TCA<i>m</i>M^CogniGron::Energy Efficient Memristor-Based TCAM for Match-Action Processing

The Internet relies heavily on programmable match-action processors for matching network packets against locally available network rules and taking actions, such as forwarding and modification of network packets. This match-action process must be performed at high speed, i.e., commonly within one clock cycle, using a specialized memory unit called Ternary Content Addressable Memory (TCAM). Building on transistor-based CMOS designs, state-of-the-art TCAM architectures have high energy consumption and lack resilient designs for incorporating novel technologies for performing appropriate actions. In this article, we motivate the use of a novel fundamental component, the ‘Memristor’, for the development of TCAM architecture for match-action processing. Memristors can provide energy efficiency, non-volatility and better resource density as compared to transistors. We have proposed a novel memristor-based TCAM architecture called TCAmMCogniGron, built upon the voltage divider principle and requiring only two memristors and five transistors for storage and search operations compared to sixteen transistors in the traditional TCAM architecture. We analyzed its performance over an experimental data set of Nb-doped SrTiO3-based memristor. The analysis of TCAmMCogniGron showed promising power consumption statistics of 16 uW and 1 uW for match and mismatch operations along with twice the improvement in resources density as compared to the traditional architectures

Z-TCAM: An SRAM-based Architecture for TCAM

published_or_final_versio

Design of High Performance Packet Classification Architecture for Communication Networks

Packet classification is a crucial technique for secure communication and networking. Security tools and internet services use packet classification technique which involves checking of packets against predefined rules stored in a classifier. The performance of the available software solutions of classification is not desirable and efficient for wire speed processing in high speed networks. Ternary Content Addressable Memory (TCAM), Bit-Vector (BV), field split bit vector (FSBV) and StrideBV algorithm are hardware based packet classification algorithms. In this paper, simple and memory efficient approach for packet classification has been proposed using Xnor gate instead of using lookup tables called XnorBV approach. Packet header fields of Internet protocol (IP) addresses and protocol layer are classified using Xnor gate against predefined ruleset which also support ternary bit pattern of ‘1’, ‘0’ and ‘*’ while port numbers of packet header support range match by comparing port numbers against lower bound and upper bound. The proposed parallel pipelined architecture can sustain a high throughput of +100 Gbps and low latency. The proposed method is memory efficient than other existing techniques, also supports prefix, range and exact match without use of range to prefix conversion. Also proposed XnorBV architecture is independent of ruleset feature and supports multiple dimension classification

Low-Power High-Performance Ternary Content Addressable Memory Circuits

Ternary content addressable memories (TCAMs) are hardware-based parallel lookup tables with bit-level masking capability. They are attractive for applications such as packet forwarding and classification in network routers. Despite the attractive features of TCAMs, high power consumption is one of the most critical challenges faced by TCAM designers. This work proposes circuit techniques for reducing TCAM power consumption. The main contribution of this work is divided in two parts: (i) reduction in match line (ML) sensing energy, and (ii) static-power reduction techniques. The ML sensing energy is reduced by employing (i) positive-feedback ML sense amplifiers (MLSAs), (ii) low-capacitance comparison logic, and (iii) low-power ML-segmentation techniques. The positive-feedback MLSAs include both resistive and active feedback to reduce the ML sensing energy. A body-bias technique can further improve the feedback action at the expense of additional area and ML capacitance. The measurement results of the active-feedback MLSA show 50-56% reduction in ML sensing energy. The measurement results of the proposed low-capacitance comparison logic show 25% and 42% reductions in ML sensing energy and time, respectively, which can further be improved by careful layout. The low-power ML-segmentation techniques include dual ML TCAM and charge-shared ML. Simulation results of the dual ML TCAM that connects two sides of the comparison logic to two ML segments for sequential sensing show 43% power savings for a small (4%) trade-off in the search speed. The charge-shared ML scheme achieves power savings by partial recycling of the charge stored in the first ML segment. Chip measurement results show that the charge-shared ML scheme results in 11% and 9% reductions in ML sensing time and energy, respectively, which can be improved to 19-25% by using a digitally controlled charge sharing time-window and a slightly modified MLSA. The static power reduction is achieved by a dual-VDD technique and low-leakage TCAM cells. The dual-VDD technique trades-off the excess noise margin of MLSA for smaller cell leakage by applying a smaller VDD to TCAM cells and a larger VDD to the peripheral circuits. The low-leakage TCAM cells trade off the speed of READ and WRITE operations for smaller cell area and leakage. Finally, design and testing of a complete TCAM chip are presented, and compared with other published designs

AN EFFICIENT LOW-POWER CONTENT- ADDRESSABLE MEMORY USING COMPRESSOR MEMORY BLOCK

In this paper, we proposed a low-power content-addressable memory (CAM) employing a new algorithm for associativity between the input tag and the corresponding address of the output data. The proposed architecture is based on memory block. Given an input data the proposed architecture compares the stored data with input data and send the single matched data address as the output. Therefore, the dynamic energy consumption of the proposed design is significantly lower compared with that of a sparse Clustered network based CAM design. In this project we have shown as the effective error detection and correction in the data set. For detecting and correcting the data this project allows synergetic reuse COMPRESSOR MEMORY BLOCK.   For very high speed searching applications, Bloom filters has been proposed. Associative memory, associative storage and associative array are the synonyms of CAM. For programming in data structures the name associative array is used most. XILINX ISE was used for the simulation process. The search delay of the proposed design is less. So the speed is more as compared to that of SCN CAM design

Towards Energy Efficient Memristor-based TCAM for Match-Action Processing

Match-action processors play a crucial role of communicating end-users in the Internet by computing network paths and enforcing administrator policies. The computation process uses a specialized memory called Ternary Content Addressable Memory (TCAM) to store processing rules and use header information of network packets to perform a match within a single clock cycle. Currently, TCAM memories consume huge amounts of energy resources due to the use of traditional transistor-based CMOS technology. In this article, we motivate the use of a novel component, the memristor, for the development of a TCAM architecture. Memristors can provide energy efficiency, non-volatility, and better resource density as compared to transistors. We have proposed a novel memristor-based TCAM architecture built upon the voltage divider principle for energy efficient match-action processing. Moreover, we have tested the performance of the memristor-based TCAM architecture using the experimental data of a novel Nb-doped SrTiO3 memristor. Energy analysis of the proposed TCAM architecture for given memristor shows promising power consumption statistics of 16 μW for a match operation and 1 μW for a mismatch operation