レイテンシ耐性を持つベクトルプロセッサアーキテクチャに関する研究

Tohoku University博士（情報科学）thesi

Intelligent Scheduling and Memory Management Techniques for Modern GPU Architectures

abstract: With the massive multithreading execution feature, graphics processing units (GPUs) have been widely deployed to accelerate general-purpose parallel workloads (GPGPUs). However, using GPUs to accelerate computation does not always gain good performance improvement. This is mainly due to three inefficiencies in modern GPU and system architectures. First, not all parallel threads have a uniform amount of workload to fully utilize GPU’s computation ability, leading to a sub-optimal performance problem, called warp criticality. To mitigate the degree of warp criticality, I propose a Criticality-Aware Warp Acceleration mechanism, called CAWA. CAWA predicts and accelerates the critical warp execution by allocating larger execution time slices and additional cache resources to the critical warp. The evaluation result shows that with CAWA, GPUs can achieve an average of 1.23x speedup. Second, the shared cache storage in GPUs is often insufficient to accommodate demands of the large number of concurrent threads. As a result, cache thrashing is commonly experienced in GPU’s cache memories, particularly in the L1 data caches. To alleviate the cache contention and thrashing problem, I develop an instruction aware Control Loop Based Adaptive Bypassing algorithm, called Ctrl-C. Ctrl-C learns the cache reuse behavior and bypasses a portion of memory requests with the help of feedback control loops. The evaluation result shows that Ctrl-C can effectively improve cache utilization in GPUs and achieve an average of 1.42x speedup for cache sensitive GPGPU workloads. Finally, GPU workloads and the co-located processes running on the host chip multiprocessor (CMP) in a heterogeneous system setup can contend for memory resources in multiple levels, resulting in significant performance degradation. To maximize the system throughput and balance the performance degradation of all co-located applications, I design a scalable performance degradation predictor specifically for heterogeneous systems, called HeteroPDP. HeteroPDP predicts the application execution time and schedules OpenCL workloads to run on different devices based on the optimization goal. The evaluation result shows HeteroPDP can improve the system fairness from 24% to 65% when an OpenCL application is co-located with other processes, and gain an additional 50% speedup compared with always offloading the OpenCL workload to GPUs. In summary, this dissertation aims to provide insights for the future microarchitecture and system architecture designs by identifying, analyzing, and addressing three critical performance problems in modern GPUs.Dissertation/ThesisDoctoral Dissertation Computer Engineering 201

Feasibility study for a numerical aerodynamic simulation facility. Volume 1

A Numerical Aerodynamic Simulation Facility (NASF) was designed for the simulation of fluid flow around three-dimensional bodies, both in wind tunnel environments and in free space. The application of numerical simulation to this field of endeavor promised to yield economies in aerodynamic and aircraft body designs. A model for a NASF/FMP (Flow Model Processor) ensemble using a possible approach to meeting NASF goals is presented. The computer hardware and software are presented, along with the entire design and performance analysis and evaluation

A SIMD architecture for hard real-time systems

Emerging safety-critical systems require high-performance data-parallel architectures and, problematically, ones that can guarantee tight and safe worst-case execution times. Given the complexity of existing architectures like GPUs, it is unlikely that sufficiently accurate models and algorithms for timing analysis will emerge in the foreseeable future. This motivates a clean-slate approach to designing a real-time data-parallel architecture. In this work I present Sim-D: a wide-SIMD architecture for hard real-time systems. Similar to GPUs, Sim-D performs hardware strip-mining to schedule the work for a compute kernel in entities called work-groups. Sim-D schedules the work for each work-group as a sequence of uninterruptible access- and execute program phases, interleaving the phases of two work-groups. By providing performance isolation between the memory- and compute resources, the execution time of each phase can be tightly bound through static analysis. I present a predictable closed-page DRAM controller that processes requests for large 1D- and 2D blocks of data, as well as indirect indexed transfers. These large transfers coalesce the data requests of a whole work-group. For a linear 4KiB transfer over a 64-bit data bus, the utilisation provably exceeds 78% for DDR4-3200AA DRAM. For 2D blocks, a well-chosen tiling configuration can achieve near-similar efficiency. I show that bounds on the execution time of indexed transfers are pessimistic by nature, but propose a novel snoopy indexed transfer mechanism that permits more reasonable bounds when the buffer size is limited. Finally, I present a worst-case execution time calculation algorithm for Sim-D. This algorithm is paired with two hardware work-group scheduling policies that deterministically reduce run-time variance. The worst-case execution time analysis algorithm combines static control flow analysis with a simulation-based cost model for execution and DRAM transfers. Its key novelty is the addition of a stage that considers work-group scheduling effects. I show that the work-group scheduling policies degrade performance on average by 8.9%, but permit the calculation of worst-case execution time bounds that are tight within 14.3% on average for benchmarks that avoid inefficient indexed transfers

