Low-cost Printable Robots in Education

The final publication is available at Springer via http://dx.doi.org/10.1007/s10846-015-0199-xThe wider availability of 3D printing has enabled small printable robots (or printbots) to be incorporated directly into engineering courses. Printbots can be used in many ways to enhance lifelong learning skills, strengthen understanding and foster teamwork and collaboration. The experiences outlined in this paper were used in our teaching during the last academic year, although much of the methodology and many of the activities have been used and developed over the past 8 years. They include project based assignments carried out by multidisciplinary and multicultural teams, a number of theoretical and practical classroom and laboratory activities all aimed at familiarizing students with fundamental concepts, programming and simulation, and which now form part of our regular robotics courses, and some brief descriptions of how printable robots are being used by students carrying out final projects for Bachelor and Master degrees. The online resources show many of these activities in action.Armesto Ángel, L.; Fuentes-Durá, P.; Perry, DR. (2016). Low-cost Printable Robots in Education. Journal of Intelligent and Robotic Systems. 81(1):5-24. doi:10.1007/s10846-015-0199-xS524811Criteria for accrediting engineering programs (Unknown Month 2015, 2014). http://www.abet.org/eac-criteria-2014-2015Board, N.S.: Moving forward to improve engineering education (2007). http://www.nsf.gov/pubs/2007/nsb07122/nsb07122.pdfCampion, G., Bastin, G., d’Andréa Novel, B.: Structural properties and classification of kinematic and dynamic models of wheeled mobile robots. IEEE Trans. Robot. Autom. 12(1), 47–62 (1996)Carberry, A.R., Lee, H.-S., Ohland, M.W.: Measuring engineering design self-efficacy. J. Eng. Educ. 99(1), 71–79 (2010)Castro. A.: Robotic arm with 6 dof (2012). http://www.thingiverse.com/thing:30163Choset, H., Lynch, K.M., Hutchinson, S., Kantor, G.A., Burgard, W., Kavraki, L.E., Thrun, S.: Principles of Robot Motion: Theory, Algorithms, and Implementations. MIT Press, Cambridge MA (2005)d’Andréa Novel, B., Campion, G., Bastin, G.: Control of nonholonomic wheeled mobile robots by state feedback linearization. Int. J. Robot. Res. 14(6), 543–559 (1995)Denavit, J., Hartenberg, R.S.: A kinematic notation for lower-pair mechanisms based on matrices. Trans. ASME J. Appl. Mech 22(2), 215–221 (1955)Dowdall. J.: Rofi robot five (2012). http://www.projectbiped.com/prototypes/rofiEliot, M., Howard, P., Nouwens, F., Stojcevski, A., Mann, L., Prpic, J., Gabb, R., Venkatesan, S., Kolmos, A.: Developing a conceptual model for the effective assessment of individual student learning in team-based subjects. Australas. J. Eng. Educ. 18(1), 105–112 (2012)Fox, D., Burgard, W., Thrun, S.: The dynamic window approach to collision avoidance. Robot. Autom. Mag. IEEE 4(1), 23–33 (1997)Fuentes-Dura, P., Armesto, L., Perry, D.: Multidisciplinary projects: Critical points and perceptions in valladolid in innovation and quality in