A new circuit technique for reduced leakage current in Deep Submicron CMOS technologies

Modern CMOS processes in the Deep Submicron regime are restricted to supply voltages below 2 volts and further to account for the transistors&apos; field strength limitations and to reduce the power per logic gate. To maintain the high switching performance, the threshold voltage must be scaled according with the supply voltage. However, this leads to an increased subthreshold current of the transistors in standby mode (<i>V</i>_<i>GS</i>=0). Another source of leakage is gate current, which becomes significant for gate oxides of 3nm and below. </p><p style=&quot;line-height: 20px;&quot;> We propose a <b>S</b>elf-<b>B</b>iasing <b>V</b>irtual <b>R</b>ails (SBVR) - CMOS technique which acts like an adaptive local supply voltage in case of standby mode. Most important sources of leakage currents are reduced by this technique. Moreover, SBVR-CMOS is capable of conserving stored information in sleep mode, which is vital for memory circuits. </p><p style=&quot;line-height: 20px;&quot;> Memories are exposed to radiation causing soft errors. This well-known problem becomes even worse in standby mode of typical SRAMs, that have low driving performance to withstand alpha particle hits. In this paper, a 16-transistor SRAM cell is proposed, which combines the advantage of extremely low leakage currents with a very high soft error stability

Design of Low Power Data Preserving Flip Flop Using MTCMOS Technique

In order to reduce overall power consumption, a well-known technique is to scale supply voltages. However, to maintain performance, device threshold voltages must scale as well, which will cause sub threshold leakage currents to increase exponentially. The sub threshold voltage has to affect the two parameters one is the delay and other one is the sub threshold leakage current. Smaller the threshold voltage smaller will be delay while larger will be the sub threshold current. Controlling sub threshold leakage has been explored significantly in the literature, especially in the context of reducing leakage currents in burst mode type circuits, where the system spends the majority of the time in an idle standby, or sleep, state where no computation is taking place. MTCMOS or multi-threshold CMOS has been proposed as a very effective technique for reducing leakage currents during the standby by state by utilizing high sleep devices to gate the power supplies of a low logic block. Although MTCMOS circuit techniques are effective for controlling leakage currents in combinational logic, a drawback is that it can cause internal nodes to float, and cannot be directly used in standard memory cells without corrupting stored data. As a result, several researchers have explored possible MTCMOS latch designs that can reduce leakage currents yet maintain state during the standby modes. In this work a data preserving flip flop with reduced leakage power is designed using MTCMOS technique in 90nm technology with the help of CADENCE tool. The simulation results have shown that the leakage power is reduced by 25.70% compared to CMOS flip flop

Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures

A 10-bit Charge-Redistribution ADC Consuming 1.9 μW at 1 MS/s

This paper presents a 10 bit successive approximation ADC in 65 nm CMOS that benefits from technology scaling. It meets extremely low power requirements by using a charge-redistribution DAC that uses step-wise charging, a dynamic two-stage comparator and a delay-line-based controller. The ADC requires no external reference current and uses only one external supply voltage of 1.0 V to 1.3 V. Its supply current is proportional to the sample rate (only dynamic power consumption). The ADC uses a chip area of approximately 115--225 μm2. At a sample rate of 1 MS/s and a supply voltage of 1.0 V, the 10 bit ADC consumes 1.9 μW and achieves an energy efficiency of 4.4 fJ/conversion-step

Leakage Power Reduction Techniques in Deep Submicron Technologies for VLSI Applications

AbstractThe leakage power dissipation has become one of the most challenging issues in low power VLSI circuit designs especially with on-chip devices as it doubles for every two years[4]-[5]. The scaling down of threshold voltage has contributed enormously towards increase in subthreshold leakage current thereby making the static (leakage) power dissipation very high. According to International Technology Roadmap for Semiconductors (ITRS), the total power dissipation may be significantly contributed by leakage power dissipation [1]. The battery operated devices with long duration in standby mode may be drained out very quickly due to the leakage power. In CMOS submicron technologies, leakage power dissipation plays a significant role. However, various low power design techniques for efficient minimization of leakage power are proposed in the literature review. A comprehensive study and analysis of various leakage power minimization techniques have been presented in this paper. The present research study and its corresponding analysis are mainly focusing on circuit performance parameters. It is implied from the current literature that only an appropriate choice of leakage power minimization technique for a specific application can be effectively carried by a VLSI circuit designer based on sequential analytical approach

Methodology for Standby Leakage Power Reduction in Nanometer-Scale CMOS Circuits

In nanometer-scale CMOS technology, leakage power has become a major component of the total power dissipation due to the downscaling of threshold voltage and gate oxide thickness. The leakage power consumption has received even more attention by increasing demand for mobile devices. Since mobile devices spend a majority of their time in a standby mode, the leakage power savings in standby state is critical to extend battery lifetime. For this reason, low power has become a major factor in designing CMOS circuits. In this dissertation, we propose a novel transistor reordering methodology for leakage reduction. Unlike previous technique, the proposed method provides exact reordering rules for minimum leakage formation by considering all leakage components. Thus, this method formulates an optimized structure for leakage reduction even in complex CMOS logic gate, and can be used in combination with other leakage reduction techniques to achieve further improvement. We also propose a new standby leakage reduction methodology, leakage-aware body biasing, to overcome the shortcomings of a conventional Reverse Body Biasing (RBB) technique. The RBB technique has been used to reduce subthreshold leakage current. Therefore, this technique works well under subthreshold dominant region even though it has intrinsic structural drawbacks. However, such drawbacks cannot be overlooked anymore since gate leakage has become comparable to subthreshold leakage in nanometer-scale region. In addition, BTBT leakage also increases with technology scaling due to the higher doping concentration applied in each process technology. In these circumstances, the objective of leakage minimization is not a single leakage source but the overall leakage sources. The proposed leakage-aware body biasing technique, unlike conventional RBB technique, considers all major leakage sources to minimize the negative effects of existing body biasing approach. This can be achieved by intelligently applying body bias to appropriate CMOS network based on its status (on-/off-state) with the aid of a pin/transistor reordering technique

Design of A Low Power Low Voltage CMOS Opamp

In this paper a CMOS operational amplifier is presented which operates at 2V power supply and 1microA input bias current at 0.8 micron technology using non conventional mode of operation of MOS transistors and whose input is depended on bias current. The unique behaviour of the MOS transistors in subthreshold region not only allows a designer to work at low input bias current but also at low voltage. While operating the device at weak inversion results low power dissipation but dynamic range is degraded. Optimum balance between power dissipation and dynamic range results when the MOS transistors are operated at moderate inversion. Power is again minimised by the application of input dependant bias current using feedback loops in the input transistors of the differential pair with two current substractors. In comparison with the reported low power low voltage opamps at 0.8 micron technology, this opamp has very low standby power consumption with a high driving capability and operates at low voltage. The opamp is fairly small (0.0084 mm 2) and slew rate is more than other low power low voltage opamps reported at 0.8 um technology [1,2]. Vittoz at al [3] reported that slew rate can be improved by adaptive biasing technique and power dissipation can be reduced by operating the device in weak inversion. Though lower power dissipation is achieved the area required by the circuit is very large and speed is too small. So, operating the device in moderate inversion is a good solution. Also operating the device in subthreshold region not only allows lower power dissipation but also a lower voltage operation is achieved.Comment: 8 Pages, VLSICS Journa