An investigation into the real-time manipulation and control of three-dimensional sound fields

This thesis describes a system that can be used for the decoding of a three dimensional audio recording over headphones or two, or more, speakers. A literature review of psychoacoustics and a review (both historical and current) of surround sound systems is carried out. The need for a system which is platform independent is discussed, and the proposal for a system based on an amalgamation of Ambisonics, binaural and transaural reproduction schemes is given. In order for this system to function optimally, each of the three systems rely on providing the listener with the relevant psychoacoustic cues. The conversion from a five speaker ITU array to binaural decode is well documented but pair-wise panning algorithms will not produce the correct lateralisation parameters at the ears of a centrally seated listener. Although Ambisonics has been well researched, no one has, as yet, produced a psychoacoustically optimised decoder for the standard irregular five speaker array as specified by the ITU as the original theory, as proposed by Gerzon and Barton (1992) was produced (known as a Vienna decoder), and example solutions given, before the standard had been decided on. In this work, the original work by Gerzon and Barton (1992) is analysed, and shown to be suboptimal, showing a high/low frequency decoder mismatch due to the method of solving the set of non-linear simultaneous equations. A method, based on the Tabu search algorithm, is applied to the Vienna decoder problem and is shown to provide superior results to those shown by Gerzon and Barton (1992) and is capable of producing multiple solutions to the Vienna decoder problem. During the write up of this report Craven (2003) has shown how 4th order circular harmonics (as used in Ambisonics) can be used to create a frequency independent panning law for the five speaker ITU array, and this report also shows how the Tabu search algorithm can be used to optimise these decoders further. A new method is then demonstrated using the Tabu search algorithm coupled with lateralisation parameters extracted from a binaural simulation of the Ambisonic system to be optimised (as these are the parameters that the Vienna system is approximating). This method can then be altered to take into account head rotations directly which have been shown as an important psychoacoustic parameter in the localisation of a sound source (Spikofski et al., 2001) and is also shown to be useful in differentiating between decoders optimised using the Tabu search form of the Vienna optimisations as no objective measure had been suggested. Optimisations for both Binaural and Transaural reproductions are then discussed so as to maximise the performance of generic HRTF data (i.e. not individualised) using inverse filtering methods, and a technique is shown that minimises the amount of frequency dependant regularisation needed when calculating cross-talk cancellation filters.EPRS

Surround by Sound: A Review of Spatial Audio Recording and Reproduction

In this article, a systematic overview of various recording and reproduction techniques for spatial audio is presented. While binaural recording and rendering is designed to resemble the human two-ear auditory system and reproduce sounds specifically for a listener’s two ears, soundfield recording and reproduction using a large number of microphones and loudspeakers replicate an acoustic scene within a region. These two fundamentally different types of techniques are discussed in the paper. A recent popular area, multi-zone reproduction, is also briefly reviewed in the paper. The paper is concluded with a discussion of the current state of the field and open problemsThe authors acknowledge National Natural Science Foundation of China (NSFC) No. 61671380 and Australian Research Council Discovery Scheme DE 150100363

Real-time Sound Source Separation For Music Applications

Sound source separation refers to the task of extracting individual sound sources from some number of mixtures of those sound sources. In this thesis, a novel sound source separation algorithm for musical applications is presented. It leverages the fact that the vast majority of commercially recorded music since the 1950s has been mixed down for two channel reproduction, more commonly known as stereo. The algorithm presented in Chapter 3 in this thesis requires no prior knowledge or learning and performs the task of separation based purely on azimuth discrimination within the stereo field. The algorithm exploits the use of the pan pot as a means to achieve image localisation within stereophonic recordings. As such, only an interaural intensity difference exists between left and right channels for a single source. We use gain scaling and phase cancellation techniques to expose frequency dependent nulls across the azimuth domain, from which source separation and resynthesis is carried out. The algorithm is demonstrated to be state of the art in the field of sound source separation but also to be a useful pre-process to other tasks such as music segmentation and surround sound upmixing

3-D audio using loudspeakers

Thesis (Ph. D.)--Massachusetts Institute of Technology, Program in Media Arts & Sciences, 1997.Includes bibliographical references (p. 145-153).by William G. Gardner.Ph.D

A Survey of Three-Dimensional Sound and its Applications

This research project seeks to develop a foundation of knowledge about three-dimensional sound (3-D sound) and its utilization across various media. Topics covered include the techniques by which 3-D sound is accomplished, its departures from the standard paradigm of stereophonic audio, the range of creative and engineering considerations within 3-D contexts and examinations of existing 3-D audio applications

