치는 영향을 고려해야 한다. 본 논문에서는 유기발광다이오드 디스플레이의 전력 소모와 함께 전체 시스 템 효율에 미치는 영향을 함께 고려하여 시스템을 최적화한다. 배터리 구성 역 시 기존의 설계 표준 대신 체계적인 시스템 분석에 기반한 최적화가 시도되었다. 공급전압이 조절 가능한 유기발광다이오드 디스플레이 하드웨어 및 제어기 시스 템-온-칩 (System-on-a-chip, SoC) 가 제작되었고, 그 동작 특성이 분석되었다. 기존 스마트폰 및 태블릿 PC 개발용 플랫폼의 전력 변환 효율 및 동작 특성 역시 분석 되었다. 유기발광다이오드 디스플레이의 동적 구동회로 공급 전압 기법의 동작 특성 및 스마트폰 플랫폼의 동작 특성, 배터리 특성에 대한 분석을 기반으로 시스 템 수준에서의 전력 변환 효율이 최적화되었다.Modern mobile devices such as smartphone or tablet PC are typically equipped a high-performance CPU, memory, wireless interface, and display. As a result, their power consumption is as high as a small-size laptop computer. The boundary between the mobile devices and laptop computer is becoming unclear from the perspective of the performance and power. However, their battery and related power conversion architecture are only designed according to the legacy design so far. Smartphone and tablet PCs from major vendors such as iPad from Apple or Galaxy-tab from Samsung uses 1-cell Li-ion battery. The laptop PC typically has 3-cell Li-ion battery. The output voltage of the battery affect system-level power conversion efficiency. Furthermore, traditional power conversion architecture in the mobile computing system is designed only considering the fixed condition where the system-level low-power techniques such as DVFS are becoming mandatory. Such a low-power techniques applied to the major components result in not only load demand fluctuation but also supply voltage changing. It has an effect on the battery lifetime as well as the system-level power delivery efficiency. The efficiency is affected by the operating condition including input voltage, output voltage, and output current. We should consider the operating condition of the major power consumer such as a display to enhance the system-level power delivery efficiency. Therefore, we need to design the system not only from the perspective of the power consumption but also energy storage design. The optimization of battery setup considering battery characteristics was presented in [1]. Beside the DVFS of microprocessor, a power saving technique based on the supply voltage scaling of the OLED driver circuit was recently introduced [2]. An organic light emitting diode (OLED) is a promising display device which has a lot of advantages compared with conventional LCD, but it still consumes significant amount of power consumption due to the size and resolution increasing. The OLED dynamic voltage scaling (OLED DVS) technique is the first OLED display power saving technique that induces only minimal color change to accommodate display of natural images where the existing OLED low-power techniques are based on the color change. The OLED DVS incurs supply voltage change. Therefore we need to consider the system-level power delivery efficiency and battery setup to properly integrate the DVS-enabled OLED display to the system. In this dissertation, we not only optimize the power consumption of the OLED display but also consider its effect on the whole system power efficiency. We perform the optimization of the battery setup by a systematic method instead of the legacy design rule. At first, we develop an algorithm for the OLED DVS for the still images and a histogram-based online method for the image sequence with a hardware board and a SoC. We characterize the behavior of the OLED DVS. Next, we analyze the characteristics of the smartphone and tablet-PC platforms by using the development platforms. We profile the power consumption of each components in the smartphone and power conversion efficiency of the boost converter which is used in the tablet-PC for the display devices. We optimize not only the power consuming components or the conversion system but also the energy storage system based on the battery model and system-level power delivery efficiency analysis.1 Introduction 1.1 Supply Voltage Scaling for OLED Display 1.2 Power Conversion Efficiency in MobileSystems 1.3 Research Motivation 2 Related Work 2.1 Low-Power Techniques for Display Devices 2.1.1 Light Source Control-Based Approaches 2.1.2 User Behavior-Based Approaches 2.1.3 Low-Power Techniques for Controller and Framebuffer 2.1.4 Pre-ChargingforOLED 2.1.5 ColorRemapping 2.2 Battery discharging efficiency aware low-power techniques 2.2.1 Parallel Connection 2.2.2 Constant-Current Regulator-Based Architecture 2.3 System-level power analysis techniques 3 Preliminary 38 3.1 Organic Light Emitting Diode (OLED) Display 3.1.1 OLED Cell Architecture 3.1.2 OLED Panel Architecture 3.1.3 OLED Driver Circuits 3.2 Effect of VDD scaling on driver circuits 3.2.1 VDD scaling for AM drivers 3.2.2 VDD scaling for PWM drivers 4 Supply Voltage Scaling and Image Compensation of OLED displays 4.1 Image quality and power models of OLED panels 4.2 OLED display characterization 4.3 VDD scaling and image compensation 5 OLED DVS implementation 5.1 Hardware prototype implementation 5.2 OLED DVS System-on-Chip implementation 5.3 Optimization of OLED DVS SoC 5.4 VDD transition overhead 6 Power conversion efficiency and delivery architecture in mobile Systems 6.1 Power conversion efficiency model of switching-Mode DC–DC converters 6.2 Power conversion efficiency model of linear regulator power loss model 6.3 Rate Capacity Effect of Li-ion Batteries 7 Power conversion efficiency-aware battery setup optimization with DVS- enabled OLED display 7.1 System-level power efficiency model 7.2 Power conversion efficiency analysis of smartphone platform 7.3 Power conversion efficiency for OLED power supply 7.4 Li-ion battery model 7.4.1 Battery model parameter extraction 7.5 Battery setup optimization 8 Experiments 8.1 Simulation result for OLED display with AM driver 8.2 Measurement result for OLED display with PWM driver 8.3 Design space exploration of battery setup with OLED displays 9 Conclusion 10 Future WorkDocto

