Highly Reliable Quadruple-Node Upset-Tolerant D-Latch

This work was supported in part by the Spanish MCIN/AEI /10.13039/501100011033/ FEDER under Grant PID2020-117344RB-I00, and in part by the Regional Government under Grant P20_00265 and Grant P20_00633.As CMOS technology scaling pushes towards the reduction of the length of transistors, electronic circuits face numerous reliability issues, and in particular nodes of D-latches at nano-scale confront multiple-node upset errors due to their operation in harsh radiative environments. In this manuscript, a new high reliable D-latch which can tolerate quadruple-node upsets is presented. The design is based on a low-cost single event double-upset tolerant (LSEDUT) cell and a clock-gating triple-level soft-error interceptive module (CG-SIM). Due to its LSEDUT base, it can tolerate two upsets, but the combination of two LSEDUTs and the triple-level CG-SIM provides the proposed D-latch with remarkable quadruple-node upsets (QNU) tolerance. Applying LSEDUTs for designing a QNU-tolerant D-latch improves considerably its features; in particular, this approach enhances its reliability against process variations, such as threshold voltage and (W/L) transistor variability, compared to previous QNU-tolerant D-latches and double-node-upset tolerant latches. Furthermore, the proposed D-latch not only tolerates QNUs, but it also features a clear advantage in comparison with the previous clock gating-based quadruple-node-upset-tolerant (QNUTL-CG) D-latch: it can mask single event transients. Speci c gures of merit endorse the gains introduced by the new design: compared with the QNUTL-CG D-latch, the improvements of the maximum standard deviations of the gate delay, induced by threshold voltage and (W/L) transistors variability of the proposed D-latch, are 13.8% and 5.7%, respectively. Also, the proposed D-latch has 23% lesser maximum standard deviation in power consumption, resulting from threshold voltage variability, when compared to the QNUTL-CG D-latch.Spanish MCIN/AEI /10.13039/501100011033/ FEDER under Grant PID2020-117344RB-I00Regional Government under Grant P20_00265 and Grant P20_0063

Low-Cost Soft Error Robust Hardened D-Latch for CMOS Technology Circuit

In this paper, a Soft Error Hardened D-latch with improved performance is proposed, also featuring Single Event Upset (SEU) and Single Event Transient (SET) immunity. This novel D-latch can tolerate particles as charge injection in different internal nodes, as well as the input and output nodes. The performance of the new circuit has been assessed through different key parameters, such as power consumption, delay, Power-Delay Product (PDP) at various frequencies, voltage, temperature, and process variations. A set of simulations has been set up to benchmark the new proposed D-latch in comparison to previous D-latches, such as the Static D-latch, TPDICE-based D-latch, LSEH-1 and DICE D-latches. A comparison between these simulations proves that the proposed D-latch not only has a better immunity, but also features lower power consumption, delay, PDP, and area footprint. Moreover, the impact of temperature and process variations, such as aspect ratio (W/L) and threshold voltage transistor variability, on the proposed D-latch with regard to previous D-latches is investigated. Specifically, the delay and PDP of the proposed D-latch improves by 60.3% and 3.67%, respectively, when compared to the reference Static D-latch. Furthermore, the standard deviation of the threshold voltage transistor variability impact on the delay improved by 3.2%, while its impact on the power consumption improves by 9.1%. Finally, it is shown that the standard deviation of the (W/L) transistor variability on the power consumption is improved by 56.2%

A low power and soft error resilience guard-gated Quartro-based flip-flop in 45 nm CMOS technology

Abstract Conventional flip‐flops are more vulnerable to particle strikes in a radiation environment. To overcome this disadvantage, in the literature, many radiation‐hardened flip‐flops (FFs) based on techniques like triple modular redundancy, dual interlocked cell, Quatro and guard‐gated Quatro cell, and so on, are discussed. The flip‐flop realized using radiation hardened by design Quatro cell is named as the improved version of Quatro flip‐flop (IVQFF). Single event upset (SEU) at inverter stages of master/slave and at output are the two drawbacks of IVQFF. This study proposes a guard‐gated Quatro FF (GQFF) using guard‐gated Quatro cell and Muller C‐element. To overcome the SEU at inverter stages of IVQFF, in GQFF, the inverter stages are realized in a parallel fashion. A dual‐input Muller C‐element is connected to the GQFF output stage to mask the SEU and thus maintain the correct output. The proposed GQFF tolerates both single node upset (SNU) and double node upset (DNU). It also achieves low power. To prove the efficacy, GQFF and the existing FFs are implemented in 45 nm Complementary Metal Oxide Semiconductor (CMOS) technology. From the simulation results, it may be noted that the GQFF is 100% immune to SNUs and 50% immune to DNUs

A GHz-range, High-resolution Multi-modulus Prescaler for Extreme Environment Applications

