Effect of oil palm empty fruit bunches (OPEFB) fibers to the compressive strength and water absorption of concrete

Growing popularity based on environmentally-friendly, low cost and lightweight building materials in the construction industry has led to a need to examine how these characteristics can be achieved and at the same time giving the benefit to the environment and maintain the material requirements based on the standards required. Recycling of waste generated from industrial and agricultural activities as measures of building materials is not only a viable solution to the problem of pollution but also to produce an economic design of building

DyPS: Dynamic Processor Switching for Energy-Aware Video Decoding on Multi-core SoCs

In addition to General Purpose Processors (GPP), Multicore SoCs equipping modern mobile devices contain specialized Digital Signal Processor designed with the aim to provide better performance and low energy consumption properties. However, the experimental measurements we have achieved revealed that system overhead, in case of DSP video decoding, causes drastic performances drop and energy efficiency as compared to the GPP decoding. This paper describes DyPS, a new approach for energy-aware processor switching (GPP or DSP) according to the video quality . We show the pertinence of our solution in the context of adaptive video decoding and describe an implementation on an embedded Linux operating system with the help of the GStreamer framework. A simple case study showed that DyPS achieves 30% energy saving while sustaining the decoding performanc

Distributed video coding in wireless multimedia sensor network for multimedia broadcasting

Recently the development of Distributed Video Coding (DVC) has provided the promising theory support to realize the infrastructure of Wireless Multimedia Sensor Network (WMSN), which composed of autonomous hardware for capturing and transmission of quality audio-visual content. The implementation of DVC in WMSN can better solve the problem of energy constraint of the sensor nodes due to the benefit of lower computational encoder in DVC. In this paper, a practical DVC scheme, pixel-domain Wyner-Ziv(PDWZ) video coding, with slice structure and adaptive rate selection(ARS) is proposed to solve the certain problems when applying DVC into WMSN. Firstly, the proposed slice structure in PDWZ has extended the feasibility of PDWZ to work with any interleaver size used in Slepian-wolf turbo codec for heterogeneous applications. Meanwhile, based on the slice structure, an adaptive code rate selection has been proposed aiming at reduce the system delay occurred in feedback request. The simulation results clearly showed the enhancement in R-D performance and perceptual quality. It also can be observed that system delay caused by frequent feedback is greatly reduced, which gives a promising support for WMSN with low latency and facilitates the QoS management

Analysis and Simulation of the Signals Transmission in the DVB-H/SH Standards

Tato disertační práce se zabývá analýzou, simulací a měřením zpracování a přenosu signálů digitální televize pro příjem mobilního TV vysílání ve standardech DVB-H a DVB-SH. Tyto standardy vycházejí z předpokladu, že příjem signálu je charakterizován modely přenosových kanálů s vícecestným šířením. Tyto, tzv. únikové kanály, jsou charakterizovány hlavně zpožděním a ziskem jednotlivých cest. V závislosti na dalších parametrech (rychlost přijímače, Dopplerovské spektrum), je možné rozdělit únikové kanály do třech hlavních skupin: mobilní, přenosné a fixní. Dá se předpokládat, že v různých modelech kanálů bude přenášený signál různě ovlivněn. Proto je potřebné najít optimální parametry systémů (DVB-H/SH) pro kvalitní příjem vysílaných služeb mobilní televize, což je hlavním cílem této disertační práci. Pro tento účel byly vytvořeny dvě vhodné aplikace (jedna pro DVB-H a jedna pro DVB-SH) s GUI v prostředí MATLAB, které umožňují simulovat a analyzovat míru zkreslení signálu v případě mobilních, přenosných a fixních scénářů přenosu. Navíc, tyto aplikace obsahují i druhý samostatný simulátor pro nastavení a modifikaci parametrů jednotlivých přenosových cest. Díky tomu je možné zhodnotit vliv parametrů celého systému a kanálových modelů na dosaženou chybovost (BER a MER) a kvalitu přenosu. Ve všech přenosových scénářích (v závislosti na poměru C/N) byly získané, vyhodnocené a diskutované zkreslení signálů. Navíc, u standardu DVB-H, všechny získané výsledky ze simulací byly ověřeny měřením. Rozdíly mezi dosaženými výsledky (simulace a měření) byly rovněž podrobeny diskuzi. Tuto disertační práci je možné rozdělit do čtyř hlavních částí. První část disertační práce se zabývá rešerší současného vývoje v oblasti digitálního televizního vysílání na mobilní terminály ve standardech DVB-H/SH. Na konci této části jsou jasně popsány cíle této disertační práce. Druhá část práce je zaměřená na stručný popis blokového diagramu vysílačů v obou standardech DVB-H/SH. Dále jsou stručně popsány modely přenosových kanálů, které se používají pro modelování přenosu signálu. Stručný popis vytvořených aplikací, i s vývojovým diagramem, které jsou vhodné pro simulaci a analýzu přenosu v DVB-H/SH, jsou popsány v třetí části práce. Čtvrtá a nejdelší část této disertační práce se zabývá vyhodnocením získaných výsledků ze simulací a měření.This dissertation thesis deals with the analysis, simulation and measurement of the signal processing and transmission in DVB-H and DVB-SH standards. These standards are based on the assumption that signal reception is characterized by the transmission channels with echoes. These, so called fading channels, are mainly characterized by the path delays and path losses. Depending on the other, additional features (speed of the receiver, Doppler spectrum, etc.), it can be possible divided these channels onto three main groups: mobile, portable and fixed. Of course, signal transmission in different transmission channel models are affected differently. Therefore, it is needed found the optimal system parameters in both, DVB-H and DVB-SH standards, for the quality reception of the broadcasted mobile TV services, which is the main goal of this thesis. For this purpose, two appropriate applications (one for DVB-H and one for DVB-SH) with GUI were created in MATLAB, which enable simulated and analyzed the signal distortions in mobile, portable and fixed transmission scenarios. Moreover, these applications also contain a second application with GUI for the easy set and modification of the parameters of the used channel models. Therefore, it is possible to evaluate the effect of parameters of whole system and channel models on the achieved error rate (BER and MER) and quality of the transmission. In all mentioned transmission scenarios, the signal distortions (depending on the Carrier-to-Noise ratio) were obtained, evaluated and discussed in this dissertation thesis. Furthermore, in case of DVB-H, all obtained results from the simulations, were verified by the measuring. Differences between the obtained results (simulation and measuring) are also discussed. This dissertation thesis can be divided into four main parts. The first part of this dissertation thesis, after the short introduction, deals with present state-of-the-art and literature survey in mobile broadcast DVB-H/SH standards. At the end of this part are clearly outlined the main aims of this dissertation thesis. Second part is focused on the brief description of the functional block diagram of transmitters in both, DVB-H/SH standards. Furthermore, there are briefly described the transmission fading channel models, which are commonly used for the modeling of the signal transmission. The brief description of program applications with flowcharts, appropriate for the simulation of the transmission in the DVB-H/SH standards, are presented and described in the third part of this thesis. Finally, the fourth and longest part of this thesis is focused on the evaluation and comparison of obtained results from the simulations and measurements.

