3,606 research outputs found
High-Rate Space-Time Coded Large MIMO Systems: Low-Complexity Detection and Channel Estimation
In this paper, we present a low-complexity algorithm for detection in
high-rate, non-orthogonal space-time block coded (STBC) large-MIMO systems that
achieve high spectral efficiencies of the order of tens of bps/Hz. We also
present a training-based iterative detection/channel estimation scheme for such
large STBC MIMO systems. Our simulation results show that excellent bit error
rate and nearness-to-capacity performance are achieved by the proposed
multistage likelihood ascent search (M-LAS) detector in conjunction with the
proposed iterative detection/channel estimation scheme at low complexities. The
fact that we could show such good results for large STBCs like 16x16 and 32x32
STBCs from Cyclic Division Algebras (CDA) operating at spectral efficiencies in
excess of 20 bps/Hz (even after accounting for the overheads meant for pilot
based training for channel estimation and turbo coding) establishes the
effectiveness of the proposed detector and channel estimator. We decode perfect
codes of large dimensions using the proposed detector. With the feasibility of
such a low-complexity detection/channel estimation scheme, large-MIMO systems
with tens of antennas operating at several tens of bps/Hz spectral efficiencies
can become practical, enabling interesting high data rate wireless
applications.Comment: v3: Performance/complexity comparison of the proposed scheme with
other large-MIMO architectures/detectors has been added (Sec. IV-D). The
paper has been accepted for publication in IEEE Journal of Selected Topics in
Signal Processing (JSTSP): Spl. Iss. on Managing Complexity in Multiuser MIMO
Systems. v2: Section V on Channel Estimation is update
Space-time coding techniques with bit-interleaved coded modulations for MIMO block-fading channels
The space-time bit-interleaved coded modulation (ST-BICM) is an efficient
technique to obtain high diversity and coding gain on a block-fading MIMO
channel. Its maximum-likelihood (ML) performance is computed under ideal
interleaving conditions, which enables a global optimization taking into
account channel coding. Thanks to a diversity upperbound derived from the
Singleton bound, an appropriate choice of the time dimension of the space-time
coding is possible, which maximizes diversity while minimizing complexity.
Based on the analysis, an optimized interleaver and a set of linear precoders,
called dispersive nucleo algebraic (DNA) precoders are proposed. The proposed
precoders have good performance with respect to the state of the art and exist
for any number of transmit antennas and any time dimension. With turbo codes,
they exhibit a frame error rate which does not increase with frame length.Comment: Submitted to IEEE Trans. on Information Theory, Submission: January
2006 - First review: June 200
Frequency Domain Hybrid-ARQ Chase Combining for Broadband MIMO CDMA Systems
In this paper, we consider high-speed wireless packet access using code
division multiple access (CDMA) and multiple-input multiple-output (MIMO).
Current wireless standards, such as high speed packet access (HSPA), have
adopted multi-code transmission and hybrid-automatic repeat request (ARQ) as
major technologies for delivering high data rates. The key technique in
hybrid-ARQ, is that erroneous data packets are kept in the receiver to
detect/decode retransmitted ones. This strategy is refereed to as packet
combining. In CDMA MIMO-based wireless packet access, multi-code transmission
suffers from severe performance degradation due to the loss of code
orthogonality caused by both interchip interference (ICI) and co-antenna
interference (CAI). This limitation results in large transmission delays when
an ARQ mechanism is used in the link layer. In this paper, we investigate
efficient minimum mean square error (MMSE) frequency domain equalization
(FDE)-based iterative (turbo) packet combining for cyclic prefix (CP)-CDMA MIMO
with Chase-type ARQ. We introduce two turbo packet combining schemes: i) In the
first scheme, namely "chip-level turbo packet combining", MMSE FDE and packet
combining are jointly performed at the chip-level. ii) In the second scheme,
namely "symbol-level turbo packet combining", chip-level MMSE FDE and
despreading are separately carried out for each transmission, then packet
combining is performed at the level of the soft demapper. The computational
complexity and memory requirements of both techniques are quite insensitive to
the ARQ delay, i.e., maximum number of ARQ rounds. The throughput is evaluated
for some representative antenna configurations and load factors to show the
gains offered by the proposed techniques.Comment: Submitted to IEEE Transactions on Vehicular Technology (Apr 2009