The generation of a precise, low-noise, reliable clock source is critical to developing mixed-signal and digital electronic systems. The applications of such a clock source are greatly expanded if the clock source can be configured to output different clock frequencies. The phase-locked loop (PLL) is a well-documented architecture for realizing this configurable clock source. Principle to the configurability of a PLL is a multi-modulus divider. The resolution of this divider (or prescaler) dictates the resolution of the configurable PLL output frequency. In integrated PLL designs, such a multi-modulus prescaler is usually sourced from a GHz-range voltage-controlled oscillator. Therefore, a fully-integrated PLL ASIC requires the development of a high-speed, high-resolution multi-modulus prescaler. The design challenges associated with developing such a prescaler are compounded when the application requires the device to operate in an extreme environment. In these extreme environments (often extra-terrestrial), wide temperature ranges and radiation effects can adversely affect the operation of electronic systems. Even more problematic is that extreme temperatures and ionizing radiation can cause permanent damage to electronic devices. Typical commercial-off-the-shelf (COTS) components are not able withstand such an environment, and any electronics operating in these extreme conditions must be designed to accommodate such operation. This dissertation describes the development of a high-speed, high-resolution, multi-modulus prescaler capable of operating in an extreme environment. This prescaler has been developed using current-mode logic (CML) on a 180-nm silicon-germanium (SiGe) BiCMOS process. The prescaler is capable of operating up to at least 5.4 GHz over a division range of 16-48 with a total of 27 configurable moduli. The prescaler is designed to provide excellent ionizing radiation hardness, single-event latch-up (SEL) immunity, and single-event upset (SEU) resistance over a temperature range of −180°C to 125°C

INVESTIGATING THE EFFECTS OF SINGLE-EVENT UPSETS IN STATIC AND DYNAMIC REGISTERS

Radiation-induced single-event upsets (SEUs) pose a serious threat to the reliability of registers. The existing SEU analyses for static CMOS registers focus on the circuit-level impact and may underestimate the pertinent SEU information provided through node analysis. This thesis proposes SEU node analysis to evaluate the sensitivity of static registers and apply the obtained node information to improve the robustness of the register through selective node hardening (SNH) technique. Unlike previous hardening techniques such as the Triple Modular Redundancy (TMR) and the Dual Interlocked Cell (DICE) latch, the SNH method does not introduce larger area overhead. Moreover, this thesis also explores the impact of SEUs in dynamic flip-flops, which are appealing for the design of high-performance microprocessors. Previous work either uses the approaches for static flip-flops to evaluate SEU effects in dynamic flip-flops or overlook the SEU injected during the precharge phase. In this thesis, possible SEU sensitive nodes in dynamic flip-flops are re-examined and their window of vulnerability (WOV) is extended. Simulation results for SEU analysis in non-hardened dynamic flip-flops reveal that the last 55.3 % of the precharge time and a 100% evaluation time are affected by SEUs

STUDY OF SINGLE-EVENT EFFECTS ON DIGITAL SYSTEMS

Microelectronic devices and systems have been extensively utilized in a variety of radiation environments, ranging from the low-earth orbit to the ground level. A high-energy particle from such an environment may cause voltage/current transients, thereby inducing Single Event Effect (SEE) errors in an Integrated Circuit (IC). Ever since the first SEE error was reported in 1975, this community has made tremendous progress in investigating the mechanisms of SEE and exploring radiation tolerant techniques. However, as the IC technology advances, the existing hardening techniques have been rendered less effective because of the reduced spacing and charge sharing between devices. The Semiconductor Industry Association (SIA) roadmap has identified radiation-induced soft errors as the major threat to the reliable operation of electronic systems in the future. In digital systems, hardening techniques of their core components, such as latches, logic, and clock network, need to be addressed. Two single event tolerant latch designs taking advantage of feedback transistors are presented and evaluated in both single event resilience and overhead. These feedback transistors are turned OFF in the hold mode, thereby yielding a very large resistance. This, in turn, results in a larger feedback delay and higher single event tolerance. On the other hand, these extra transistors are turned ON when the cell is in the write mode. As a result, no significant write delay is introduced. Both designs demonstrate higher upset threshold and lower cross-section when compared to the reference cells. Dynamic logic circuits have intrinsic single event issues in each stage of the operations. The worst case occurs when the output is evaluated logic high, where the pull-up networks are turned OFF. In this case, the circuit fails to recover the output by pulling the output up to the supply rail. A capacitor added to the feedback path increases the node capacitance of the output and the feedback delay, thereby increasing the single event critical charge. Another differential structure that has two differential inputs and outputs eliminates single event upset issues at the expense of an increased number of transistors. Clock networks in advanced technology nodes may cause significant errors in an IC as the devices are more sensitive to single event strikes. Clock mesh is a widely used clocking scheme in a digital system. It was fabricated in a 28nm technology and evaluated through the use of heavy ions and laser irradiation experiments. Superior resistance to radiation strikes was demonstrated during these tests. In addition to mitigating single event issues by using hardened designs, built-in current sensors can be used to detect single event induced currents in the n-well and, if implemented, subsequently execute fault correction actions. These sensors were simulated and fabricated in a 28nm CMOS process. Simulation, as well as, experimental results, substantiates the validity of this sensor design. This manifests itself as an alternative to existing hardening techniques. In conclusion, this work investigates single event effects in digital systems, especially those in deep-submicron or advanced technology nodes. New hardened latch, dynamic logic, clock, and current sensor designs have been presented and evaluated. Through the use of these designs, the single event tolerance of a digital system can be achieved at the expense of varying overhead in terms of area, power, and delay

