Referee-based architectures for massively multiplayer online games

Network computer games are played amongst players on different hosts across the Internet. Massively Multiplayer Online Games (MMOG) are network games in which thousands of players participate simultaneously in each instance of the virtual world. Current commercial MMOG use a Client/Server (C/S) architecture in which the server simulates and validates the game, and notifies players about the current game state. While C/S is very popular, it has several limitations: (i) C/S has poor scalability as the server is a bandwidth and processing bottleneck; (ii) all updates must be routed through the server, reducing responsiveness; (iii) players with lower client-to-server delay than their opponents have an unfair advantage as they can respond to game events faster; and (iv) the server is a single point of failure.The Mirrored Server (MS) architecture uses multiple mirrored servers connected via a private network. MS achieves better scalability, responsiveness, fairness, and reliability than C/S; however, as updates are still routed through the mirrored servers the problems are not eliminated. P2P network game architectures allow players to exchange updates directly, maximising scalability, responsiveness, and fairness, while removing the single point of failure. However, P2P games are vulnerable to cheating. Several P2P architectures have been proposed to detect and/or prevent game cheating. Nevertheless, they only address a subset of cheating methods. Further, these solutions require costly distributed validation algorithms that increase game delay and bandwidth, and prevent players with high latency from participating.In this thesis we propose a new cheat classification that reflects the levels in which the cheats occur: game, application, protocol, or infrastructure. We also propose three network game architectures: the Referee Anti-Cheat Scheme (RACS), the Mirrored Referee Anti-Cheat Scheme (MRACS), and the Distributed Referee Anti-Cheat Scheme (DRACS); which maximise game scalability, responsiveness, and fairness, while maintaining cheat detection/prevention equal to that in C/S. Each proposed architecture utilises one or more trusted referees to validate the game simulation - similar to the server in C/S - while allowing players to exchange updates directly - similar to peers in P2P.RACS is a hybrid C/S and P2P architecture that improves C/S by using a referee in the server. RACS allows honest players to exchange updates directly between each other, with a copy sent to the referee for validation. By allowing P2P communication RACS has better responsiveness and fairness than C/S. Further, as the referee is not required to forward updates it has better bandwidth and processing scalability. The RACS protocol could be applied to any existing C/S game. Compared to P2P protocols RACS has lower delay, and allows players with high delay to participate. Like in many P2P architectures, RACS divides time into rounds. We have proposed two efficient solutions to find the optimal round length such that the total system delay is minimised.MRACS combines the RACS and MS architectures. A referee is used at each mirror to validate player updates, while allowing players to exchange updates directly. By using multiple mirrored referees the bandwidth required by each referee, and the player-to mirror delays, are reduced; improving the scalability, responsiveness and fairness of RACS, while removing its single point of failure. Direct communication MRACS improves MS in terms of its responsiveness, fairness, and scalability. To maximise responsiveness, we have defined and solved the Client-to-Mirror Assignment (CMA) problem to assign clients to mirrors such that the total delay is minimised, and no mirror is overloaded. We have proposed two sets of efficient solutions: the optimal J-SA/L-SA and the faster heuristic J-Greedy/L-Greedy to solve CMA.DRACS uses referees distributed to player hosts to minimise the publisher / developer infrastructure, and maximise responsiveness and/or fairness. To prevent colluding players cheating DRACS requires every update to be validated by multiple unaffiliated referees, providing cheat detection / prevention equal to that in C/S. We have formally defined the Referee Selection Problem (RSP) to select a set of referees from the untrusted peers such that responsiveness and/or fairness are maximised, while ensuring the probability of the majority of referees colluding is below a pre-defined threshold. We have proposed two efficient algorithms, SRS-1 and SRS-2, to solve the problem.We have evaluated the performances of RACS, MRACS, and DRACS analytically and using simulations. We have shown analytically that RACS, MRACS and DRACS have cheat detection/prevention equivalent to that in C/S. Our analysis shows that RACS has better scalability and responsiveness than C/S; and that MRACS has better scalability and responsiveness than C/S, RACS, and MS. As there is currently no publicly available traces from MMOG we have constructed artificial and realistic inputs. We have used these inputs on all simulations in this thesis to show the benefits of our proposed architectures and algorithms