Iterative decoding for MIMO channels via modified sphere decoding
In recent years, soft iterative decoding techniques have been shown to greatly improve the bit error rate performance of various communication systems. For multiantenna systems employing space-time codes, however, it is not clear what is the best way to obtain the soft information required of the iterative scheme with low complexity. In this paper, we propose a modification of the Fincke-Pohst (sphere decoding) algorithm to estimate the maximum a posteriori probability of the received symbol sequence. The new algorithm solves a nonlinear integer least squares problem and, over a wide range of rates and signal-to-noise ratios, has polynomial-time complexity. Performance of the algorithm, combined with convolutional, turbo, and low-density parity check codes, is demonstrated on several multiantenna channels. The results for systems that employ space-time modulation schemes seem to indicate that the best performing schemes are those that support the highest mutual information between the transmitted and received signals, rather than the best diversity gain
Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems
Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER
MIMO-aided near-capacity turbo transceivers: taxonomy and performance versus complexity
In this treatise, we firstly review the associated Multiple-Input Multiple-Output (MIMO) system theory and review the family of hard-decision and soft-decision based detection algorithms in the context of Spatial Division Multiplexing (SDM) systems. Our discussions culminate in the introduction of a range of powerful novel MIMO detectors, such as for example Markov Chain assisted Minimum Bit-Error Rate (MC-MBER) detectors, which are capable of reliably operating in the challenging high-importance rank-deficient scenarios, where there are more transmitters than receivers and hence the resultant channel-matrix becomes non-invertible. As a result, conventional detectors would exhibit a high residual error floor. We then invoke the Soft-Input Soft-Output (SISO) MIMO detectors for creating turbo-detected two- or three-stage concatenated SDM schemes and investigate their attainable performance in the light of their computational complexity. Finally, we introduce the powerful design tools of EXtrinsic Information Transfer (EXIT)-charts and characterize the achievable performance of the diverse near- capacity SISO detectors with the aid of EXIT charts
Space-time coding for UMTS. Performance evaluation in combination with convolutional and turbo coding
Space-time codes provide both diversity and coding gain when using multiple transmit antennas to increase spectral efficiency over wireless communications systems. Space-time block codes have already been included in the standardization process of UMTS in conjunction with conventional channel codes (convolutional and turbo codes). We discuss different encoding and decoding strategies when transmit diversity is combined with conventional channel codes, and present simulations results for the TDD and FDD modes of UTRA.Peer ReviewedPostprint (published version
Space-Time Trellis and Space-Time Block Coding Versus Adaptive Modulation and Coding Aided OFDM for Wideband Channels
Abstract—The achievable performance of channel coded spacetime trellis (STT) codes and space-time block (STB) codes transmitted over wideband channels is studied in the context of schemes having an effective throughput of 2 bits/symbol (BPS) and 3 BPS. At high implementational complexities, the best performance was typically provided by Alamouti’s unity-rate G2 code in both the 2-BPS and 3-BPS scenarios. However, if a low complexity implementation is sought, the 3-BPS 8PSK space-time trellis code outperfoms the G2 code. The G2 space-time block code is also combined with symbol-by-symbol adaptive orthogonal frequency division multiplex (AOFDM) modems and turbo convolutional channel codecs for enhancing the system’s performance. It was concluded that upon exploiting the diversity effect of the G2 space-time block code, the channel-induced fading effects are mitigated, and therefore, the benefits of adaptive modulation erode. In other words, once the time- and frequency-domain fades of the wideband channel have been counteracted by the diversity-aided G2 code, the benefits of adaptive modulation erode, and hence, it is sufficient to employ fixed-mode modems. Therefore, the low-complexity approach of mitigating the effects of fading can be viewed as employing a single-transmitter, single-receiver-based AOFDM modem. By contrast, it is sufficient to employ fixed-mode OFDM modems when the added complexity of a two-transmitter G2 scheme is affordable
- …