723 research outputs found

    Jointly Optimal Channel Pairing and Power Allocation for Multichannel Multihop Relaying

    Full text link
    We study the problem of channel pairing and power allocation in a multichannel multihop relay network to enhance the end-to-end data rate. Both amplify-and-forward (AF) and decode-and-forward (DF) relaying strategies are considered. Given fixed power allocation to the channels, we show that channel pairing over multiple hops can be decomposed into independent pairing problems at each relay, and a sorted-SNR channel pairing strategy is sum-rate optimal, where each relay pairs its incoming and outgoing channels by their SNR order. For the joint optimization of channel pairing and power allocation under both total and individual power constraints, we show that the problem can be decoupled into two subproblems solved separately. This separation principle is established by observing the equivalence between sorting SNRs and sorting channel gains in the jointly optimal solution. It significantly reduces the computational complexity in finding the jointly optimal solution. It follows that the channel pairing problem in joint optimization can be again decomposed into independent pairing problems at each relay based on sorted channel gains. The solution for optimizing power allocation for DF relaying is also provided, as well as an asymptotically optimal solution for AF relaying. Numerical results are provided to demonstrate substantial performance gain of the jointly optimal solution over some suboptimal alternatives. It is also observed that more gain is obtained from optimal channel pairing than optimal power allocation through judiciously exploiting the variation among multiple channels. Impact of the variation of channel gain, the number of channels, and the number of hops on the performance gain is also studied through numerical examples.Comment: 15 pages. IEEE Transactions on Signal Processin

    Jointly Optimal Channel Pairing and Power Allocation for Multichannel Multihop Relaying

    Full text link
    We study the problem of channel pairing and power allocation in a multichannel multihop relay network to enhance the end-to-end data rate. Both amplify-and-forward (AF) and decode-and-forward (DF) relaying strategies are considered. Given fixed power allocation to the channels, we show that channel pairing over multiple hops can be decomposed into independent pairing problems at each relay, and a sorted-SNR channel pairing strategy is sum-rate optimal, where each relay pairs its incoming and outgoing channels by their SNR order. For the joint optimization of channel pairing and power allocation under both total and individual power constraints, we show that the problem can be decoupled into two subproblems solved separately. This separation principle is established by observing the equivalence between sorting SNRs and sorting channel gains in the jointly optimal solution. It significantly reduces the computational complexity in finding the jointly optimal solution. It follows that the channel pairing problem in joint optimization can be again decomposed into independent pairing problems at each relay based on sorted channel gains. The solution for optimizing power allocation for DF relaying is also provided, as well as an asymptotically optimal solution for AF relaying. Numerical results are provided to demonstrate substantial performance gain of the jointly optimal solution over some suboptimal alternatives. It is also observed that more gain is obtained from optimal channel pairing than optimal power allocation through judiciously exploiting the variation among multiple channels. Impact of the variation of channel gain, the number of channels, and the number of hops on the performance gain is also studied through numerical examples.Comment: 15 pages. IEEE Transactions on Signal Processin

    Partner selection in indoor-to-outdoor cooperative networks: an experimental study

    Full text link
    In this paper, we develop a partner selection protocol for enhancing the network lifetime in cooperative wireless networks. The case-study is the cooperative relayed transmission from fixed indoor nodes to a common outdoor access point. A stochastic bivariate model for the spatial distribution of the fading parameters that govern the link performance, namely the Rician K-factor and the path-loss, is proposed and validated by means of real channel measurements. The partner selection protocol is based on the real-time estimation of a function of these fading parameters, i.e., the coding gain. To reduce the complexity of the link quality assessment, a Bayesian approach is proposed that uses the site-specific bivariate model as a-priori information for the coding gain estimation. This link quality estimator allows network lifetime gains almost as if all K-factor values were known. Furthermore, it suits IEEE 802.15.4 compliant networks as it efficiently exploits the information acquired from the receiver signal strength indicator. Extensive numerical results highlight the trade-off between complexity, robustness to model mismatches and network lifetime performance. We show for instance that infrequent updates of the site-specific model through K-factor estimation over a subset of links are sufficient to at least double the network lifetime with respect to existing algorithms based on path loss information only.Comment: This work has been submitted to IEEE Journal on Selected Areas in Communications in August 201

    Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems

    Get PDF
    In wireless broadband communications, orthogonal frequency division multiplexing (OFDM) has been adopted as a promising technique to mitigate multi-path fading and provide high spectral efficiency. In addition, cooperative communication can explore spatial diversity where several users or nodes share their resources and cooperate through distributed transmission. The concatenation of the OFDM technique with relaying systems can enhance the overall performance in terms of spectral efficiency and improve robustness against the detrimental effects of fading. Hybrid relay selection is proposed to overcome the drawbacks of conventional forwarding schemes. However, exciting hybrid relay protocols may suffer some limitations when used for transmission over frequency-selective channels. The combination of cooperative protocols with OFDM systems has been extensively utilized in current wireless networks, and have become a promising solution for future high data rate broadband communication systems including 3D video transmission. This thesis covers two areas of high data rate networks. In the first part, several techniques using cooperative OFDM systems are presented including relay selection, space time block codes, resource allocation and adaptive bit and power allocation to introduce diversity. Four (4) selective OFDM relaying schemes are studied over wireless networks; selective OFDM; selective OFDMA; selective block OFDM and selective unequal block OFDM. The closed-form expression of these schemes is derived. By exploiting the broadcast nature, it is demonstrated that spatial diversity can be improved. The upper bound of outage probability for the protocols is derived. A new strategy for hybrid relay selection is proposed to improve the system performance by removing the sub-carriers that experience deep fading. The per subcarrier basis selection is considered with respect to the predefined threshold signal-to-noise ratio. The closed-form expressions of the proposed protocol in terms of bit error probability and outage probability are derived and compared with conventional hybrid relay selection. Adaptive bit and power allocation is also discussed to improve the system performance. Distributed space frequency coding applied to hybrid relay selection to obtain full spatial and full data rate transmission is explored. Two strategies, single cluster and multiple clusters, are considered for the Alamouti code at the destination by using a hybrid relay protocol. The power allocation with and without sub-carrier pairing is also investigated to mitigate the effect of multipath error propagation in frequency-selective channels. The second part of this thesis investigates the application of cooperative OFDM systems to high data rate transmission. Recently, there has been growing attention paid to 3D video transmission over broadband wireless channels. Two strategies for relay selection hybrid relay selection and first best second best are proposed to implement unequal error protection in the physical layer over error prone channels. The closed-form expressions of bit error probability and outage probability for both strategies are examined. The peak signal-to-noise ratio is presented to show the quality of reconstruction of the left and right views

    Resource Allocation in OFDM-Based Cognitive Two-Way Relay Networks

    Get PDF
    Cognitive radio (CR), nowadays, is considered as one of the most promising techniques which introduce the flexible usage of radio spectrum and improve the spectral efficiency by enabling unlicensed users to exploit the licensed spectrum in an opportunistic manner. Moreover, the two-way relay communication has attracted a great attention as it introduces a relaying scheme with a bidirectional transmission to exchange information between two nodes. This strategy assumed to improve the overall capacity, since less time slots are needed than the one-way strategy, besides extending the radio coverage range of networks. Another common technique that improves the bandwidth efficiency and spectrum utilization is the orthogonal frequency division multiplexing (OFDM) technique which exhibits a distinctive efficiency in mitigating inter-symbol interference (ISI) and combating frequency selective fading. Therefore, two-way relay CR communication among OFDM terminals can take advantage of these three techniques to boost up the capacity together with the networks quality. In this thesis, an OFDM-based amplify and forward (AF), cognitive two-way multiple-relay network is considered where two transceiver nodes exchange information via relay nodes. The full transmission happens in two time slots. In the first time slot, multiple access phase (MA), the transceiver nodes send their signals to the relay nodes while in the second time slot, broadcast phase (BC), the relay nodes broadcast the received signals to the transceivers. In this dissertation, the problem to jointly optimize the network resources is considered. The first is the transmission power of transceivers and relay nodes to ensure suitable allocated power for best signals transmission besides ensuring no harmful interference is caused to the primary system. The other important resource to be optimized is the subcarrier pairing where the first and second time slots subcarriers have to be matched such that the subcarriers with the best conditions is reserved. The final tuned resource, in this work, is the relay selection where the relay node that assures the best transition of the received signal is selected. The dual decomposition technique is applied to get the optimal resource allocation. Moreover, suboptimal algorithms are proposed to perform the resource allocation reducing, significantly, the computational complexity compared with the optimal solution with small performance degradation. Finally, simulation results of the suggested AF OFDM cognitive relaying network are shown to compare the performance gain of the different algorithms which reveals that the proposed suboptimal algorithm achieves good performance with much less computational complexity than the optimal one

