DESIGN OF RELIABLE AND SUSTAINABLE WIRELESS SENSOR NETWORKS: CHALLENGES, PROTOCOLS AND CASE STUDIES

Integrated with the function of sensing, processing, and wireless communication, wireless sensors are attracting strong interest for a variety of monitoring and control applications. Wireless sensor networks (WSNs) have been deployed for industrial and remote monitoring purposes. As energy shortage is a worldwide problem, more attention has been placed on incorporating energy harvesting devices in WSNs. The main objective of this research is to systematically study the design principles and technical approaches to address three key challenges in designing reliable and sustainable WSNs; namely, communication reliability, operation with extremely low and dynamic power sources, and multi-tier network architecture. Mathematical throughput models, sustainable WSN communication strategies, and multi-tier network architecture are studied in this research to address these challenges, leading to protocols for reliable communication, energy-efficient operation, and network planning for specific application requirements. To account for realistic operating conditions, the study has implemented three distinct WSN testbeds: a WSN attached to the high-speed rotating spindle of a turning lathe, a WSN powered by a microbial fuel cell based energy harvesting system, and a WSN with a multi-tier network architecture. With each testbed, models and protocols are extracted, verified and analyzed. Extensive research has studied low power WSNs and energy harvesting capabilities. Despite these efforts, some important questions have not been well understood. This dissertation addresses the following three dimensions of the challenge. First, for reliable communication protocol design, mathematical throughput or energy efficiency estimation models are essential, yet have not been investigated accounting for specific application environment characteristics and requirements. Second, for WSNs with energy harvesting power sources, most current networking protocols do not work efficiently with the systems considered in this dissertation, such as those powered by extremely low and dynamic energy sources. Third, for multi-tier wireless network system design, routing protocols that are adaptive to real-world network conditions have not been studied. This dissertation focuses on these questions and explores experimentally derived mathematical models for designing protocols to meet specific application requirements. The main contributions of this research are 1) for industrial wireless sensor systems with fast-changing but repetitive mobile conditions, understand the performance and optimal choice of reliable wireless sensor data transmission methods, 2) for ultra-low energy harvesting wireless sensor devices, design an energy neutral communication protocol, and 3) for distributed rural wireless sensor systems, understand the efficiency of realistic routing in a multi-tier wireless network. Altogether, knowledge derived from study of the systems, models, and protocols in this work fuels the establishment of a useful framework for designing future WSNs

Design of high fidelity building energy monitoring system

Building energy meter network, based on per-appliance monitoring system, willbe an important part of the Advanced Metering Infrastructure. Two key issues exist for designing such networks. One is the network structure to be used. The other is the implementation of the network structure on a large amount of small low power devices, and the maintenance of high quality communication when the devices have electric connection with high voltage AC line. The recent advancement of low-power wireless communication makes itself the right candidate for house and building energy network. Among all kinds of wireless solutions, the low speed but highly reliable 802.15.4 radio has been chosen in this design. While many network-layer solutions have been provided on top of 802.15.4, an IPv6 based method is used in this design. 6LOWPAN is the particular protocol which adapts IP on low power personal network radio. In order to extend the network into building area without, a specific network layer routing mechanism-RPL, is included in this design. The fundamental unit of the building energy monitoring system is a smart wall plug. It is consisted of an electricity energy meter, a RF communication module and a low power CPU. The real challenge for designing such a device is its network firmware. In this design, IPv6 is implemented through Contiki operation system. Customize hardware driver and meter application program have been developed on top of the Contiki OS. Some experiments have been done, in order to prove the network ability of this system

Performance testing of a low power consumption wireless sensor communication system integrated with an energy harvesting power source

This paper presents the performance testing results of a wireless sensor communication system with low power consumption integrated with a vibration energy harvesting power source. The experiments focus on the system’s capability to perform continuous monitoring and to wirelessly transmit the data acquired from the sensors to a user base station, completely battery-free. Energy harvesting technologies together with system design optimisation for power consumption minimisation ensure the system’s energy autonomous capability demonstrated in this paper by presenting the promising testing results achieved following its integration with Structural Health Monitoring (SHM) and Body Area Network (BAN) applications

Robust Controller for Delays and Packet Dropout Avoidance in Solar-Power Wireless Network

Solar Wireless Networked Control Systems (SWNCS) are a style of distributed control systems where sensors, actuators, and controllers are interconnected via a wireless communication network. This system setup has the benefit of low cost, flexibility, low weight, no wiring and simplicity of system diagnoses and maintenance. However, it also unavoidably calls some wireless network time delays and packet dropout into the design procedure. Solar lighting system offers a clean environment, therefore able to continue for a long period. SWNCS also offers multi Service infrastructure solution for both developed and undeveloped countries. The system provides wireless controller lighting, wireless communications network (WI-FI/WIMAX), CCTV surveillance, and wireless sensor for weather measurement which are all powered by solar energy

Flexible Multimodal Sub-Gigahertz Communication for Heterogeneous Internet of Things Applications

To realize low-power and low-cost wireless communication over long distances, several wireless standards using sub-1 GHz frequencies have recently been proposed, each with their own strengths and weaknesses in terms of coverage, energy consumption, and throughput. However, none of them are currently flexible enough to satisfy the requirements of future dynamic and heterogeneous IoT applications. To alleviate this, a novel architecture that uses a multimodal device for flexibly employing a variety of heterogeneous sub-1 GHz wireless networks is proposed. It greatly increases network flexibility, resilience, and performance. A device design is presented together with an abstraction layer that combines the different networks into a single flexible virtual network substrate. The article elaborates on the qualitative advantages of this approach. Measurement-based simulation results show advantages in terms of energy efficiency, with significant reduction in energy use compared to a single-technology solution in a representative IoT track and trace scenario. Finally, the article identifies several open research challenges that need to be resolved to fully realize this vision of flexible multimodal communication for demanding IoT applications

Control-guided Communication: Efficient Resource Arbitration and Allocation in Multi-hop Wireless Control Systems

In future autonomous systems, wireless multi-hop communication is key to enable collaboration among distributed agents at low cost and high flexibility. When many agents need to transmit information over the same wireless network, communication becomes a shared and contested resource. Event-triggered and self-triggered control account for this by transmitting data only when needed, enabling significant energy savings. However, a solution that brings those benefits to multi-hop networks and can reallocate freed up bandwidth to additional agents or data sources is still missing. To fill this gap, we propose control-guided communication, a novel co-design approach for distributed self-triggered control over wireless multi-hop networks. The control system informs the communication system of its transmission demands ahead of time, and the communication system allocates resources accordingly. Experiments on a cyber-physical testbed show that multiple cart-poles can be synchronized over wireless, while serving other traffic when resources are available, or saving energy. These experiments are the first to demonstrate and evaluate distributed self-triggered control over low-power multi-hop wireless networks at update rates of tens of milliseconds.Comment: Accepted final version to appear in: IEEE Control Systems Letter

Reliability analysis of wireless sensor network for smart farming applications

Wireless Sensor Networks are subjected to some design constraints (e.g., processing capability, storage memory, energy consumption, fixed deployment, etc.) and to outdoor harsh conditions that deeply affect the network reliability. The aim of this work is to provide a deeper understanding about the way redundancy and node deployment affect the network reliability. In more detail, the paper analyzes the design and implementation of a wireless sensor network for low-power and low-cost applications and calculates its reliability considering the real environmental conditions and the real arrangement of the nodes deployed in the field. The reliability of the system has been evaluated by looking for both hardware failures and communication errors. A reliability prediction based on different handbooks has been carried out to estimate the failure rate of the nodes self-designed and self-developed to be used under harsh environments. Then, using the Fault Tree Analysis the real deployment of the nodes is taken into account considering the Wi-Fi coverage area and the possible communication link between nearby nodes. The findings show how different node arrangements provide significantly different reliability. The positioning is therefore essential in order to obtain maximum performance from a Wireless sensor network