782 research outputs found
Adaptive and Iterative Multi-Branch MMSE Decision Feedback Detection Algorithms for MIMO Systems
In this work, decision feedback (DF) detection algorithms based on multiple
processing branches for multi-input multi-output (MIMO) spatial multiplexing
systems are proposed. The proposed detector employs multiple cancellation
branches with receive filters that are obtained from a common matrix inverse
and achieves a performance close to the maximum likelihood detector (MLD).
Constrained minimum mean-squared error (MMSE) receive filters designed with
constraints on the shape and magnitude of the feedback filters for the
multi-branch MMSE DF (MB-MMSE-DF) receivers are presented. An adaptive
implementation of the proposed MB-MMSE-DF detector is developed along with a
recursive least squares-type algorithm for estimating the parameters of the
receive filters when the channel is time-varying. A soft-output version of the
MB-MMSE-DF detector is also proposed as a component of an iterative detection
and decoding receiver structure. A computational complexity analysis shows that
the MB-MMSE-DF detector does not require a significant additional complexity
over the conventional MMSE-DF detector, whereas a diversity analysis discusses
the diversity order achieved by the MB-MMSE-DF detector. Simulation results
show that the MB-MMSE-DF detector achieves a performance superior to existing
suboptimal detectors and close to the MLD, while requiring significantly lower
complexity.Comment: 10 figures, 3 tables; IEEE Transactions on Wireless Communications,
201
MIMO Transmission with Residual Transmit-RF Impairments
Physical transceiver implementations for multiple-input multiple-output
(MIMO) wireless communication systems suffer from transmit-RF (Tx-RF)
impairments. In this paper, we study the effect on channel capacity and
error-rate performance of residual Tx-RF impairments that defy proper
compensation. In particular, we demonstrate that such residual distortions
severely degrade the performance of (near-)optimum MIMO detection algorithms.
To mitigate this performance loss, we propose an efficient algorithm, which is
based on an i.i.d. Gaussian model for the distortion caused by these
impairments. In order to validate this model, we provide measurement results
based on a 4-stream Tx-RF chain implementation for MIMO orthogonal
frequency-division multiplexing (OFDM).Comment: to be presented at the International ITG Workshop on Smart Antennas -
WSA 201
Two-tier channel estimation aided near-capacity MIMO transceivers relying on norm-based joint transmit and receive antenna selection
We propose a norm-based joint transmit and receive antenna selection (NBJTRAS) aided near-capacity multiple-input multiple-output (MIMO) system relying on the assistance of a novel two-tier channel estimation scheme. Specifically, a rough estimate of the full MIMO channel is first generated using a low-complexity, low-training-overhead minimum mean square error based channel estimator, which relies on reusing a modest number of radio frequency (RF) chains. NBJTRAS is then carried out based on this initial full MIMO channel estimate. The NBJTRAS aided MIMO system is capable of significantly outperforming conventional MIMO systems equipped with the same modest number of RF chains, while dispensing with the idealised simplifying assumption of having perfectly known channel state information (CSI). Moreover, the initial subset channel estimate associated with the selected subset MIMO channel matrix is then used for activating a powerful semi-blind joint channel estimation and turbo detector-decoder, in which the channel estimate is refined by a novel block-of-bits selection based soft-decision aided channel estimator (BBSB-SDACE) embedded in the iterative detection and decoding process. The joint channel estimation and turbo detection-decoding scheme operating with the aid of the proposed BBSB-SDACE channel estimator is capable of approaching the performance of the near-capacity maximumlikelihood (ML) turbo transceiver associated with perfect CSI. This is achieved without increasing the complexity of the ML turbo detection and decoding process
ASIC Implementation Comparison of SIC and LSD Receivers for MIMO-OFDM
MIMO-OFDM receivers with horizontal encoding are considered in this paper. The successive interference cancellation (SIC) algorithm is compared to the K-best list sphere detector (LSD). A modification to the K-best LSD algorithm is
introduced. The SIC and K-best LSD receivers are designed for a 2 x 2 antenna system with 64-quadrature amplitude modulation (QAM). The ASIC implementation results for both architectures are presented. The K-best LSD outperforms the SIC receiver in bad channel conditions but the SIC receiver performs better in
channels with less correlated MIMO streams. The latency of the K-best LSD is large due to the high modulation order and list size. The throughput of the SIC receiver is more than 6 times higher than that of the K-best LSD.TekesFinnish Funding Agency for Technology and InnovationNokiaTexas InstrumentsNokia Siemens Networks (NSN)Elekrobi
Irregular Generic Detection Aided Iterative Downlink SDMA Systems
Abstract—When an iterative-decoding aided system is configured to operate at a near-capacity performance, an excessive complexity may be imposed by the iterative process. In this paper, we propose the novel framework of generic detection, which invokes appropriately amalgamated multiple detectors. Hence the proposed Irregular Generic Detection (IrGD) algorithm may reduce the complexity of iterative detectors. We show in the context of an iterative Down-Link (DL) Space Division Multiple Access (SDMA) system that the proposed IrGD may indeed reduce the complexity of the iterative receiver. The IrGD aided DL-SDMA system detects the appropriate fractions of the received bitstream with the aid of different detectors. This allows us to match the Extrinsic Information Transfer (EXIT) curve of the detector to that of the channel decoder, hence facilitating a near-capacity operation, which reducing the detection complexity by about 28% compared to a powerful near-Maximum-Likelihood (ML) sphere detector benchmark system
Large-Scale MIMO Detection for 3GPP LTE: Algorithms and FPGA Implementations
Large-scale (or massive) multiple-input multiple-output (MIMO) is expected to
be one of the key technologies in next-generation multi-user cellular systems,
based on the upcoming 3GPP LTE Release 12 standard, for example. In this work,
we propose - to the best of our knowledge - the first VLSI design enabling
high-throughput data detection in single-carrier frequency-division multiple
access (SC-FDMA)-based large-scale MIMO systems. We propose a new approximate
matrix inversion algorithm relying on a Neumann series expansion, which
substantially reduces the complexity of linear data detection. We analyze the
associated error, and we compare its performance and complexity to those of an
exact linear detector. We present corresponding VLSI architectures, which
perform exact and approximate soft-output detection for large-scale MIMO
systems with various antenna/user configurations. Reference implementation
results for a Xilinx Virtex-7 XC7VX980T FPGA show that our designs are able to
achieve more than 600 Mb/s for a 128 antenna, 8 user 3GPP LTE-based large-scale
MIMO system. We finally provide a performance/complexity trade-off comparison
using the presented FPGA designs, which reveals that the detector circuit of
choice is determined by the ratio between BS antennas and users, as well as the
desired error-rate performance.Comment: To appear in the IEEE Journal of Selected Topics in Signal Processin
Turbo codes and turbo algorithms
In the first part of this paper, several basic ideas that prompted the coming of turbo codes are commented on. We then present some personal points of view on the main advances obtained in past years on turbo coding and decoding such as the circular trellis termination of recursive systematic convolutional codes and double-binary turbo codes associated with Max-Log-MAP decoding. A novel evaluation method, called genieinitialised iterative processing (GIIP), is introduced to assess the error performance of iterative processing. We show that using GIIP produces a result that can be viewed as a lower bound of the maximum likelihood iterative decoding and detection performance. Finally, two wireless communication systems are presented to illustrate recent applications of the turbo principle, the first one being multiple-input/multiple-output channel iterative detection and the second one multi-carrier modulation with linear precoding
- …