A RECONFIGURABLE AND EXTENSIBLE EXPLORATION PLATFORM FOR FUTURE HETEROGENEOUS SYSTEMS

Accelerator-based -or heterogeneous- computing has become increasingly important in a variety of scenarios, ranging from High-Performance Computing (HPC) to embedded systems. While most solutions use sometimes custom-made components, most of today’s systems rely on commodity highend CPUs and/or GPU devices, which deliver adequate performance while ensuring programmability, productivity, and application portability. Unfortunately, pure general-purpose hardware is affected by inherently limited power-efficiency, that is, low GFLOPS-per-Watt, now considered as a primary metric. The many-core model and architectural customization can play here a key role, as they enable unprecedented levels of power-efficiency compared to CPUs/GPUs. However, such paradigms are still immature and deeper exploration is indispensable. This dissertation investigates customizability and proposes novel solutions for heterogeneous architectures, focusing on mechanisms related to coherence and network-on-chip (NoC). First, the work presents a non-coherent scratchpad memory with a configurable bank remapping system to reduce bank conflicts. The experimental results show the benefits of both using a customizable hardware bank remapping function and non-coherent memories for some types of algorithms. Next, we demonstrate how a distributed synchronization master better suits many-cores than standard centralized solutions. This solution, inspired by the directory-based coherence mechanism, supports concurrent synchronizations without relying on memory transactions. The results collected for different NoC sizes provided indications about the area overheads incurred by our solution and demonstrated the benefits of using a dedicated hardware synchronization support. Finally, this dissertation proposes an advanced coherence subsystem, based on the sparse directory approach, with a selective coherence maintenance system which allows coherence to be deactivated for blocks that do not require it. Experimental results show that the use of a hybrid coherent and non-coherent architectural mechanism along with an extended coherence protocol can enhance performance. The above results were all collected by means of a modular and customizable heterogeneous many-core system developed to support the exploration of power-efficient high-performance computing architectures. The system is based on a NoC and a customizable GPU-like accelerator core, as well as a reconfigurable coherence subsystem, ensuring application-specific configuration capabilities. All the explored solutions were evaluated on this real heterogeneous system, which comes along with the above methodological results as part of the contribution in this dissertation. In fact, as a key benefit, the experimental platform enables users to integrate novel hardware/software solutions on a full-system scale, whereas existing platforms do not always support a comprehensive heterogeneous architecture exploration

Empirically Tuning HPC Kernels with iFKO

iFKO (iterative Floating point Kernel Optimizer) is an open-source iterative empirical compilation framework which can be used to tune high performance computing (HPC) kernels. The goal of our research is to advance iterative empirical compilation to the degree that the performance it can achieve is comparable to that delivered by painstaking hand tuning in assembly. This will allow many HPC researchers to spend precious development time on higher level aspects of tuning such as parallelization, as well as enabling computational scientists to develop new algorithms that demand new high performance kernels. At present, algorithms that cannot use hand-tuned performance libraries tend to lose to even inferior algorithms that can. We discuss our new autovectorization technique (speculative vectorization) which can autovectorize loops past dependent branches by speculating along frequently taken paths, even when other paths cannot be effectively vectorized. We implemented this technique in iFKO and demonstrated significant speedup for kernels that prior vectorization techniques could not optimize. We have developed an optimization for two dimensional array indexing that is critical for allowing us to heavily unroll and jam loops without restriction from integer register pressure. We then extended the state of the art single basic block vectorization method, SLP, to vectorize nested loops. We have also introduced optimized reductions that can retain full SIMD parallelization for the entire reduction, as well as doing loop specialization and unswitching as needed to address vector alignment issues and paths inside the loops which inhibit autovectorization. We have also implemented a critical transformation for optimal vectorization of mixed-type data. Combining all these techniques we can now fully vectorize the loopnests for our most complicated kernels, allowing us to achieve performance very close to that of hand-tuned assembly

