Endpoint-transparent Multipath Transport with Software-defined Networks

Multipath forwarding consists of using multiple paths simultaneously to transport data over the network. While most such techniques require endpoint modifications, we investigate how multipath forwarding can be done inside the network, transparently to endpoint hosts. With such a network-centric approach, packet reordering becomes a critical issue as it may cause critical performance degradation. We present a Software Defined Network architecture which automatically sets up multipath forwarding, including solutions for reordering and performance improvement, both at the sending side through multipath scheduling algorithms, and the receiver side, by resequencing out-of-order packets in a dedicated in-network buffer. We implemented a prototype with commonly available technology and evaluated it in both emulated and real networks. Our results show consistent throughput improvements, thanks to the use of aggregated path capacity. We give comparisons to Multipath TCP, where we show our approach can achieve a similar performance while offering the advantage of endpoint transparency

Low-Latency Scheduling in MPTCP

The demand for mobile communication is continuously increasing, and mobile devices are now the communication device of choice for many people. To guarantee connectivity and performance, mobile devices are typically equipped with multiple interfaces. To this end, exploiting multiple available interfaces is also a crucial aspect of the upcoming 5G standard for reducing costs, easing network management, and providing a good user experience. Multi-path protocols, such as multi-path TCP (MPTCP), can be used to provide performance optimization through load-balancing and resilience to coverage drops and link failures, however, they do not automatically guarantee better performance. For instance, low-latency communication has been proven hard to achieve when a device has network interfaces with asymmetric capacity and delay (e.g., LTE and WLAN). For multi-path communication, the data scheduler is vital to provide low latency, since it decides over which network interface to send individual data segments. In this paper, we focus on the MPTCP scheduler with the goal of providing a good user experience for latency-sensitive applications when interface quality is asymmetric. After an initial assessment of existing scheduling algorithms, we present two novel scheduling techniques: the block estimation (BLEST) scheduler and the shortest transmission time first (STTF) scheduler. BLEST and STTF are compared with existing schedulers in both emulated and real-world environments and are shown to reduce web object transmission times with up to 51% and provide 45% faster communication for interactive applications, compared with MPTCP's default scheduler

End-to-End Simulation of 5G mmWave Networks

Due to its potential for multi-gigabit and low latency wireless links, millimeter wave (mmWave) technology is expected to play a central role in 5th generation cellular systems. While there has been considerable progress in understanding the mmWave physical layer, innovations will be required at all layers of the protocol stack, in both the access and the core network. Discrete-event network simulation is essential for end-to-end, cross-layer research and development. This paper provides a tutorial on a recently developed full-stack mmWave module integrated into the widely used open-source ns--3 simulator. The module includes a number of detailed statistical channel models as well as the ability to incorporate real measurements or ray-tracing data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and highly customizable, making it easy to integrate algorithms or compare Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example. The module is interfaced with the core network of the ns--3 Long Term Evolution (LTE) module for full-stack simulations of end-to-end connectivity, and advanced architectural features, such as dual-connectivity, are also available. To facilitate the understanding of the module, and verify its correct functioning, we provide several examples that show the performance of the custom mmWave stack as well as custom congestion control algorithms designed specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and Tutorials (revised Jan. 2018

Fixed-Mobile Convergence in the 5G era: From Hybrid Access to Converged Core

The availability of different paths to communicate to a user or device introduces several benefits, from boosting enduser performance to improving network utilization. Hybrid access is a first step in enabling convergence of mobile and fixed networks, however, despite traffic optimization, this approach is limited as fixed and mobile are still two separate core networks inter-connected through an aggregation point. On the road to 5G networks, the design trend is moving towards an aggregated network, where different access technologies share a common anchor point in the core. This enables further network optimization in addition to hybrid access, examples are userspecific policies for aggregation and improved traffic balancing across different accesses according to user, network, and service context. This paper aims to discuss the ongoing work around hybrid access and network convergence by Broadband Forum and 3GPP. We present some testbed results on hybrid access and analyze some primary performance indicators such as achievable data rates, link utilization for aggregated traffic and session setup latency. We finally discuss the future directions for network convergence to enable future scenarios with enhanced configuration capabilities for fixed and mobile convergence.Comment: to appear in IEEE Networ

A Survey on Congestion Control and Scheduling for Multipath TCP: Machine Learning vs Classical Approaches

Multipath TCP (MPTCP) has been widely used as an efficient way for communication in many applications. Data centers, smartphones, and network operators use MPTCP to balance the traffic in a network efficiently. MPTCP is an extension of TCP (Transmission Control Protocol), which provides multiple paths, leading to higher throughput and low latency. Although MPTCP has shown better performance than TCP in many applications, it has its own challenges. The network can become congested due to heavy traffic in the multiple paths (subflows) if the subflow rates are not determined correctly. Moreover, communication latency can occur if the packets are not scheduled correctly between the subflows. This paper reviews techniques to solve the above-mentioned problems based on two main approaches; non data-driven (classical) and data-driven (Machine Learning) approaches. This paper compares these two approaches and highlights their strengths and weaknesses with a view to motivating future researchers in this exciting area of machine learning for communications. This paper also provides details on the simulation of MPTCP and its implementations in real environments.Comment: 13 pages, 7 figure

Systems and Methods for Measuring and Improving End-User Application Performance on Mobile Devices

In today's rapidly growing smartphone society, the time users are spending on their smartphones is continuing to grow and mobile applications are becoming the primary medium for providing services and content to users. With such fast paced growth in smart-phone usage, cellular carriers and internet service providers continuously upgrade their infrastructure to the latest technologies and expand their capacities to improve the performance and reliability of their network and to satisfy exploding user demand for mobile data. On the other side of the spectrum, content providers and e-commerce companies adopt the latest protocols and techniques to provide smooth and feature-rich user experiences on their applications. To ensure a good quality of experience, monitoring how applications perform on users' devices is necessary. Often, network and content providers lack such visibility into the end-user application performance. In this dissertation, we demonstrate that having visibility into the end-user perceived performance, through system design for efficient and coordinated active and passive measurements of end-user application and network performance, is crucial for detecting, diagnosing, and addressing performance problems on mobile devices. My dissertation consists of three projects to support this statement. First, to provide such continuous monitoring on smartphones with constrained resources that operate in such a highly dynamic mobile environment, we devise efficient, adaptive, and coordinated systems, as a platform, for active and passive measurements of end-user performance. Second, using this platform and other passive data collection techniques, we conduct an in-depth user trial of mobile multipath to understand how Multipath TCP (MPTCP) performs in practice. Our measurement study reveals several limitations of MPTCP. Based on the insights gained from our measurement study, we propose two different schemes to address the identified limitations of MPTCP. Last, we show how to provide visibility into the end- user application performance for internet providers and in particular home WiFi routers by passively monitoring users' traffic and utilizing per-app models mapping various network quality of service (QoS) metrics to the application performance.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146014/1/ashnik_1.pd