engineering education. In: Innovation and Quality in Engineering Education, pp 315–331 (2012)Fuentes-Dura, P., Cazorla, M.P., Molina, M.G., Perry, D.: European project semester: Good practices for competence acquisition. In: Valencia Global, pp 165– 172 (2014)González, J., Barrientos, A., Prieto-Moreno, A., de Frutos, M.A.: Miniskybot 2 (2012). http://www.iearobotics.com/wiki/index.php?Miniskybot_2Gonzalez-Gomez, J., Valero-Gomez, A., Prieto-Moreno, A., Abderrahim, M.: A new open source 3d-printable mobile robotic platform for education. In: Rckert, U., Joaquin, S., Felix, W. (eds.) Advances in Autonomous Mini Robots, pp 49–62. Springer, Berlin Heidelberg (2012)Gonzlez, J., Wagenaar, R. (eds.): Tuning Educational Structures in Europe University of Deusto and Groningen. Deusto (2003)Heinrich, E., Bhattacharya, M., Rayudu, R.: Preparation for lifelong learning using eportfolios. Eur. J. Eng. Educ. 32(6), 653–663 (2007)Khatib, O.: Real-time obstacle avoidance for manipulators and mobile robots. The Int. J. Robot. Res. 5(1), 90–98 (1986)Krassman, J.: Quadcopter hummingbird ii (2013). http://www.thingiverse.com/thing:167721Langevin, G.: Inmoov (2012). http://www.inmoov.frMadox: ecanum wheel rover 2 (2011). http://www.madox.net/blog/2011/01/24/mecanum-wheel-rover-2Miles, M.B., Analysis, A.M.: Huberman. Qualitative Data: An Expanded Sourcebook. SAGE Publications (1994)Minguez, J., Montano, L.: Nearness diagram (nd) navigation: Collision avoidance in troublesome scenarios. IEEE Trans. Robot. Autom. 20, 2004 (2004)Olalla: Caterpillator v1.1 (2011). http://www.thingiverse.com/thing:8559Ollero, A.: Robótica. Manipuladores y robots móviles Marcombo, S.A. Barcelona (2001)Price, M.: Hf08 hexapod robot (2012). http://www.heliumfrog.com/hf08robot/hf08blog.htmlRawat, K., Massiha, G.: A hands-on laboratory based approach to undergraduate robotics education. In: Proceedings of 2004 IEEE International Conference on Robotics and Automation 2, pp 1370–1374 (2004)Robotics, C.: Virtual experimentation robotic platform (v-rep) (2013). www.coppeliarobotics.comScott, B.: Principles of problem and project based learning the aalborg model. Aalbord University (2010)Teichler, U., Schonburg, H.: editors. Comparative Perspectives on Higher Education and Graduate Employment and Work Experiences from Twelve Countries. Kluwer Pub. (2004)Ulrich, I., Borenstein, J.: Vfh+: reliable obstacle avoidance for fast mobile robots. In: Robotics and Automation, 1998. Proceedings, volume 2, pp 1572–1577 (1998)Verner, I., Waks, S., Kolberg, E.: Educational robotics An insight into systems engineering. Eur. J. Eng. Educ. 24(2), 201–212 (1999)C.y.A. Vicerrectorado de Estudios: Dimensiones competenciales upv (2013). http://www.upv.es/contenidos/ICEP/info/DimensionesCompetenciales.pdfWampler, C.W.: Manipulator inverse kinematic solutions based on vector formulations and damped least squares methods. IEEE Trans. Syst. Man, Cybern. 16(1), 93–101 (1986)Weinberg, J., Yu, X.: Robotics in education Low-cost platforms for teaching integrated systems. Robot. Autom. Mag. IEEE 10(2), 4–6 (2003

