VLSI implementation of a multi-mode turbo/LDPC decoder architecture

Flexible and reconfigurable architectures have gained wide popularity in the communications field. In particular, reconfigurable architectures for the physical layer are an attractive solution not only to switch among different coding modes but also to achieve interoperability. This work concentrates on the design of a reconfigurable architecture for both turbo and LDPC codes decoding. The novel contributions of this paper are: i) tackling the reconfiguration issue introducing a formal and systematic treatment that, to the best of our knowledge, was not previously addressed; ii) proposing a reconfigurable NoCbased turbo/LDPC decoder architecture and showing that wide flexibility can be achieved with a small complexity overhead. Obtained results show that dynamic switching between most of considered communication standards is possible without pausing the decoding activity. Moreover, post-layout results show that tailoring the proposed architecture to the WiMAX standard leads to an area occupation of 2.75 mm2 and a power consumption of 101.5 mW in the worst case

Flexible LDPC Decoder Architectures

Flexible channel decoding is getting significance with the increase in number of wireless standards and modes within a standard. A flexible channel decoder is a solution providing interstandard and intrastandard support without change in hardware. However, the design of efficient implementation of flexible low-density parity-check (LDPC) code decoders satisfying area, speed, and power constraints is a challenging task and still requires considerable research effort. This paper provides an overview of state-of-the-art in the design of flexible LDPC decoders. The published solutions are evaluated at two levels of architectural design: the processing element (PE) and the interconnection structure. A qualitative and quantitative analysis of different design choices is carried out, and comparison is provided in terms of achieved flexibility, throughput, decoding efficiency, and area (power) consumption

Research on energy-efficient VLSI decoder for LDPC code

制度:新 ; 報告番号:甲3742号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6113Waseda Universit

Towards a reconfigurable hardware architecture for implementing a LDPC module suitable for software radio systems

Forward Error Correction is a key piece in modern digital communications. When a signal is transmitted over a noisy channel, multiple errors are generated. FEC techniques are directed towards the recovery of such errors. In last years, LDPC (Low Density Parity Check) codes have attracted attention of researchers because of their excellent error correction capabilities, but for actual radios high performance is not enough since they require to communicate with other multiple radios too. In general, communication between multiple radios requires the use of different standards. In this sense, Software Defined Radio (SDR) approach allows building multi standard radios based on reconfigurability abilities which means that base components including recovery errors block must provide reconfigurable options. In this paper, some open problems in designing and implementing reconfigurable LDPC components are presented and discussed. Some features of works in the state of the art are commented and possible research lines proposed

Ultra-low power LDPC decoder design with high parallelism for wireless communication system

制度:新 ; 報告番号:甲3423号 ; 学位の種類:博士(工学) ; 授与年月日:2011/9/15 ; 早大学位記番号:新574

Configurable LDPC Decoder Architecture for Regular and Irregular Codes

Low Density Parity Check (LDPC) codes are one of the best error correcting codes that enable the future generations of wireless devices to achieve higher data rates with excellent quality of service. This paper presents two novel flexible decoder architectures. The first one supports (3, 6) regular codes of rate 1/2 that can be used for different block lengths. The second decoder is more general and supports both regular and irregular LDPC codes with twelve combinations of code lengths −648, 1296, 1944-bits and code rates-1/2, 2/3, 3/4, 5/6- based on the IEEE 802.11n standard. All codes correspond to a block-structured parity check matrix, in which the sub-blocks are either a shifted identity matrix or a zero matrix. Prototype architectures for both LDPC decoders have been implemented and tested on a Xilinx field programmable gate array.NokiaNational Science Foundatio