NASA Tech Briefs, January 2009

Tech Briefs are short announcements of innovations originating from research and development activities of the National Aeronautics and Space Administration. They emphasize information considered likely to be transferable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. Topics covered include: The Radio Frequency Health Node Wireless Sensor System; Effects of Temperature on Polymer/Carbon Chemical Sensors; Small CO2 Sensors Operate at Lower Temperature; Tele-Supervised Adaptive Ocean Sensor Fleet; Synthesis of Submillimeter Radiation for Spectroscopy; 100-GHz Phase Switch/Mixer Containing a Slot-Line Transition; Generating Ka-Band Signals Using an X-Band Vector Modulator; SiC Optically Modulated Field-Effect Transistor; Submillimeter-Wave Amplifier Module with Integrated Waveguide Transitions; Metrology System for a Large, Somewhat Flexible Telescope; Economical Implementation of a Filter Engine in an FPGA; Improved Joining of Metal Components to Composite Structures; Machined Titanium Heat-Pipe Wick Structure; Gadolinia-Doped Ceria Cathodes for Electrolysis of CO2; Utilizing Ocean Thermal Energy in a Submarine Robot; Fuel-Cell Power Systems Incorporating Mg-Based H2 Generators; Alternative OTEC Scheme for a Submarine Robot; Sensitive, Rapid Detection of Bacterial Spores; Adenosine Monophosphate-Based Detection of Bacterial Spores; Silicon Microleaks for Inlets of Mass Spectrometers; CGH Figure Testing of Aspherical Mirrors in Cold Vacuums; Series-Coupled Pairs of Silica Microresonators; Precise Stabilization of the Optical Frequency of WGMRs; Formation Flying of Components of a Large Space Telescope; Laser Metrology Heterodyne Phase-Locked Loop; Spatial Modulation Improves Performance in CTIS; High-Performance Algorithm for Solving the Diagnosis Problem; Truncation Depth Rule-of-Thumb for Convolutional Codes; Efficient Method for Optimizing Placement of Sensors

Proceedings of the Workshop on the Scientific Applications of Clocks in Space

The Workshop on Scientific Applications of Clocks in space was held to bring together scientists and technologists interested in applications of ultrastable clocks for test of fundamental theories, and for other science investigations. Time and frequency are the most precisely determined of all physical parameters, and thus are the required tools for performing the most sensitive tests of physical theories. Space affords the opportunity to make measurement, parameters inaccessible on Earth, and enables some of the most original and sensitive tests of fundamental theories. In the past few years, new developments in clock technologies have pointed to the opportunity for flying ultrastable clocks in support of science investigations of space missions. This development coincides with the new NASA paradigm for space flights, which relies on frequent, low-cost missions in place of the traditional infrequent and high-cost missions. The heightened interest in clocks in space is further advanced by new theoretical developments in various fields. For example, recent developments in certain Grand Unified Theory formalisms have vastly increased interest in fundamental tests of gravitation physics with clocks. The workshop included sessions on all related science including relativity and gravitational physics, cosmology, orbital dynamics, radio science, geodynamics, and GPS science and others, as well as a session on advanced clock technology

Kerr Solitons and Brillouin Lasers in Optical Microresonators

Optical resonators are capable of storing electromagnetic energies in the visible and infrared band. The light intensity is greatly enhanced within the resonator, which makes them suitable as a platform for nonlinear optics studies. Here, using silica microresonators as platforms, we explore the fundamental nonlinear dynamics of light induced by Kerr nonlinearity and Brillouin scattering. The first half of the thesis analyzes optical solitons as a result of Kerr nonlinearity, including its universal scaling, its dynamics in the presence of laser feedback, the analytical properties of its relativistic counterpart, as well as its applications as a wavelength reference. The second half of the thesis focuses on stimulated Brillouin lasers and their linewidth performance, demonstrating new performance levels of the Brillouin laser and two correction factors to its linewidth that have been established for semiconductor lasers.</p

Coherent Frequency Conversion from Microwave to Optical Fields in an Erbium Doped Y2SiO5 Crystal: Towards the Single Photon Regime