OPEB: Open Physical Environment Benchmark for Artificial Intelligence

Artificial Intelligence methods to solve continuous- control tasks have made significant progress in recent years. However, these algorithms have important limitations and still need significant improvement to be used in industry and real- world applications. This means that this area is still in an active research phase. To involve a large number of research groups, standard benchmarks are needed to evaluate and compare proposed algorithms. In this paper, we propose a physical environment benchmark framework to facilitate collaborative research in this area by enabling different research groups to integrate their designed benchmarks in a unified cloud-based repository and also share their actual implemented benchmarks via the cloud. We demonstrate the proposed framework using an actual implementation of the classical mountain-car example and present the results obtained using a Reinforcement Learning algorithm.Comment: Accepted in 3rd IEEE International Forum on Research and Technologies for Society and Industry 201

Printable Flexible Robots for Remote Learning

The COVID-19 pandemic has revealed the importance of digital fabrication to enable online learning, which remains a challenge for robotics courses. We introduce a teaching methodology that allows students to participate remotely in a hands-on robotics course involving the design and fabrication of robots. Our methodology employs 3D printing techniques with flexible filaments to create innovative soft robots; robots are made from flexible, as opposed to rigid, materials. Students design flexible robotic components such as actuators, sensors, and controllers using CAD software, upload their designs to a remote 3D printing station, monitor the print with a web camera, and inspect the components with lab staff before being mailed for testing and assembly. At the end of the course, students will have iterated through several designs and created fluidically-driven soft robots. Our remote teaching methodology enables educators to utilize 3D printing resources to teach soft robotics and cultivate creativity among students to design novel and innovative robots. Our methodology seeks to democratize robotics engineering by decoupling hands-on learning experiences from expensive equipment in the learning environment.Comment: 9 pages, 4 figures, peer reviewed and presented paper at American Society of Engineering Education, April 22-23rd, 2022 - Wentworth Institute of Technolog

3D printed pneumatic soft actuators and sensors: their modeling, performance quantification, control and applications in soft robotic systems

Continued technological progress in robotic systems has led to more applications where robots and humans operate in close proximity and even physical contact in some cases. Soft robots, which are primarily made of highly compliant and deformable materials, provide inherently safe features, unlike conventional robots that are made of stiff and rigid components. These robots are ideal for interacting safely with humans and operating in highly dynamic environments. Soft robotics is a rapidly developing field exploiting biomimetic design principles, novel sensor and actuation concepts, and advanced manufacturing techniques. This work presents novel soft pneumatic actuators and sensors that are directly 3D printed in one manufacturing step without requiring postprocessing and support materials using low-cost and open-source fused deposition modeling (FDM) 3D printers that employ an off-the-shelf commercially available soft thermoplastic poly(urethane) (TPU). The performance of the soft actuators and sensors developed is optimized and predicted using finite element modeling (FEM) analytical models in some cases. A hyperelastic material model is developed for the TPU based on its experimental stress-strain data for use in FEM analysis. The novel soft vacuum bending (SOVA) and linear (LSOVA) actuators reported can be used in diverse robotic applications including locomotion robots, adaptive grippers, parallel manipulators, artificial muscles, modular robots, prosthetic hands, and prosthetic fingers. Also, the novel soft pneumatic sensing chambers (SPSC) developed can be used in diverse interactive human-machine interfaces including wearable gloves for virtual reality applications and controllers for soft adaptive grippers, soft push buttons for science, technology, engineering, and mathematics (STEM) education platforms, haptic feedback devices for rehabilitation, game controllers and throttle controllers for gaming and bending sensors for soft prosthetic hands. These SPSCs are directly 3D printed and embedded in a monolithic soft robotic finger as position and touch sensors for real-time position and force control. One of the aims of soft robotics is to design and fabricate robotic systems with a monolithic topology embedded with its actuators and sensors such that they can safely interact with their immediate physical environment. The results and conclusions of this thesis have significantly contributed to the realization of this aim

Origami-Inspired Printed Robots

Robot manufacturing is currently highly specialized, time consuming, and expensive, limiting accessibility and customization. Existing rapid prototyping techniques (e.g., 3-D printing) can achieve complex geometries and are becoming increasingly accessible; however, they are limited to one or two materials and cannot seamlessly integrate active components. We propose an alternative approach called printable robots that takes advantage of available planar fabrication methods to create integrated electromechanical laminates that are subsequently folded into functional 3-D machines employing origami-inspired techniques. We designed, fabricated, and tested prototype origami robots to address the canonical robotics challenges of mobility and manipulation, and subsequently combined these designs to generate a new, multifunctional machine. The speed of the design and manufacturing process as well as the ease of composing designs create a new paradigm in robotic development, which has the promise to democratize access to customized robots for industrial, home, and educational use.National Science Foundation (U.S.). Expeditions Program (Grant CCF-1138967

