70,034 research outputs found
Effects of traffic characteristics on energy consumption of IoT End Devices in Smart City
The rapid urbanisation in many parts of the world in the last few decades has intensified the challenges of urban living. Internet of Things (IoT) can be leveraged as a tool for transformation to provide technology-assisted city development and management. However, given that many of the nodes in smart cities are constrained devices, part of the medium-long term challenges is how to sustain the real-time monitoring capabilities of the city without disrupting services. This paper investigates the effects of data traffic characteristics on the active life of constrained devices in smart cities. The access network model employs two leading low-power wide area network (LP-WAN) technologies; long range wide area network (LoRaWAN) and Sigfox specifications in a star topology. The results show that in Europe, for lightweight applications such as smart street lighting that sends small payloads once a day, Sigfox and LoRaWAN can provide device lives of about 5.82 years and 13.25 years respectively. On the other hand, for intense applications such as smart bus stops, using payload of 12 bytes, if the number of messages sent per day is increased from 1 to 140, Sigfox device life reduces from 4.43 years to 0.8 years while that of that of LoRaWAN reduces from 13.1 years to 10.48 years
Joint-rollout of FTTH and smart city fiber networks as a way to reduce rollout cost
Making cities smarter is the future. By bringing more technology into existing city infrastructure, smart city applications can arise. Whether these applications track devices e.g. public lightning, environmental measurements e.g. temperature or air quality, or analyze video streams e.g. for people density, it is expected that these will require a (near-) real time data connection. Upcoming 5G networks will be able to handle large amounts of connections at high speeds and low latencies and will therefor outperform current technologies such as 4G and low-power wide-area networks. In order to do so, these 5G networks fall back to numerous fiber connected small cells for up & downlink to the Internet. In this publication, we are looking into the additional fiber equipment and deployment cost to connect the required smart city network infrastructure, taking into account a Fiber-to-the-Home (FTTH) network is already available or will be installed as part of the smart city network rollout. More concretely, we are proposing a methodology comparing an anticipated and incremental planning approach for a number of different extensions upon the FTTH-network: connecting all electrical cabinets, connecting public lightning, and the connection of 5G using small cells. From this, we want to learn how much the total rollout cost can be reduced using a future-oriented smart city approach taking into account all future extensions, compared to an incremental short-time planning only planning additional fiber when required. In the meantime, we want to show the additional cost of creating a smart city network is limited when it is being combined with a FTTH rollout. Results of the proposed methodology and use case will be modeled planning and design software Comsof Fiber and will be published in a future work
Smart Metering in Infrastructure-Less Communication Environments and Applicability of LoRa Technology
Advanced-Metering-Infrastructure (AMI) is an integral part of Smart-Grids (SGs). It enables accurate consumer billing in presence of dynamic pricing, and improves efficiency and reliability of electricity distribution in presence of distributed generation. Value-added features of AMI such as diagnostics and maintenance service can identify the anomalous power consumption patterns of appliances at the end of their life cycle. Water and gas utility distribution networks in smart cities will incorporate AMI as an application of Internet-of-Things (IoT). The communication infrastructure plays a crucial role in enabling two-way communication between Smart-Meters (SMs) and the utility. AMI’s bi-directional communication facility supports precise modeling of load information and data management system facilitating demand-response applications to reduce energy wastage. Researchers have investigated the role of wireless technologies in Home-Area-Networks (HANs), Neighborhood-Area-Networks (NANs) and Wide-Area-Networks (WANs) in AMI. The arrival of new Low-Power-Wide-Area-Networks (LPWANs) technologies has opened up new technology integration possibilities in AMI. However, it is essential to understand the AMI architecture, envisioned application types, network requirements, features and limitations of existing technologies to determine a technology’s integration suitability in an application for smart metering technology. This chapter discusses LoRa for smart metering in infrastructure-less environments and the possible use of our multi-hop routing scheme
Long-Range Communications in Unlicensed Bands: the Rising Stars in the IoT and Smart City Scenarios
Connectivity is probably the most basic building block of the Internet of
Things (IoT) paradigm. Up to know, the two main approaches to provide data
access to the \emph{things} have been based either on multi-hop mesh networks
using short-range communication technologies in the unlicensed spectrum, or on
long-range, legacy cellular technologies, mainly 2G/GSM, operating in the
corresponding licensed frequency bands. Recently, these reference models have
been challenged by a new type of wireless connectivity, characterized by
low-rate, long-range transmission technologies in the unlicensed sub-GHz
frequency bands, used to realize access networks with star topology which are
referred to a \emph{Low-Power Wide Area Networks} (LPWANs). In this paper, we
introduce this new approach to provide connectivity in the IoT scenario,
discussing its advantages over the established paradigms in terms of
efficiency, effectiveness, and architectural design, in particular for the
typical Smart Cities applications
SymbioCity: Smart Cities for Smarter Networks
The "Smart City" (SC) concept revolves around the idea of embodying
cutting-edge ICT solutions in the very fabric of future cities, in order to
offer new and better services to citizens while lowering the city management
costs, both in monetary, social, and environmental terms. In this framework,
communication technologies are perceived as subservient to the SC services,
providing the means to collect and process the data needed to make the services
function. In this paper, we propose a new vision in which technology and SC
services are designed to take advantage of each other in a symbiotic manner.
According to this new paradigm, which we call "SymbioCity", SC services can
indeed be exploited to improve the performance of the same communication
systems that provide them with data. Suggestive examples of this symbiotic
ecosystem are discussed in the paper. The dissertation is then substantiated in
a proof-of-concept case study, where we show how the traffic monitoring service
provided by the London Smart City initiative can be used to predict the density
of users in a certain zone and optimize the cellular service in that area.Comment: 14 pages, submitted for publication to ETT Transactions on Emerging
Telecommunications Technologie
Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions
Traditional power grids are being transformed into Smart Grids (SGs) to
address the issues in existing power system due to uni-directional information
flow, energy wastage, growing energy demand, reliability and security. SGs
offer bi-directional energy flow between service providers and consumers,
involving power generation, transmission, distribution and utilization systems.
SGs employ various devices for the monitoring, analysis and control of the
grid, deployed at power plants, distribution centers and in consumers' premises
in a very large number. Hence, an SG requires connectivity, automation and the
tracking of such devices. This is achieved with the help of Internet of Things
(IoT). IoT helps SG systems to support various network functions throughout the
generation, transmission, distribution and consumption of energy by
incorporating IoT devices (such as sensors, actuators and smart meters), as
well as by providing the connectivity, automation and tracking for such
devices. In this paper, we provide a comprehensive survey on IoT-aided SG
systems, which includes the existing architectures, applications and prototypes
of IoT-aided SG systems. This survey also highlights the open issues,
challenges and future research directions for IoT-aided SG systems
- …