A Novel Approach For Design Of Pulse Triggered Flip-Flop To Enhance Speed And Power

In VLSI Technology, flip-flops contribute a significant portion of chip area and power consumption to overall system design. Pulse triggered flip-flops (P-FF) have single latch and hence simpler in circuit complexity. Use of Explicit type design for P-FF gives the speed advantage. This paper presents various Pulse triggered Flip-flop (P-FF) designs and various techniques to achieve a better design in terms of power consumption and speed. Introduction of simple pass transistor in latch design can be used to speed up data transition. Dual edge triggering can be adopted as it consumes less power as compared to single edge triggering. Also conditional discharge technique can be used to reduce switching activity. The work is done in tanner tool software. DOI: 10.17762/ijritcc2321-8169.15025

A NEW REDUCED CLOCK POWER FLIP-FLOP FOR FUTURE SOC APPLICATIONS

In this paper a novel technique is proposed based on the comparison between Conventional Conditional Data Mapping Flip-flop and Clock Pair Shared D flip flop(CPSFF) here we are checking the working of CDMFF and the conventional D Flip-flop. Due to the immense growth in nanometer technology the SOC is became the future concept of the modern electronics the number of clock transistors are also considerably increased. In this paper we propose a new system which will considerably reduce the number of transistor which will lead to the reduction in clocking power which will improve the overall power consumption.Our proposed which is designed using Pass Transistor Logic (LCPTFF) Low Power Clocked Pass Transistor Flip-Flop system is showing much better output than all other designs as mentioned in the tabulation.The simulations are done using Microwind& DSCH analysis software tools and the result between all those types are listed below

High Performance Low Power Dual Edge Triggered Static D Flip-Flop

In this paper a low-power double-edge triggered static flip-flop (DETSFF) suitable for low-power and high performance applications is presented. The designed DETFF is verified at gpdk 180nm-1.8V CMOS technology. Comparison with some of the latest DETFFs shows that the proposed DETSFF can achieve the lowest power consumption, lowest clock to Q delay and thus Power-delay-product (PDP). Moreover, the proposed DETSFF comprises of only 15 transistors hence require lesser number of transistors and thus requires lesser overall silicon area.DOI:http://dx.doi.org/10.11591/ijece.v3i5.316

Analysis and Design of Universal Shift Register Using Pulsed Latches

Power utilization and die region space are the significant boundaries which are considered for structuring low level power outcomes. This paper put forward the structure of low force general move register and 4-piece counter utilizing pipe rationale. Since flip failures are an innate structure hinder in a few applications, different flip lemon are over viewed and executed in widespread move register and 4-piece counter. Flip lemon utilizing pipe rationale is viewed as dependent on the correlation of intensity and region. At last, a low force all inclusive move register and 4-piece counter is planned utilizing pipe rationale. The proposed USR and 4-piece counters are mimicked with various clock rate going from 100 KHz to 500MHz. Re-enactment of these flip flounders, the widespread move register and the 4-piece counters are finished utilizing Tanner device at 180nm innovation. The normal force and the PDP of USR are improved by 33% and 27% and further the normal force and the PDP of 4-piece counter are improved by 36.9% and 30.2% when contrasted and existing plan separately. So the put forward plan is reasonable for low level power and elite applications

Clock Gating Flip-Flop using Embedded XoR Circuitry

Flip flops/Pulsed latches are one of the main contributors of dynamic power consumption. In this paper, a novel flip-flop (FF) using clock gating circuitry with embedded XOR, GEMFF, is proposed. Using post layout simulation with 45nm technology, GEMFF outperforms prior state-of-the-art flip-flop by 25.1% at 10% data switching activity in terms of power consumption

Low-Power Redundant-Transition-Free TSPC Dual-Edge-Triggering Flip-Flop Using Single-Transistor-Clocked Buffer

In the modern graphics processing unit (GPU)/artificial intelligence (AI) era, flip-flop (FF) has become one of the most power-hungry blocks in processors. To address this issue, a novel single-phase-clock dual-edge-triggering (DET) FF using a single-transistor-clocked (STC) buffer (STCB) is proposed. The STCB uses a single-clocked transistor in the data sampling path, which completely removes clock redundant transitions (RTs) and internal RTs that exist in other DET designs. Verified by post-layout simulations in 22 nm fully depleted silicon on insulator (FD-SOI) CMOS, when operating at 10% switching activity, the proposed STC-DET outperforms prior state-of-the-art low-power DET in power consumption by 14% and 9.5%, at 0.4 and 0.8 V, respectively. It also achieves the lowest power-delay-product (PDP) among the DETs