Hardware acceleration architectures for MPEG-Based mobile video platforms: a brief overview

This paper presents a brief overview of past and current hardware acceleration (HwA) approaches that have been proposed for the most computationally intensive compression tools of the MPEG-4 standard. These approaches are classified based on their historical evolution and architectural approach. An analysis of both evolutionary and functional classifications is carried out in order to speculate on the possible trends of the HwA architectures to be employed in mobile video platforms

Band Codes for Energy-Efficient Network Coding with Application to P2P Mobile Streaming

A key problem in random network coding (NC) lies in the complexity and energy consumption associated with the packet decoding processes, which hinder its application in mobile environments. Controlling and hence limiting such factors has always been an important but elusive research goal, since the packet degree distribution, which is the main factor driving the complexity, is altered in a non-deterministic way by the random recombinations at the network nodes. In this paper we tackle this problem proposing Band Codes (BC), a novel class of network codes specifically designed to preserve the packet degree distribution during packet encoding, ecombination and decoding. BC are random codes over GF(2) that exhibit low decoding complexity, feature limited and controlled degree distribution by construction, and hence allow to effectively apply NC even in energy-constrained scenarios. In particular, in this paper we motivate and describe our new design and provide a thorough analysis of its performance. We provide numerical simulations of the performance of BC in order to validate the analysis and assess the overhead of BC with respect to a onventional NC scheme. Moreover, peer-to-peer media streaming experiments with a random-push protocol show that BC reduce the decoding complexity by a factor of two, to a point where NC-based mobile streaming to mobile devices becomes practically feasible.Comment: To be published in IEEE Transacions on Multimedi

Reliable Video Streaming over mmWave with Multi Connectivity and Network Coding

The next generation of multimedia applications will require the telecommunication networks to support a higher bitrate than today, in order to deliver virtual reality and ultra-high quality video content to the users. Most of the video content will be accessed from mobile devices, prompting the provision of very high data rates by next generation (5G) cellular networks. A possible enabler in this regard is communication at mmWave frequencies, given the vast amount of available spectrum that can be allocated to mobile users; however, the harsh propagation environment at such high frequencies makes it hard to provide a reliable service. This paper presents a reliable video streaming architecture for mmWave networks, based on multi connectivity and network coding, and evaluates its performance using a novel combination of the ns-3 mmWave module, real video traces and the network coding library Kodo. The results show that it is indeed possible to reliably stream video over cellular mmWave links, while the combination of multi connectivity and network coding can support high video quality with low latency.Comment: To be presented at the 2018 IEEE International Conference on Computing, Networking and Communications (ICNC), March 2018, Maui, Hawaii, USA (invited paper). 6 pages, 4 figure