Runtime-assisted optimizations in the on-chip memory hierarchy

Following Moore's Law, the number of transistors on chip has been increasing exponentially, which has led to the increasing complexity of modern processors. As a result, the efficient programming of such systems has become more difficult. Many programming models have been developed to answer this issue. Of particular interest are task-based programming models that employ simple annotations to define parallel work in an application. The information available at the level of the runtime systems associated with these programming models offers great potential for improving hardware design. Moreover, due to technological limitations, Moore's Law is predicted to eventually come to an end, so novel paradigms are necessary to maintain the current performance improvement trends. The main goal of this thesis is to exploit the knowledge about a parallel application available at the runtime system level to improve the design of the on-chip memory hierarchy. The coupling of the runtime system and the microprocessor enables a better hardware design without hurting the programmability. The first contribution is a set of insertion policies for shared last-level caches that exploit information about tasks and task data dependencies. The intuition behind this proposal revolves around the observation that parallel threads exhibit different memory access patterns. Even within the same thread, accesses to different variables often follow distinct patterns. The proposed policies insert cache lines into different logical positions depending on the dependency type and task type to which the corresponding memory request belongs. The second proposal optimizes the execution of reductions, defined as a programming pattern that combines input data to form the resulting reduction variable. This is achieved with a runtime-assisted technique for performing reductions in the processor's cache hierarchy. The proposal's goal is to be a universally applicable solution regardless of the reduction variable type, size and access pattern. On the software level, the programming model is extended to let a programmer specify the reduction variables for tasks, as well as the desired cache level where a certain reduction will be performed. The source-to-source compiler and the runtime system are extended to translate and forward this information to the underlying hardware. On the hardware level, private and shared caches are equipped with functional units and the accompanying logic to perform reductions at the cache level. This design avoids unnecessary data movements to the core and back as the data is operated at the place where it resides. The third contribution is a runtime-assisted prioritization scheme for memory requests inside the on-chip memory hierarchy. The proposal is based on the notion of a critical path in the context of parallel codes and a known fact that accelerating critical tasks reduces the execution time of the whole application. In the context of this work, task criticality is observed at a level of a task type as it enables simple annotation by the programmer. The acceleration of critical tasks is achieved by the prioritization of corresponding memory requests in the microprocessor.Siguiendo la ley de Moore, el número de transistores en los chips ha crecido exponencialmente, lo que ha comportado una mayor complejidad en los procesadores modernos y, como resultado, de la dificultad de la programación eficiente de estos sistemas. Se han desarrollado muchos modelos de programación para resolver este problema; un ejemplo particular son los modelos de programación basados en tareas, que emplean anotaciones sencillas para definir los Trabajos paralelos de una aplicación. La información de que disponen los sistemas en tiempo de ejecución (runtime systems) asociada con estos modelos de programación ofrece un enorme potencial para la mejora del diseño del hardware. Por otro lado, las limitaciones tecnológicas hacen que la ley de Moore pueda dejar de cumplirse próximamente, por lo que se necesitan paradigmas nuevos para mantener las tendencias actuales de mejora de rendimiento. El objetivo principal de esta tesis es aprovechar el conocimiento de las aplicaciones paral·leles de que dispone el runtime system para mejorar el diseño de la jerarquía de memoria del chip. El acoplamiento del runtime system junto con el microprocesador permite realizar mejores diseños hardware sin afectar Negativamente en la programabilidad de dichos sistemas. La primera contribución de esta tesis consiste en un conjunto de políticas de inserción para las memorias caché compartidas de último nivel que aprovecha la información de las tareas y las dependencias de datos entre estas. La intuición tras esta propuesta se basa en la observación de que los hilos de ejecución paralelos muestran distintos patrones de acceso a memoria e, incluso dentro del mismo hilo, los accesos a diferentes variables a menudo siguen patrones distintos. Las políticas que se proponen insertan líneas de caché en posiciones lógicas diferentes en función de los tipos de dependencia y tarea a los que corresponde la petición de memoria. La segunda propuesta optimiza la ejecución de las reducciones, que se definen como un patrón de programación que combina datos de entrada para conseguir la variable de reducción como resultado. Esto se consigue mediante una técnica asistida por el runtime system para la realización de reducciones en la jerarquía de la caché del procesador, con el objetivo de ser una solución aplicable de forma universal sin depender del tipo de la variable de la reducción, su tamaño o el patrón de acceso. A nivel de software, el modelo de programación se extiende para que el programador especifique las variables de reducción de las tareas, así como el nivel de caché escogido para que se realice una determinada reducción. El compilador fuente a Fuente (compilador source-to-source) y el runtime