A practical multirobot localization system

We present a fast and precise vision-based software intended for multiple robot localization. The core component of the software is a novel and efficient algorithm for black and white pattern detection. The method is robust to variable lighting conditions, achieves sub-pixel precision and its computational complexity is independent of the processed image size. With off-the-shelf computational equipment and low-cost cameras, the core algorithm is able to process hundreds of images per second while tracking hundreds of objects with a millimeter precision. In addition, we present the method's mathematical model, which allows to estimate the expected localization precision, area of coverage, and processing speed from the camera's intrinsic parameters and hardware's processing capacity. The correctness of the presented model and performance of the algorithm in real-world conditions is verified in several experiments. Apart from the method description, we also make its source code public at \emph{http://purl.org/robotics/whycon}; so, it can be used as an enabling technology for various mobile robotic problems

Cooperative strategies for the detection and localization of odorants with robots and artificial noses

En este trabajo de investigación se aborda el diseño de una plataforma robótica orientada a la implementación de estrategias de búsqueda cooperativa bioinspiradas. En particular, tanto el proceso de diseño de la parte electrónica como hardware se han enfocado hacia la validación en entornos reales de algoritmos capaces de afrontar problemas de búsqueda con incertidumbre, como lo es la búsqueda de fuentes de olor que presentan variación espacial y temporal. Este tipo de problemas pueden ser resueltos de forma más eficiente con el empleo de enjambres con una cantidad razonable de robots, y por tanto la plataforma ha sido desarrollada utilizando componentes de bajo coste. Esto ha sido posible por la combinación de elementos estandarizados -como la placa controladora Arduino y otros sensores integrados- con piezas que pueden ser fabricadas mediante una impresora 3D atendiendo a la filosofía del hardware libre (open-source). Entre los requisitos de diseño se encuentran además la eficiencia energética -para maximizar el tiempo de funcionamiento de los robots-, su capacidad de posicionamiento en el entorno de búsqueda, y la integración multisensorial -con la inclusión de una nariz electrónica, sensores de luminosidad, distancia, humedad y temperatura, así como una brújula digital-. También se aborda el uso de una estrategia de comunicación adecuada basada en ZigBee. El sistema desarrollado, denominado GNBot, se ha validado tanto en los aspectos de eficiencia energética como en sus capacidades combinadas de posicionamiento espacial y de detección de fuentes de olor basadas en disoluciones de etanol. La plataforma presentada -formada por el GNBot, su placa electrónica GNBoard y la capa de abstracción software realizada en Python- simplificará por tanto el proceso de implementación y evaluación de diversas estrategias de detección, búsqueda y monitorización de odorantes, con la estandarización de enjambres de robots provistos de narices artificiales y otros sensores multimodales.This research work addresses the design of a robotic platform oriented towards the implementation of bio-inspired cooperative search strategies. In particular, the design processes of both the electronics and hardware have been focused towards the real-world validation of algorithms that are capable of tackling search problems that have uncertainty, such as the search of odor sources that have spatio-temporal variability. These kind of problems can be solved more efficiently with the use of swarms formed by a considerable amount of robots, and thus the proposed platform makes use of low cost components. This has been possible with the combination of standardized elements -as the Arduino controller board and other integrated sensors- with custom parts that can be manufactured with a 3D printer attending to the open-source hardware philosophy. Among the design requirements is the energy efficiency -in order to maximize the working range of the robots-, their positioning capability within the search environment, and multiple sensor integration -with the incorporation of an artificial nose, luminosity, distance, humidity and temperature sensors, as well as an electronic compass-. Another subject that is tackled is the use of an efficient wireless communication strategy based on ZigBee. The developed system, named GNBot, has also been validated in the aspects of energy efficiency and for its combined capabilities for autonomous spatial positioning and detection of ethanol-based odor sources. The presented platform -formed by the GNBot, the GNBoard electronics and the abstraction layer built in Python- will thus simplify the processes of implementation and evaluation of various strategies for the detection, search and monitoring of odorants with conveniently standardized robot swarms provided with artificial noses and other multimodal sensors