Radiation Tolerant Electronics, Volume II

Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade.After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects

STAHL: A Novel Scan-Test-Aware Hardened Latch Design

As modern technology nodes become more susceptible to soft errors, many radiation hardened latch designs have been proposed. However, redundant circuitry used to tolerate soft errors in such hardened latches also reduces the test coverage of cell-internal manufacturing defects. To avoid potential test escapes that lead to soft error vulnerability and reliability issues, this paper proposes a novel Scan-Test-Aware Hardened Latch (STAHL). Simulation results show that STAHL has superior defect coverage compared to previous hardened latches while maintaining full radiation hardening in function mode.24th IEEE European Test Symposium (ETS\u2719), May 27-31, 2019, Baden-Baden, German

Rule-Based Design for Low-Cost Double-Node Upset Tolerant Self-Recoverable D-Latch

This paper presents a low-cost, self-recoverable, double-node upset tolerant latch aiming at nourishing the lack of these devices in the state of the art, especially featuring self-recoverability while maintaining a low-cost pro le. Thus, this D-latch may be useful for high reliability and high-performance safety-critical applications as it can detect and recover faults happening during holding time in harsh radiation environments. The proposed D-latch design is based on a low-cost single event double-node upset tolerant latch and a rule-based double-node upset (DNU) tolerant latch which provides it with the self-recoverability against DNU, but paired with a low transistor count and high performance. Simulation waveforms support the achievements and demonstrate that this new D-latch is fully self-recoverable against double-node upset. In addition, the minimum improvement of the delay-power-area product of the proposed rule-based design for the low-cost DNU tolerant self-recoverable latch (RB-LDNUR) is 59%, compared with the latest DNU self-recoverable latch on the literature.Spanish Government MCIN/AEI/10.13039/501100011033/FEDER PID2020-117344RB-I00Regional Government P20_00265 P20_00633 B-RNM-680-UGR2

Soft-Error Resilience Framework For Reliable and Energy-Efficient CMOS Logic and Spintronic Memory Architectures

The revolution in chip manufacturing processes spanning five decades has proliferated high performance and energy-efficient nano-electronic devices across all aspects of daily life. In recent years, CMOS technology scaling has realized billions of transistors within large-scale VLSI chips to elevate performance. However, these advancements have also continually augmented the impact of Single-Event Transient (SET) and Single-Event Upset (SEU) occurrences which precipitate a range of Soft-Error (SE) dependability issues. Consequently, soft-error mitigation techniques have become essential to improve systems\u27 reliability. Herein, first, we proposed optimized soft-error resilience designs to improve robustness of sub-micron computing systems. The proposed approaches were developed to deliver energy-efficiency and tolerate double/multiple errors simultaneously while incurring acceptable speed performance degradation compared to the prior work. Secondly, the impact of Process Variation (PV) at the Near-Threshold Voltage (NTV) region on redundancy-based SE-mitigation approaches for High-Performance Computing (HPC) systems was investigated to highlight the approach that can realize favorable attributes, such as reduced critical datapath delay variation and low speed degradation. Finally, recently, spin-based devices have been widely used to design Non-Volatile (NV) elements such as NV latches and flip-flops, which can be leveraged in normally-off computing architectures for Internet-of-Things (IoT) and energy-harvesting-powered applications. Thus, in the last portion of this dissertation, we design and evaluate for soft-error resilience NV-latching circuits that can achieve intriguing features, such as low energy consumption, high computing performance, and superior soft errors tolerance, i.e., concurrently able to tolerate Multiple Node Upset (MNU), to potentially become a mainstream solution for the aerospace and avionic nanoelectronics. Together, these objectives cooperate to increase energy-efficiency and soft errors mitigation resiliency of larger-scale emerging NV latching circuits within iso-energy constraints. In summary, addressing these reliability concerns is paramount to successful deployment of future reliable and energy-efficient CMOS logic and spintronic memory architectures with deeply-scaled devices operating at low-voltages