ssytem se modifican para que traduzcan y pasen esta información al hardware subyacente, evitando así movimientos de datos innecesarios hacia y desde el núcleo del procesador, al realizarse la operación donde se encuentran los datos de la misma. La tercera contribución proporciona un esquema de priorización asistido por el runtime system para peticiones de memoria dentro de la jerarquía de memoria del chip. La propuesta se basa en la noción de camino crítico en el contexto de los códigos paralelos y en el hecho conocido de que acelerar tareas críticas reduce el tiempo de ejecución de la aplicación completa. En el contexto de este trabajo, la criticidad de las tareas se considera a nivel del tipo de tarea ya que permite que el programador las indique mediante anotaciones sencillas. La aceleración de las tareas críticas se consigue priorizando las correspondientes peticiones de memoria en el microprocesador.Seguint la llei de Moore, el nombre de transistors que contenen els xips ha patit un creixement exponencial, fet que ha provocat un augment de la complexitat dels processadors moderns i, per tant, de la dificultat de la programació eficient d’aquests sistemes. Per intentar solucionar-ho, s’han desenvolupat diversos models de programació; un exemple particular en són els models basats en tasques, que fan servir anotacions senzilles per definir treballs paral·lels dins d’una aplicació. La informació que hi ha al nivell dels sistemes en temps d’execució (runtime systems) associada amb aquests models de programació ofereix un gran potencial a l’hora de millorar el disseny del maquinari. D’altra banda, les limitacions tecnològiques fan que la llei de Moore pugui deixar de complir-se properament, per la qual cosa calen nous paradigmes per mantenir les tendències actuals en la millora de rendiment. L’objectiu principal d’aquesta tesi és aprofitar els coneixements que el runtime System té d’una aplicació paral·lela per millorar el disseny de la jerarquia de memòria dins el xip. L’acoblament del runtime system i el microprocessador permet millorar el disseny del maquinari sense malmetre la programabilitat d’aquests sistemes. La primera contribució d’aquesta tesi consisteix en un conjunt de polítiques d’inserció a les memòries cau (cache memories) compartides d’últim nivell que aprofita informació sobre tasques i les dependències de dades entre aquestes. La intuïció que hi ha al darrere d’aquesta proposta es basa en el fet que els fils d’execució paral·lels mostren diferents patrons d’accés a la memòria; fins i tot dins el mateix fil, els accessos a variables diferents sovint segueixen patrons diferents. Les polítiques que s’hi proposen insereixen línies de la memòria cau a diferents ubicacions lògiques en funció dels tipus de dependència i de tasca als quals correspon la petició de memòria. La segona proposta optimitza l’execució de les reduccions, que es defineixen com un patró de programació que combina dades d’entrada per aconseguir la variable de reducció com a resultat. Això s’aconsegueix mitjançant una tècnica assistida pel runtime system per dur a terme reduccions en la jerarquia de la memòria cau del processador, amb l’objectiu que la proposta sigui aplicable de manera universal, sense dependre del tipus de la variable a la qual es realitza la reducció, la seva mida o el patró d’accés. A nivell de programari, es realitza una extensió del model de programació per facilitar que el programador especifiqui les variables de les reduccions que usaran les tasques, així com el nivell de memòria cau desitjat on s’hauria de realitzar una certa reducció. El compilador font a font (compilador source-to-source) i el runtime system s’amplien per traduir i passar aquesta informació al maquinari subjacent. A nivell de maquinari, les memòries cau privades i compartides s’equipen amb unitats funcionals i la lògica corresponent per poder dur a terme les reduccions a la pròpia memòria cau, evitant així moviments de dades innecessaris entre el nucli del processador i la jerarquia de memòria. La tercera contribució proporciona un esquema de priorització assistit pel runtime System per peticions de memòria dins de la jerarquia de memòria del xip. La proposta es basa en la noció de camí crític en el context dels codis paral·lels i en el fet conegut que l’acceleració de les tasques que formen part del camí crític redueix el temps d’execució de l’aplicació sencera. En el context d’aquest treball, la criticitat de les tasques s’observa al nivell del seu tipus ja que permet que el programador les indiqui mitjançant anotacions senzilles. L’acceleració de les tasques crítiques s’aconsegueix prioritzant les corresponents peticions de memòria dins el microprocessador

Proceedings of the First PhD Symposium on Sustainable Ultrascale Computing Systems (NESUS PhD 2016)

Proceedings of the First PhD Symposium on Sustainable Ultrascale Computing Systems (NESUS PhD 2016) Timisoara, Romania. February 8-11, 2016.The PhD Symposium was a very good opportunity for the young researchers to share information and knowledge, to present their current research, and to discuss topics with other students in order to look for synergies and common research topics. The idea was very successful and the assessment made by the PhD Student was very good. It also helped to achieve one of the major goals of the NESUS Action: to establish an open European research network targeting sustainable solutions for ultrascale computing aiming at cross fertilization among HPC, large scale distributed systems, and big data management, training, contributing to glue disparate researchers working across different areas and provide a meeting ground for researchers in these separate areas to exchange ideas, to identify synergies, and to pursue common activities in research topics such as sustainable software solutions (applications and system software stack), data management, energy efficiency, and resilience.European Cooperation in Science and Technology. COS