High Performance and Low Power VLSI Synchronous Systems Using an Explicit Pulsed Dual Edge Triggered Flip Flops

ABSTRACT: An explicit pulsed dual edge triggered sense amplifier flip flops (DET-FF).In this dual edge triggered sense amplifier flip flop is used for low-power consumption and high performance application. By incorporating the dual edge triggering mechanism, the dual edge triggered flip flop is able to achieve low power consumption that has minimum delay. Clock gating is a popular technique used in many synchronous circuits; hence, the power dissipation is very much reduced. Reducing dynamic power reduction. Clock gating saves power by adding more logic gates in the circuit. It can be used in various applications like digital VLSI clocking system, buffers, registers, microprocessors etc. KEYWORDS: Clock pulse gating,high performance,low power,delay,pulse dual edge triggered, sense amplifier flip flop. I. INTRODUCTION In many digital very large scale integration (VLSI) design, which consists of the clock distribution network and timing elements, is one of the most power consumption. Flip-flops are critical timing elements in digital circuits which have a large impact on circuit speed and power consumption. The performance of the Flip-Flop is an important element to determine the performance of the whole synchronous circuit. In this dual edge triggered sense amplifier as developed from single edge triggered sense amplifier flip flops. At each rising or falling edge of a clock signal, the data stored in a set of flip-flops is readily available so that it can be applied as inputs to other combinational or sequential circuitry. Such flip-flops that store data on both the leading edge and the trailing edge of a clock pulse are referred to as double-edge triggered flip-flops otherwise it is called as single edge triggered flip-flops. The dual edge triggering is a very important technique is to reduce the power consumption in the clock distribution network. In this dual edge triggering is to introduce the clock gating. In this clock gating with clock storage element is to reduce the dynamic power. Two types of clock gating are used in the dual edge triggering mechanism. These are latch free clock gating and latch based clock gating. When technology scales down, total power dissipation will decrease and at the same time delay varies depends upon supply voltage, threshold voltage, oxide thickness. II.DUAL EDGE TRIGGERED FLIP FLOP The dual edge triggered flip flops have two stages. These are pulse generator stage and latching stage. If the clock pulse as the input of the pulse generator. It produces the triggering pulse signal. Latching stage as generate the output pulse signal. In this dual edge triggering flip flop used two types of clock gating. These are latch based clock gating and latch free clock gating. The general block is shown i

Power Reductions with Energy Recovery Using Resonant Topologies

The problem of power densities in system-on-chips (SoCs) and processors has become more exacerbated recently, resulting in high cooling costs and reliability issues. One of the largest components of power consumption is the low skew clock distribution network (CDN), driving large load capacitance. This can consume as much as 70% of the total dynamic power that is lost as heat, needing elaborate sensing and cooling mechanisms. To mitigate this, resonant clocking has been utilized in several applications over the past decade. An improved energy recovering reconfigurable generalized series resonance (GSR) solution with all the critical support circuitry is developed in this work. This LC resonant clock driver is shown to save about 50% driver power (\u3e40% overall), on a 22nm process node and has 50% less skew than a non-resonant driver at 2GHz. It can operate down to 0.2GHz to support other energy savings techniques like dynamic voltage and frequency scaling (DVFS). As an example, GSR can be configured for the simpler pulse series resonance (PSR) operation to enable further power saving for double data rate (DDR) applications, by using de-skewing latches instead of flip-flop banks. A PSR based subsystem for 40% savings in clocking power with 40% driver active area reduction xii is demonstrated. This new resonant driver generates tracking pulses at each transition of clock for dual edge operation across DVFS. PSR clocking is designed to drive explicit-pulsed latches with negative setup time. Simulations using 45nm IBM/PTM device and interconnect technology models, clocking 1024 flip-flops show the reductions, compared to non-resonant clocking. DVFS range from 2GHz/1.3V to 200MHz/0.5V is obtained. The PSR frequency is set \u3e3× the clock rate, needing only 1/10th the inductance of prior-art LC resonance schemes. The skew reductions are achieved without needing to increase the interconnect widths owing to negative set-up times. Applications in data circuits are shown as well with a 90nm example. Parallel resonant and split-driver non-resonant configurations as well are derived from GSR. Tradeoffs in timing performance versus power, based on theoretical analysis, are compared for the first time and verified. This enables synthesis of an optimal topology for a given application from the GSR

