9,912 research outputs found
Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris
Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar
Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang
dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai
325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi
Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang
diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan
pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan
hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur
penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan
Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang
mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap.
Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat
hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara
minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif
sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin
tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar
dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam
diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh
itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam
membuat kajian yang akan datang
Accurate position tracking with a single UWB anchor
Accurate localization and tracking are a fundamental requirement for robotic
applications. Localization systems like GPS, optical tracking, simultaneous
localization and mapping (SLAM) are used for daily life activities, research,
and commercial applications. Ultra-wideband (UWB) technology provides another
venue to accurately locate devices both indoors and outdoors. In this paper, we
study a localization solution with a single UWB anchor, instead of the
traditional multi-anchor setup. Besides the challenge of a single UWB ranging
source, the only other sensor we require is a low-cost 9 DoF inertial
measurement unit (IMU). Under such a configuration, we propose continuous
monitoring of UWB range changes to estimate the robot speed when moving on a
line. Combining speed estimation with orientation estimation from the IMU
sensor, the system becomes temporally observable. We use an Extended Kalman
Filter (EKF) to estimate the pose of a robot. With our solution, we can
effectively correct the accumulated error and maintain accurate tracking of a
moving robot.Comment: Accepted by ICRA202
RFID Localisation For Internet Of Things Smart Homes: A Survey
The Internet of Things (IoT) enables numerous business opportunities in
fields as diverse as e-health, smart cities, smart homes, among many others.
The IoT incorporates multiple long-range, short-range, and personal area
wireless networks and technologies into the designs of IoT applications.
Localisation in indoor positioning systems plays an important role in the IoT.
Location Based IoT applications range from tracking objects and people in
real-time, assets management, agriculture, assisted monitoring technologies for
healthcare, and smart homes, to name a few. Radio Frequency based systems for
indoor positioning such as Radio Frequency Identification (RFID) is a key
enabler technology for the IoT due to its costeffective, high readability
rates, automatic identification and, importantly, its energy efficiency
characteristic. This paper reviews the state-of-the-art RFID technologies in
IoT Smart Homes applications. It presents several comparable studies of RFID
based projects in smart homes and discusses the applications, techniques,
algorithms, and challenges of adopting RFID technologies in IoT smart home
systems.Comment: 18 pages, 2 figures, 3 table
Graph Optimization Approach to Range-based Localization
In this paper, we propose a general graph optimization based framework for
localization, which can accommodate different types of measurements with
varying measurement time intervals. Special emphasis will be on range-based
localization. Range and trajectory smoothness constraints are constructed in a
position graph, then the robot trajectory over a sliding window is estimated by
a graph based optimization algorithm. Moreover, convergence analysis of the
algorithm is provided, and the effects of the number of iterations and window
size in the optimization on the localization accuracy are analyzed. Extensive
experiments on quadcopter under a variety of scenarios verify the effectiveness
of the proposed algorithm and demonstrate a much higher localization accuracy
than the existing range-based localization methods, especially in the altitude
direction
Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI
We present a low complexity experimental RF-based indoor localization system
based on the collection and processing of WiFi RSSI signals and processing
using a RSS-based multi-lateration algorithm to determine a robotic mobile
node's location. We use a real indoor wireless testbed called w-iLab.t that is
deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this
testbed is that it provides tools and interfaces using Global Environment for
Network Innovations (GENI) project to easily create reproducible wireless
network experiments in a controlled environment. We provide a low complexity
algorithm to estimate the location of the mobile robots in the indoor
environment. In addition, we provide a comparison between some of our collected
measurements with their corresponding location estimation and the actual robot
location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission
from IEEE must be obtained for all other uses, in any current or future
media, including reprinting/republishing this material for advertising or
promotional purposes, creating new collective works, for resale or
redistribution to servers or lists, or reuse of any copyrighted component of
this work in other work
ALO: An ultrasound system for localization and orientation based on angles
This is the author’s version of a work that was accepted for publication in Microelectronics Journal. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Microelectronics Journal, Vol 44, Issue 10, (October 2013). http://dx.doi.org/10.1016/j.mejo.2013.01.001This paper presents a low cost system based on ultrasound transducers to obtain the localization and orientation information of a mobile node, such as a robot, in a 2D indoor space. The system applies a new differential time of arrival (DTOA) technique with reduced computational cost, which is called ALO (angle localization and orientation). Instead of directly calculating its position, the system calculates the direction of arrival of the received ultrasonic signal and, through it, its position and orientation. A prototype of a robot has been built in order to show the validity of the method through experimental results
Development of a tabletop guidance system for educational robots
The guidance of a vehicle in an outdoor setting is typically implemented using a Real Time Kinematic Global Positioning System (RTK-GPS) potentially enhanced by auxiliary sensors such as electronic compasses, rotation encoders, gyroscopes, and vision systems. Since GPS does not function in an indoor setting where educational competitions are often held, an alternative guidance system was developed. This article describes a guidance method that contains a laser-based localization system, which uses a robot-borne single laser transmitter spinning in a horizontal plane at an angular velocity up to 81 radians per second. Sensor arrays positioned in the corners of a flat rectangular table with dimensions of 1.22 m × 1.83 m detected the laser beam passages. The relative time differences among the detections of the laser passages gave an indication of the angles of the sensors with respect to the laser beam transmitter on the robot. These angles were translated into Cartesian coordinates. The guidance of the robot was implemented using a uni-directional wireless serial connection and position feedback from the localization system. Three experiments were conducted to test the system: 1) the accuracy of the static localization system was determined while the robot stood still. In this test the average error among valid measurements was smaller than 0.3 %. However, a maximum of 3.7 % of the measurements were invalid due to several causes. 2) The accuracy of the guidance system was assessed while the robot followed a straight line. The average deviation from this straight line was 3.6 mm while the robot followed a path with a length of approximately 0.9 m. 3) The overall performance of the guidance system was studied while the robot followed a complex path consisting of 33 sub-paths. The conclusion was that the system worked reasonably accurate, unless the robot came in close proximity
Scan matching by cross-correlation and differential evolution
Scan matching is an important task, solved in the context of many high-level problems including pose estimation, indoor localization, simultaneous localization and mapping and others. Methods that are accurate and adaptive and at the same time computationally efficient are required to enable location-based services in autonomous mobile devices. Such devices usually have a wide range of high-resolution sensors but only a limited processing power and constrained energy supply. This work introduces a novel high-level scan matching strategy that uses a combination of two advanced algorithms recently used in this field: cross-correlation and differential evolution. The cross-correlation between two laser range scans is used as an efficient measure of scan alignment and the differential evolution algorithm is used to search for the parameters of a transformation that aligns the scans. The proposed method was experimentally validated and showed good ability to match laser range scans taken shortly after each other and an excellent ability to match laser range scans taken with longer time intervals between them.Web of Science88art. no. 85
- …