    Highly Efficient Resource Allocation Techniques in 5G for NOMA-based Massive MIMO and Relaying Systems

    Get PDF
    The explosive proliferation of smart devices in the 5-th generation (5G) network expects 1,000-fold capacity enhancement, leading to the urgent need of highly resource-efficient technologies. Non-orthogonal multiple access (NOMA), a promising spectral efficient technology for 5G to serve multiple users concurrently, can be combined with massive multiple input multiple output (MIMO) and relaying technology, to achieve highly efficient communications. Hence, this thesis studies the design and resource allocation of NOMA-based massive MIMO and relaying systems. Due to hardware constraints and channel condition variation, the first topic of the thesis develops efficient antenna selection and user scheduling algorithms for sum rate maximization in two MIMO-NOMA scenarios. In the single-band scenario, the proposed algorithm improves antenna search efficiency by limiting the candidate antennas to those are beneficial to the relevant users. In the multi-band scenario, the proposed algorithm selects the antennas and users with the highest contribution total channel gain. Numerical results show that our proposed algorithms achieve similar performance to other algorithms with reduced complexity. The second part of the thesis proposes the relaying and power allocation scheme for the NOMA-assisted relaying system to serve multiple cell-edge users. The relay node decodes its own message from the source NOMA signal and transmits the remaining part of signal to cell-edge users. The power allocation scheme is developed by minimizing the system outage probability. To further evaluate the system performance, the ergodic capacity is approximated by analyzing the interference at cell-edge users. Numerical results proves the performance improvement of the proposed system over conventional orthogonal multiple access mechanism

    Joint Subcarrier Pairing and Power Allocation for OFDM Transmission with Decode-and-Forward Relaying

    Full text link
    In this paper, a point-to-point Orthogonal Frequency Division Multiplexing (OFDM) system with a decode-and-forward (DF) relay is considered. The transmission consists of two hops. The source transmits in the first hop, and the relay transmits in the second hop. Each hop occupies one time slot. The relay is half-duplex, and capable of decoding the message on a particular subcarrier in one time slot, and re-encoding and forwarding it on a different subcarrier in the next time slot. Thus each message is transmitted on a pair of subcarriers in two hops. It is assumed that the destination is capable of combining the signals from the source and the relay pertaining to the same message. The goal is to maximize the weighted sum rate of the system by jointly optimizing subcarrier pairing and power allocation on each subcarrier in each hop. The weighting of the rates is to take into account the fact that different subcarriers may carry signals for different services. Both total and individual power constraints for the source and the relay are investigated. For the situations where the relay does not transmit on some subcarriers because doing so does not improve the weighted sum rate, we further allow the source to transmit new messages on these idle subcarriers. To the best of our knowledge, such a joint optimization inclusive of the destination combining has not been discussed in the literature. The problem is first formulated as a mixed integer programming problem. It is then transformed to a convex optimization problem by continuous relaxation, and solved in the dual domain. Based on the optimization results, algorithms to achieve feasible solutions are also proposed. Simulation results show that the proposed algorithms almost achieve the optimal weighted sum rate, and outperform the existing methods in various channel conditions.Comment: 33 pages, 11 figure
    corecore