Cheating in networked computer games: a review

The increasing popularity of Massively Multiplayer Online Games (MMOG) - games involving thousands of players participating simultaneously in a single virtual world - has highlighted the scalability bottlenecks present in centralised Client/Server (C/S) architectures. Researchers are proposing Peer-to-Peer (P2P) architectures as a scalable alternative to C/S; however, P2P is more vulnerable to cheating as it decentralises the game state and logic to un-trusted peer machines, rather than using trusted centralised servers. Cheating is a major concern for online games, as a minority of cheaters can potentially ruin the game for all players. In this paper we present a review and classification of known cheats, and provide real-world examples where possible. Further, we discuss counter measures used by C/S architectures to prevent cheating. Finally, we discuss several P2P architectures designed to prevent cheating, highlighting their strengths and weaknesses

A survey on network game cheats and P2P solutions

The increasing popularity of Massively Multiplayer Online Games (MMOG) - games involving thousands of players participating simultaneously in a single virtual world - has highlighted the scalability bottlenecks present in centralised Client/Server (C/S) architectures. Researchers are proposing Peer-to-Peer (P2P) game technologies as a scalable alternative to C/S; however, P2P is more vulnerable to cheating as it decentralises the game state and logic to un-trusted peer machines, rather than using trusted centralised servers. Cheating is a major concern for online games, as a minority of cheaters can potentially ruin the game for all players. In this paper we present a review and classification of known cheats, and provide real-world examples where possible. Further, we discuss counter measures used by C/S game technologies to prevent cheating. Finally, we discuss several P2P architectures designed to prevent cheating, highlighting their strengths and weaknesses

Enhanced mirrored servers for network games

The Mirrored Server (MS) architecture uses multiple mirrored servers across multiple locations to alleviate the bandwidth bottleneck in the Client/Server (C/S) architecture. Each mirror receives and multicasts player updates to the others, simulates the game, and disseminates the new game state to players. However, keeping the game state consistent between mirrors in the presence of network delay, and maintaining game responsiveness requires each server in MS to simulate the game multiple times for each game update, and additional times in the event of costly rollbacks. In this paper we propose the Enhanced Mirrored Server (EMS) architecture. Like in the Peer-to-Peer architecture, EMS allows peers to exchange updates directly, resulting in a higher tolerance to delay at the mirrors. We propose using bucket synchronization in the mirrors so that each server in EMS simulates the game only once for each update and does not require rollbacks. The server disseminates updates to clients only in the event of inconsistency, and thus its outgoing bandwidth is lower than in MS. Our EMS uses cryptographic techniques to provide security equivalent to C/S, and prevents the timestamp cheat possible in MS. Our analytical analysis and simulations show the advantages of EMS over MS

Enabling scalability by partitioning virtual environments using frontier sets

We present a class of partitioning scheme that we have called frontier sets. Frontier sets build on the notion of a potentially visible set (PVS). In a PVS, a world is subdivided into cells and for each cell all the other cells that can be seen are computed. In contrast, a frontier set considers pairs of cells, A and B. For each pair, it lists two sets of cells (two frontiers), FAB and FBA. By definition, from no cell in FAB is any cell in FBA visible and vice versa. Our initial use of frontier sets has been to enable scalability in distributed networking. This is possible because, for example, if at time t0 Player1 is in cell A and Player2 is in cell B, as long as they stay in their respective frontiers, they do not need to send update information to each other. In this paper we describe two strategies for building frontier sets. Both strategies are dynamic and compute frontiers only as necessary at runtime. The first is distance-based frontiers. This strategy requires precomputation of an enhanced potentially visible set. The second is greedy frontiers. This strategy is more expensive to compute at runtime, however it leads to larger and thus more efficient frontiers. Network simulations using code based on the Quake II engine show that frontiers have significant promise and may allow a new class of scalable peer-to-peer game infrastructures to emerge

