Testing of Asynchronous NULL Conventional Logic (NCL) Circuits

Due to the absence of a global clock and presence of more state holding elements that synchronize the control and data paths, conventional automatic test pattern generation (ATPG) algorithms would fail when applied to asynchronous circuits, leading to poor fault coverage. This paper focuses on design for test (DFT) techniques aimed at making asynchronous NCL designs testable using existing DFT CAD tools with reasonable gate overhead, by enhancing controllability of feedback nets and observability for fault sites that are flagged unobservable. The proposed approach performs scan and test points insertion on NCL designs using custom ATPG library. The approach has been automated, which is essential for large systems; and are fully compatible with industry standard tools

Testing micropipelines

Journal ArticleMicropipelines, self-timed event-driven pipelines, are an attractive way of structuring asynchronous systems that exhibit many of the advantages of general asynchronous systems, but enough structure to make the design of significant systems practical. As with any design method, testing is critical. We present a technique for testing self-timed micropipelines for stuck-at faults and for delay faults an the bundled data paths by modifying the latch and control elements to include a built-in scan path for testing. This scan path allows the processing logic in the micropipeline, to be fully tested with only a small overhead in the latch and control circuits. The test method is very similar to scan testing in synchronous systems, but the micropipeline retains its self-timed behavior during normal operation

DFT Techniques and Automation for Asynchronous NULL Conventional Logic Circuits

Conventional automatic test pattern generation (ATPG) algorithms fail when applied to asynchronous NULL convention logic (NCL) circuits due to the absence of a global clock and presence of more state-holding elements, leading to poor fault coverage. This paper presents a design-for-test (DFT) approach aimed at making asynchronous NCL designs testable using conventional ATPG programs. We propose an automatic DFT insertion flow (ADIF) methodology that performs scan and test point insertion on NCL designs to improve test coverage, using a custom ATPG library. Experimental results show significant increase in fault coverage for NCL cyclic and acyclic pipelined designs

Analysis and Optimization for Pipelined Asynchronous Systems

Most microelectronic chips used today--in systems ranging from cell phones to desktop computers to supercomputers--operate in basically the same way: they synchronize the operation of their millions of internal components using a clock that is distributed globally. This global clocking is becoming a critical design challenge in the quest for building chips that offer increasingly greater functionality, higher speed, and better energy efficiency. As an alternative, asynchronous or clockless design obviates the need for global synchronization; instead, components operate concurrently and synchronize locally only when necessary. This dissertation focuses on one class of asynchronous circuits: application specific stream processing systems (i.e. those that take in a stream of data items and produce a stream of processed results.) High-speed stream processors are a natural match for many high-end applications, including 3D graphics rendering, image and video processing, digital filters and DSPs, cryptography, and networking processors. This dissertation aims to make the design, analysis, optimization, and testing of circuits in the chosen domain both fast and efficient. Although much of the groundwork has already been laid by years of past work, my work identifies and addresses four critical missing pieces: i) fast performance analysis for estimating the throughput of a fine-grained pipelined system; ii) automated and versatile design space exploration; iii) a full suite of circuit level modules that connect together to implement a wide variety of system behaviors; and iv) testing and design for testability techniques that identify and target the types of errors found only in high-speed pipelined asynchronous systems. I demonstrate these techniques on a number of examples, ranging from simple applications that allow for easy comparison to hand-designed alternatives to more complex systems, such as a JPEG encoder. I also demonstrate these techniques through the design and test of a fully asynchronous GCD demonstration chip

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Built-In Self-Test (BIST) for Multi-Threshold NULL Convention Logic (MTNCL) Circuits

This dissertation proposes a Built-In Self-Test (BIST) hardware implementation for Multi-Threshold NULL Convention Logic (MTNCL) circuits. Two different methods are proposed: an area-optimized topology that requires minimal area overhead, and a test-performance-optimized topology that utilizes parallelism and internal hardware to reduce the overall test time through additional controllability points. Furthermore, an automated software flow is proposed to insert, simulate, and analyze an input MTNCL netlist to obtain a desired fault coverage, if possible, through iterative digital and fault simulations. The proposed automated flow is capable of producing both area-optimized and test-performance-optimized BIST circuits and scripts for digital and fault simulation using commercial software that may be utilized to manually verify or adjust further, if desired

Design of Asynchronous Circuits for High Soft Error Tolerance in Deep Submicron CMOS Circuits

As the devices are scaling down, the combinational logic will become susceptible to soft errors. The conventional soft error tolerant methods for soft errors on combinational logic do not provide enough high soft error tolerant capability with reasonably small performance penalty. This paper investigates the feasibility of designing quasi-delay insensitive (QDI) asynchronous circuits for high soft error tolerance. We analyze the behavior of null convention logic (NCL) circuits in the presence of particle strikes, and propose an asynchronous pipeline for soft-error correction and a novel technique to improve the robustness of threshold gates, which are basic components in NCL, against particle strikes by using Schmitt trigger circuit and resizing the feedback transistor. Experimental results show that the proposed threshold gates do not generate soft errors under the strike of a particle within a certain energy range if a proper transistor size is applied. The penalties, such as delay and power consumption, are also presented

Methodologies and Toolflows for the Predictable Design of Reliable and Low-Power NoCs

There is today the unmistakable need to evolve design methodologies and tool ows for Network-on-Chip based embedded systems. In particular, the quest for low-power requirements is nowadays a more-than-ever urgent dilemma. Modern circuits feature billion of transistors, and neither power management techniques nor batteries capacity are able to endure the increasingly higher integration capability of digital devices. Besides, power concerns come together with modern nanoscale silicon technology design issues. On one hand, system failure rates are expected to increase exponentially at every technology node when integrated circuit wear-out failure mechanisms are not compensated for. However, error detection and/or correction mechanisms have a non-negligible impact on the network power. On the other hand, to meet the stringent time-to-market deadlines, the design cycle of such a distributed and heterogeneous architecture must not be prolonged by unnecessary design iterations. Overall, there is a clear need to better discriminate reliability strategies and interconnect topology solutions upfront, by ranking designs based on power metric. In this thesis, we tackle this challenge by proposing power-aware design technologies. Finally, we take into account the most aggressive and disruptive methodology for embedded systems with ultra-low power constraints, by migrating NoC basic building blocks to asynchronous (or clockless) design style. We deal with this challenge delivering a standard cell design methodology and mainstream CAD tool ows, in this way partially relaxing the requirement of using asynchronous blocks only as hard macros

Design and performance optimization of asynchronous networks-on-chip

As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems. In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style. The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions. First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains. Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow. Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel. In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement