Time-of-flight CMOS イメージセンサによる高精度・高速距離イメージングに関する研究

Tohoku University博士（工学）thesi

ISMCR 1994: Topical Workshop on Virtual Reality. Proceedings of the Fourth International Symposium on Measurement and Control in Robotics

This symposium on measurement and control in robotics included sessions on: (1) rendering, including tactile perception and applied virtual reality; (2) applications in simulated medical procedures and telerobotics; (3) tracking sensors in a virtual environment; (4) displays for virtual reality applications; (5) sensory feedback including a virtual environment application with partial gravity simulation; and (6) applications in education, entertainment, technical writing, and animation

Applications of Silicon Retinas: from Neuroscience to Computer Vision

Traditional visual sensor technology is firmly rooted in the concept of sequences of image frames. The sequence of stroboscopic images in these "frame cameras" is very different compared to the information running from the retina to the visual cortex. While conventional cameras have improved in the direction of smaller pixels and higher frame rates, the basics of image acquisition have remained the same. Event-based vision sensors were originally known as "silicon retinas" but are now widely called "event cameras." They are a new type of vision sensors that take inspiration from the mechanisms developed by nature for the mammalian retina and suggest a different way of perceiving the world. As in the neural system, the sensed information is encoded in a train of spikes, or so-called events, comparable to the action potential generated in the nerve. Event-based sensors produce sparse and asynchronous output that represents in- formative changes in the scene. These sensors have advantages in terms of fast response, low latency, high dynamic range, and sparse output. All these char- acteristics are appealing for computer vision and robotic applications, increasing the interest in this kind of sensor. However, since the sensor’s output is very dif- ferent, algorithms applied for frames need to be rethought and re-adapted. This thesis focuses on several applications of event cameras in scientific scenarios. It aims to identify where they can make the difference compared to frame cam- eras. The presented applications use the Dynamic Vision Sensor (event camera developed by the Sensors Group of the Institute of Neuroinformatics, University of Zurich and ETH). To explore some applications in more extreme situations, the first chapters of the thesis focus on the characterization of several advanced versions of the standard DVS. The low light condition represents a challenging situation for every vision sensor. Taking inspiration from standard Complementary Metal Oxide Semiconductor (CMOS) technology, the DVS pixel performances in a low light scenario can be improved, increasing sensitivity and quantum efficiency, by using back-side illumination. This thesis characterizes the so-called Back Side Illumination DAVIS (BSI DAVIS) camera and shows results from its application in calcium imaging of neural activity. The BSI DAVIS has shown better performance in the low light scene due to its high Quantum Efficiency (QE) of 93% and proved to be the best type of technology for microscopy application. The BSI DAVIS allows detecting fast dynamic changes in neural fluorescent imaging using the green fluorescent calcium indicator GCaMP6f. Event camera advances have pushed the exploration of event-based cameras in computer vision tasks. Chapters of this thesis focus on two of the most active research areas in computer vision: human pose estimation and hand gesture classification. Both chapters report the datasets collected to achieve the task, fulfilling the continuous need for data for this kind of new technology. The Dynamic Vision Sensor Human Pose dataset (DHP19) is an extensive collection of 33 whole-body human actions from 17 subjects. The chapter presents the first benchmark neural network model for 3D pose estimation using DHP19. The network archives a mean error of less than 8 mm in the 3D space, which is comparable with frame-based Human Pose Estimation (HPE) methods using frames. The gesture classification chapter reports an application running on a mobile device and explores future developments in the direction of embedded portable low power devices for online processing. The sparse output from the sensor suggests using a small model with a reduced number of parameters and low power consumption. The thesis also describes pilot results from two other scientific imaging applica- tions for raindrop size measurement and laser speckle analysis presented in the appendices

Autonomous Systems, Robotics, and Computing Systems Capability Roadmap: NRC Dialogue

Contents include the following: Introduction. Process, Mission Drivers, Deliverables, and Interfaces. Autonomy. Crew-Centered and Remote Operations. Integrated Systems Health Management. Autonomous Vehicle Control. Autonomous Process Control. Robotics. Robotics for Solar System Exploration. Robotics for Lunar and Planetary Habitation. Robotics for In-Space Operations. Computing Systems. Conclusion

An inclusive survey of contactless wireless sensing: a technology used for remotely monitoring vital signs has the potential to combating COVID-19