Distributed virtual environment scalability and security

Distributed virtual environments (DVEs) have been an active area of research and engineering for more than 20 years. The most widely deployed DVEs are network games such as Quake, Halo, and World of Warcraft (WoW), with millions of users and billions of dollars in annual revenue. Deployed DVEs remain expensive centralized implementations despite significant research outlining ways to distribute DVE workloads. This dissertation shows previous DVE research evaluations are inconsistent with deployed DVE needs. Assumptions about avatar movement and proximity - fundamental scale factors - do not match WoW’s workload, and likely the workload of other deployed DVEs. Alternate workload models are explored and preliminary conclusions presented. Using realistic workloads it is shown that a fully decentralized DVE cannot be deployed to today’s consumers, regardless of its overhead. Residential broadband speeds are improving, and this limitation will eventually disappear. When it does, appropriate security mechanisms will be a fundamental requirement for technology adoption. A trusted auditing system (“Carbon”) is presented which has good security, scalability, and resource characteristics for decentralized DVEs. When performing exhaustive auditing, Carbon adds 27% network overhead to a decentralized DVE with a WoW-like workload. This resource consumption can be reduced significantly, depending upon the DVE’s risk tolerance. Finally, the Pairwise Random Protocol (PRP) is described. PRP enables adversaries to fairly resolve probabilistic activities, an ability missing from most decentralized DVE security proposals. Thus, this dissertations contribution is to address two of the obstacles for deploying research on decentralized DVE architectures. First, lack of evidence that research results apply to existing DVEs. Second, the lack of security systems combining appropriate security guarantees with acceptable overhead

Distributed game

Dissertação de mestrado em Engenharia InformáticaThe demand for online games has risen over the years, expanding multiplayer support for new and different game genres. Among them are Massively Multiplayer Online games, one of the most popular and successful game types in the industry. Nowadays, this industry is thriving, evolving alongside technological advancements and producing billions in revenue, making it an economic importance. However, as the complexity of these games grows, so do the challenges they face when constructing them. This dissertation aims to implement a distributed game, through a proof of concept or an existing game, using a distributed architecture to acquire knowledge in the construction of such complex systems and the effort involved in dealing with consistency, maintaining communication infrastructure, and managing data in a distributed way. It is also intended that this project implements multiple mechanisms capable of autonomously helping manage and maintain the correct state of the system. To evaluate the proposed solution, a detailed analysis is carried out with performance benchmark analysis, stress testing, followed by an examination of its security, scalability, and distribution’s resilience. Overall, the present research work allowed for a greater understanding of the technologies and approaches used in constructing a gaming system, establishing a new set of development opportunities to be further investi gated upon the constructed solution.A procura por jogos online aumentou ao longo dos anos, expandindo o suporte multiplayer para novos e diferentes géneros. Entre estes estão os jogos Massively Multiplayer Online, um dos tipos de jogos mais populares e bem-sucedidos na indústria. Atualmente, esta indústria está a prosperar, evoluindo com os avanços tecnológicos e gerando milhares de milhões em receita, tornando-se uma importância económica. Porém, à medida que a complexidade destes jogos aumenta, também aumenta os problemas encontrados durante a sua construção. Esta dissertação tem como objetivo implementar um jogo distribuído, através de uma prova de conceito ou um jogo existente, usando uma arquitetura distribuída a fim de adquirir conhecimento na construção destes sistemas complexos e o esforço envolvido em lidar com consistência, manter a infraestrutura de comunicação e gerir dados de maneira distribuída. Para isto, é pretendido que este projeto também implemente vários mecanismos capazes de, forma autônoma, ajudar a gerir e manter o correto estado do sistema. Para avaliar o solução proposta, uma análise detalhada é realizada sobre o desempenho, segurança, escalabilidade e resiliência da distribuição do sistema. De forma geral, o presente trabalho de pesquisa permitiu uma maior compreensão das tecnologias e abordagens utilizadas na construção de um sistema de jogos, estabelecendo um novo conjunto de oportunidades de desenvolvimento a serem investigadas sobre a solução construída

Round length optimisation for P2P network gaming

The Referee Anti-Cheat Scheme (RACS) increases the scalability of Client/Server (C/S) games by allowing clients to exchange updates directly. Further, RACS maintains the security of C/S as the trusted referee (running on the server) is the game authority, simulating all client updates to validate the simulation. In RACS time is divided into rounds, and every player generates one update per round. The round length d is bounded by dmax which is specified by the game developer. The referee may reduce d to increase game responsiveness for players. Existing approaches to adjust d require purely distributed algorithms as they do not have a trusted central authority. These algorithms are slow and use considerable bandwidth. In this paper we propose a delay model for RACS, and two centralised algorithms to calculate d for maximum responsiveness - an optimal brute force approach and an efficient voting algorithm. We use simulation to show that the voting algorithm produces nearly optimal results, and analytical analysis to show that its processing requirements are far lower than the brute force approach