Low power VLSI design of a fir filter using dual edge triggered clocking strategy

Digital signal processing is an area of science and engineering that has developed rapidly over the past 30 years. This rapid development is a result of the significant advances in digital computer technology and integrated–circuit fabrication. DSP processors are a diverse group, most share some common features designed to support fast execution of the repetitive, numerically intensive computations characteristic of digital signal processing algorithms. The most often cited of these features is the ability to perform a multiply-accumulate operation (often called a "MAC") in a single instruction cycle. Hence in this project a DSP Processor is designed which can perform the basic DSP Operations like convolution, fourier transform and filtering. The processor designed is a simple 4-bit processor which has single data line of 8-bits and a single address bus of 16-bits. With a set of branch instructions the project DSP will operate as a CISC processor with strong math capabilities and can perform the above mentioned DSP operations. The application I have taken is the low power FIR filter using dual edge clocking strategy. It combines two novel techniques for the power reduction which is : multi stage clock gating and a symmetric two-phase level-sensitive clocking with glitch aware re-distribution of data-path registers. Simulation results confirm a 42% reduction in power over single edge triggered clocking with clock gating.Also to further reduce the power consumption the a low power latch circuit is used. Thanks to a partial pass-transistor logic, it trades time for energy, being particularly suitable for low power low-frequency applications. Simulation results confirm the power reduction. This technique discussed can be implemented to portable devices which needs longer battery life and to ASIC’

Introduction to Logic Circuits & Logic Design with VHDL

The overall goal of this book is to fill a void that has appeared in the instruction of digital circuits over the past decade due to the rapid abstraction of system design. Up until the mid-1980s, digital circuits were designed using classical techniques. Classical techniques relied heavily on manual design practices for the synthesis, minimization, and interfacing of digital systems. Corresponding to this design style, academic textbooks were developed that taught classical digital design techniques. Around 1990, large-scale digital systems began being designed using hardware description languages (HDL) and automated synthesis tools. Broad-scale adoption of this modern design approach spread through the industry during this decade. Around 2000, hardware description languages and the modern digital design approach began to be taught in universities, mainly at the senior and graduate level. There were a variety of reasons that the modern digital design approach did not penetrate the lower levels of academia during this time. First, the design and simulation tools were difficult to use and overwhelmed freshman and sophomore students. Second, the ability to implement the designs in a laboratory setting was infeasible. The modern design tools at the time were targeted at custom integrated circuits, which are cost- and time-prohibitive to implement in a university setting. Between 2000 and 2005, rapid advances in programmable logic and design tools allowed the modern digital design approach to be implemented in a university setting, even in lower-level courses. This allowed students to learn the modern design approach based on HDLs and prototype their designs in real hardware, mainly field programmable gate arrays (FPGAs). This spurred an abundance of textbooks to be authored teaching hardware description languages and higher levels of design abstraction. This trend has continued until today. While abstraction is a critical tool for engineering design, the rapid movement toward teaching only the modern digital design techniques has left a void for freshman- and sophomore-level courses in digital circuitry. Legacy textbooks that teach the classical design approach are outdated and do not contain sufficient coverage of HDLs to prepare the students for follow-on classes. Newer textbooks that teach the modern digital design approach move immediately into high-level behavioral modeling with minimal or no coverage of the underlying hardware used to implement the systems. As a result, students are not being provided the resources to understand the fundamental hardware theory that lies beneath the modern abstraction such as interfacing, gate-level implementation, and technology optimization. Students moving too rapidly into high levels of abstraction have little understanding of what is going on when they click the “compile and synthesize” button of their design tool. This leads to graduates who can model a breadth of different systems in an HDL but have no depth into how the system is implemented in hardware. This becomes problematic when an issue arises in a real design and there is no foundational knowledge for the students to fall back on in order to debug the problem