With the Coronavirus pandemic showing no signs of abating, companies and governments around the world are spending millions of dollars to develop contactless sensor technologies that minimize the need for physical interactions between the patient and healthcare providers. As a result, healthcare research studies are rapidly progressing towards discovering innovative contactless technologies, especially for infants and elderly people who are suffering from chronic diseases that require continuous, real-time control, and monitoring. The fusion between sensing technology and wireless communication has emerged as a strong research candidate choice because wearing sensor devices is not desirable by patients as they cause anxiety and discomfort. Furthermore, physical contact exacerbates the spread of contagious diseases which may lead to catastrophic consequences. For this reason, research has gone towards sensor-less or contactless technology, through sending wireless signals, then analyzing and processing the reflected signals using special techniques such as frequency modulated continuous wave (FMCW) or channel state information (CSI). Therefore, it becomes easy to monitor and measure the subject’s vital signs remotely without physical contact or asking them to wear sensor devices. In this paper, we overview and explore state-of-the-art research in the field of contactless sensor technology in medicine, where we explain, summarize, and classify a plethora of contactless sensor technologies and techniques with the highest impact on contactless healthcare. Moreover, we overview the enabling hardware technologies as well as discuss the main challenges faced by these systems.This work is funded by the scientific and technological research council of Turkey (TÜBITAK) under grand 119E39

Characterization of multiphase flows integrating X-ray imaging and virtual reality

Multiphase flows are used in a wide variety of industries, from energy production to pharmaceutical manufacturing. However, because of the complexity of the flows and difficulty measuring them, it is challenging to characterize the phenomena inside a multiphase flow. To help overcome this challenge, researchers have used numerous types of noninvasive measurement techniques to record the phenomena that occur inside the flow. One technique that has shown much success is X-ray imaging. While capable of high spatial resolutions, X-ray imaging generally has poor temporal resolution. This research improves the characterization of multiphase flows in three ways. First, an X-ray image intensifier is modified to use a high-speed camera to push the temporal limits of what is possible with current tube source X-ray imaging technology. Using this system, sample flows were imaged at 1000 frames per second without a reduction in spatial resolution. Next, the sensitivity of X-ray computed tomography (CT) measurements to changes in acquisition parameters is analyzed. While in theory CT measurements should be stable over a range of acquisition parameters, previous research has indicated otherwise. The analysis of this sensitivity shows that, while raw CT values are strongly affected by changes to acquisition parameters, if proper calibration techniques are used, acquisition parameters do not significantly influence the results for multiphase flow imaging. Finally, two algorithms are analyzed for their suitability to reconstruct an approximate tomographic slice from only two X-ray projections. These algorithms increase the spatial error in the measurement, as compared to traditional CT; however, they allow for very high temporal resolutions for 3D imaging. The only limit on the speed of this measurement technique is the image intensifier-camera setup, which was shown to be capable of imaging at a rate of at least 1000 FPS. While advances in measurement techniques for multiphase flows are one part of improving multiphase flow characterization, the challenge extends beyond measurement techniques. For improved measurement techniques to be useful, the data must be accessible to scientists in a way that maximizes the comprehension of the phenomena. To this end, this work also presents a system for using the Microsoft Kinect sensor to provide natural, non-contact interaction with multiphase flow data. Furthermore, this system is constructed so that it is trivial to add natural, non-contact interaction to immersive visualization applications. Therefore, multiple visualization applications can be built that are optimized to specific types of data, but all leverage the same natural interaction. Finally, the research is concluded by proposing a system that integrates the improved X-ray measurements, with the Kinect interaction system, and a CAVE automatic virtual environment (CAVE) to present scientists with the multiphase flow measurements in an intuitive and inherently three-dimensional manner

Neuromorphic perception for greenhouse technology using event-based sensors

Event-Based Cameras (EBCs), unlike conventional cameras, feature independent pixels that asynchronously generate outputs upon detecting changes in their field of view. Short calculations are performed on each event to mimic the brain. The output is a sparse sequence of events with high temporal precision. Conventional computer vision algorithms do not leverage these properties. Thus a new paradigm has been devised. While event cameras are very efficient in representing sparse sequences of events with high temporal precision, many approaches are challenged in applications where a large amount of spatially-temporally rich information must be processed in real-time. In reality, most tasks in everyday life take place in complex and uncontrollable environments, which require sophisticated models and intelligent reasoning. Typical hard problems in real-world scenes are detecting various non-uniform objects or navigation in an unknown and complex environment. In addition, colour perception is an essential fundamental property in distinguishing objects in natural scenes. Colour is a new aspect of event-based sensors, which work fundamentally differently from standard cameras, measuring per-pixel brightness changes per colour filter asynchronously rather than measuring “absolute” brightness at a constant rate. This thesis explores neuromorphic event-based processing methods for high-noise and cluttered environments with imbalanced classes. A fully event-driven processing pipeline was developed for agricultural applications to perform fruits detection and classification to unlock the outstanding properties of event cameras. The nature of features in such data was explored, and methods to represent and detect features were demonstrated. A framework for detecting and classifying features was developed and evaluated on the N-MNIST and Dynamic Vision Sensor (DVS) gesture datasets. The same network was evaluated on laboratory recorded and real-world data with various internal variations for fruits detection such as overlap, variation in size and appearance. In addition, a method to handle highly imbalanced data was developed. We examined the characteristics of spatio-temporal patterns for each colour filter to help expand our understanding of this novel data and explored their applications in classification tasks where colours were more relevant features than shapes and appearances. The results presented in this thesis demonstrate the potential and efficacy of event- based systems by demonstrating the applicability of colour event data and the viability of event-driven classification