In the context of quantum information technologies superconducting qubits (SQs) are very attractive devices for the manipulation of quantum states, and present themselves as one of our best candidates to build a quantum processor. They couple naturally to microwave photons, for which suitable quantum memories or a long distance propagation channel don’t exist. A way around these limitations is to turn these microwave photons into optical ones by building a quantum frequency converter: a device by which the frequency of a photon can be changed while preserving its non-classical correlations. Then, optical fibres could be used to link distant SQ-based devices together, facilitating the creation of a network of quantum computers. Moreover, SQs could then be coupled to quantum memories compatible with photons at optical frequencies, which are the most well developed kind of quantum memories at the present time. This thesis explores the possibility to convert single microwave photons into optical photons using erbium doped in a yttrium orthosilicate crystal (Er3+:Y2SiO5). Er3+:Y2SiO5 is a good candidate because it has a naturally occurring optical transition near 1536 nm close to the point where silica optical fibres show their minimum loss. A microwave transition can be found in two different ways: one way is to use the 167 isotope of erbium, which is the only stable isotope that shows hyperfine splitting as it has non-zero nuclear spin. The hyperfine structure of the ground state of 167Er3+:Y2SiO5 spans over about 5 GHz. The other possibility is to use the other stable isotopes of erbium and Zeeman split their ground state using an external magnetic field. A microwave transition near 5 GHz can be achieved with moderate magnetic fields due to the high -factors of Er3+:Y2SiO5. The physical process of interest is a three wave mixing process involving two fields at optical frequencies and one field at microwave frequencies. In order to boost the efficiency of the frequency conversion process the Er3+:Y2SiO5 crystal is placed inside a microwave and an optical resonator. The problem is first explored from the theoretical point of view, where a nonlinear coefficient Λ(2) is derived (analogous to the (2) often used in nonlinear optics), and the interaction between cavity modes and the nonlinear medium is studied. It is predicted that with a sample cooled down to millikelvin temperatures total frequency conversion between microwave and optical fields can be achieved. A preliminary hole burning spectroscopy experiment is performed with the objective of reconstructing the hyperfine structure of the excited state of 167Er3+:Y2SiO5, but the complexity of the problem makes it too difficult to achieve this goal. Then a series of experiments are shown, aimed at determining whether or not frequency conversion at the single photon level is achievable using the even isotopes of erbium in a magnetic field. These experiments are based in the Raman heterodyne spectroscopy technique, which is used in combination with electron paramagnetic resonance and optical absorption spectroscopy. In all experiments the sample is cooled down to cryogenic temperatures near 4 K. A first experiment shows that the frequency conversion process exists in Er3+:Y2SiO5, in a setup where only a microwave resonator is used, but not an optical one. A second experiment is performed in a similar setup, this time presenting a quantitative study of the properties of the frequency conversion process, and its comparison with the theoretical model previously derived. A third experiment is performed, which incorporates an optical cavity to the system. The interaction between the erbium ions and the optical cavity introduces a whole new range of experimental complications, which are studied and discussed. Then, the frequency conversion signal is studied anew, showing an unexpected highly non-linear scaling behaviour with the input powers. A hypothesis explaining this unexpected behaviour is given, referring to stray optical absorption in the inhomogeneous line of Er3+:Y2SiO5 (and in particular 167Er3+:Y2SiO5), which can be bleached out under certain circumstances due to spectral hole burning effects. The overall maximum frequency conversion efficiency observed is of 3 × 10^−4 per Watt of pump laser power. While this value is still far from the target several ways of improvement are proposed, including cooling down the system to millikelvin temperatures, increasing the dopant concentration and modifying the geometry of the resonators

NASA Tech Briefs, November 2000

Topics covered include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Data Acquisition

Nonlinear Physics in Soliton Microcombs

Like rulers of light, optical frequency combs consist of hundreds to millions of coherent laser lines, which are capable of measuring time and frequency with the highest degree of accuracy. Used to rely on table-top mode-locked lasers, optical frequency combs have been recently realized in a miniaturized form, namely the microcomb, using monolithic microresonators. Besides a reduction of footprint, microcombs could also achieve parity with traditional frequency combs in performance by mode-locking through the formation of "light bullets" called dissipative Kerr solitons. These soliton microcombs not only serve as a unique platform to study nonlinear physics, but also offer scalable and cost-effective solutions to many groundbreaking applications, spanning spectroscopy to time standards. In this thesis I will trace the physical origin of soliton microcombs, followed by their experimental realization in high-Q silica microresonators. The impact of several nonlinear process on solitons will be discussed, which leads to novel soliton systems, e.g., Stokes solitons and counter-propagating solitons. Utilizing these nonlinear properties, we show that soliton microcombs can be adapted for high-precision spectroscopic applications. In the end, a real-time method for monitoring transient behavior of solitons will be presented

Engineering planetary lasers for interstellar communication

Transmitting large amounts of data efficiently among neighboring stars will vitally support any eventual contact with extrasolar intelligence, whether alien or human. Laser carriers are particularly suitable for high-quality, targeted links. Space laser transmitter systems designed by this work, based on both demonstrated and imminent advanced space technology, could achieve reliable data transfer rates as high as 1 kb/s to matched receivers as far away as 25 pc, a distance including over 700 approximately solar-type stars. The centerpiece of this demonstration study is a fleet of automated spacecraft incorporating adaptive neural-net optical processing active structures, nuclear electric power plants, annular momentum control devices, and ion propulsion. Together the craft sustain, condition, modulate, and direct to stellar targets an infrared laser beam extracted from the natural mesospheric, solar-pumped, stimulated CO2 emission recently discovered at Venus. For a culture already supported by mature interplanetary industry, the cost of building planetary or high-power space laser systems for interstellar communication would be marginal, making such projects relevant for the next human century. Links using high-power lasers might support data transfer rates as high as optical frequencies could ever allow. A nanotechnological society such as we might become would inevitably use 10 to the 20th power b/yr transmission to promote its own evolutionary expansion out of the galaxy