ANDROID BASED HOME AUTOMATION AND ENERGY CONSERVATION

Wireless Sensor Network (WSN) consists of three main components: nodes, gateways, and software. The spatially distributed measurement nodes interface with sensors to monitor assets or their environment. In a WSN network the devices are connected to WSN nodes wherein the entire nodes uses Zigbee network to transfer the status of connected applications to a controller which controls the whole applications but the main drawback of Wireless sensor networks is its high interference, low coverage area and ability to control only low power devices. In order to overcome these drawbacks Android equipped devices are used to control the applications over GPRS network. Android equipped devices allow the user to control various applications over wireless networks. Being an open sourced platform it allows the user to design a custom module which controls the home applications by connecting the android equipped device and its corresponding home applications to an MCU wherein it uses relay circuits to connect the entire applications using GPRS network to connect the application controller and the android device. These devices can be used to control industrial applications, home applications like light, fan etc., and thereby conserving electricity

OLEDs AND E-PAPER. Disruptive Potential for the European Display Industry

DG ENTR and JRC/IPTS of the European Commission have launched a series of studies to analyse prospects of success for European ICT industries with respect to emerging technologies. This report concerns display technologies (Organic Light Emitting Diodes and Electronic Paper - or OLEDs and e-paper for short). It assesses whether these technologies could be disruptive, and how well placed EU firms would be to take advantage of this disruption In general, displays are an increasingly important segment of the ICT sector. Since the 1990s and following the introduction of flat panel displays (FPDs), the global display industry has grown dramatically. The market is now (2009) worth about ¿ 100 billion. Geo-politically, the industry is dominated by Asian suppliers, with European companies relegated to a few vertical niches and parts of the value chain (e.g. research, supply of material and equipment). However, a number of new technologies are entering the market, e.g. OLEDs and electronic paper. Such emerging technologies may provide an opportunity for European enterprises to (re-)enter or strengthen their competitive position. OLEDs are composed of polymers that emit light when a current is passed through them. E-paper, on the other hand, is a portable, reusable storage and display medium, typically thin and flexible. Both OLEDs and e-paper have the potential to disrupt the existing displays market, but it is still too soon to say with certainty whether this will occur and when. Success for OLEDs depends on two key technical advances: first, the operating lifetime, and second, the production process. E-paper has a highly disruptive potential since it opens the door to new applications, largely text-based, not just in ICTs but also in consumer goods, pictures and advertising that could use its key properties. It could also displace display technologies that offer text-reading functions in ICT terminals such as tablet notebooks. There are three discrete segments in the OLED value chain where any discontinuity could offer EU firms the opportunity to play a more significant part in the displays sector: (1) original R&D and IPR for devices and for the manufacturing process and material supply/verification; (2) bulk materials for manufacture and glass; and (3) process equipment:. For the e-paper value chain, we can see that the entry of EU suppliers is perhaps possible across more value chain segments than for OLEDs. Apart from the ones mentioned for OLEDs, there are opportunities to enter into complete devices and content provision. In terms of vertical segments, the point of entry in OLED FPDs for Europe is most likely to be in the mass production of smaller FPDs for mobile handsets. In conclusion, OLEDs and e-paper have the potential to disrupt current displays market and in so doing they may enable EU companies to enter at selected points in the value chain to compete with the Asian ICT industry.JRC.J.4-Information Societ