Advanced automatic mixing tools for music

PhDThis thesis presents research on several independent systems that when combined together can generate an automatic sound mix out of an unknown set of multi‐channel inputs. The research explores the possibility of reproducing the mixing decisions of a skilled audio engineer with minimal or no human interaction. The research is restricted to non‐time varying mixes for large room acoustics. This research has applications in dynamic sound music concerts, remote mixing, recording and postproduction as well as live mixing for interactive scenes. Currently, automated mixers are capable of saving a set of static mix scenes that can be loaded for later use, but they lack the ability to adapt to a different room or to a different set of inputs. In other words, they lack the ability to automatically make mixing decisions. The automatic mixer research depicted here distinguishes between the engineering mixing and the subjective mixing contributions. This research aims to automate the technical tasks related to audio mixing while freeing the audio engineer to perform the fine‐tuning involved in generating an aesthetically‐pleasing sound mix. Although the system mainly deals with the technical constraints involved in generating an audio mix, the developed system takes advantage of common practices performed by sound engineers whenever possible. The system also makes use of inter‐dependent channel information for controlling signal processing tasks while aiming to maintain system stability at all times. A working implementation of the system is described and subjective evaluation between a human mix and the automatic mix is used to measure the success of the automatic mixing tools

Optimization and improvements in spatial sound reproduction systems through perceptual considerations

[ES] La reproducción de las propiedades espaciales del sonido es una cuestión cada vez más importante en muchas aplicaciones inmersivas emergentes. Ya sea en la reproducción de contenido audiovisual en entornos domésticos o en cines, en sistemas de videoconferencia inmersiva o en sistemas de realidad virtual o aumentada, el sonido espacial es crucial para una sensación de inmersión realista. La audición, más allá de la física del sonido, es un fenómeno perceptual influenciado por procesos cognitivos. El objetivo de esta tesis es contribuir con nuevos métodos y conocimiento a la optimización y simplificación de los sistemas de sonido espacial, desde un enfoque perceptual de la experiencia auditiva. Este trabajo trata en una primera parte algunos aspectos particulares relacionados con la reproducción espacial binaural del sonido, como son la escucha con auriculares y la personalización de la Función de Transferencia Relacionada con la Cabeza (Head Related Transfer Function - HRTF). Se ha realizado un estudio sobre la influencia de los auriculares en la percepción de la impresión espacial y la calidad, con especial atención a los efectos de la ecualización y la consiguiente distorsión no lineal. Con respecto a la individualización de la HRTF se presenta una implementación completa de un sistema de medida de HRTF y se introduce un nuevo método para la medida de HRTF en salas no anecoicas. Además, se han realizado dos experimentos diferentes y complementarios que han dado como resultado dos herramientas que pueden ser utilizadas en procesos de individualización de la HRTF, un modelo paramétrico del módulo de la HRTF y un ajuste por escalado de la Diferencia de Tiempo Interaural (Interaural Time Difference - ITD). En una segunda parte sobre reproducción con altavoces, se han evaluado distintas técnicas como la Síntesis de Campo de Ondas (Wave-Field Synthesis - WFS) o la panoramización por amplitud. Con experimentos perceptuales se han estudiado la capacidad de estos sistemas para producir sensación de distancia y la agudeza espacial con la que podemos percibir las fuentes sonoras si se dividen espectralmente y se reproducen en diferentes posiciones. Las aportaciones de esta investigación pretenden hacer más accesibles estas tecnologías al público en general, dada la demanda de experiencias y dispositivos audiovisuales que proporcionen mayor inmersión.[CA] La reproducció de les propietats espacials del so és una qüestió cada vegada més important en moltes aplicacions immersives emergents. Ja siga en la reproducció de contingut audiovisual en entorns domèstics o en cines, en sistemes de videoconferència immersius o en sistemes de realitat virtual o augmentada, el so espacial és crucial per a una sensació d'immersió realista. L'audició, més enllà de la física del so, és un fenomen perceptual influenciat per processos cognitius. L'objectiu d'aquesta tesi és contribuir a l'optimització i simplificació dels sistemes de so espacial amb nous mètodes i coneixement, des d'un criteri perceptual de l'experiència auditiva. Aquest treball tracta, en una primera part, alguns aspectes particulars relacionats amb la reproducció espacial binaural del so, com són l'audició amb auriculars i la personalització de la Funció de Transferència Relacionada amb el Cap (Head Related Transfer Function - HRTF). S'ha realitzat un estudi relacionat amb la influència dels auriculars en la percepció de la impressió espacial i la qualitat, dedicant especial atenció als efectes de l'equalització i la consegüent distorsió no lineal. Respecte a la individualització de la HRTF, es presenta una implementació completa d'un sistema de mesura de HRTF i s'inclou un nou mètode per a la mesura de HRTF en sales no anecoiques. A mès, s'han realitzat dos experiments diferents i complementaris que han donat com a resultat dues eines que poden ser utilitzades en processos d'individualització de la HRTF, un model paramètric del mòdul de la HRTF i un ajustament per escala de la Diferencià del Temps Interaural (Interaural Time Difference - ITD). En una segona part relacionada amb la reproducció amb altaveus, s'han avaluat distintes tècniques com la Síntesi de Camp d'Ones (Wave-Field Synthesis - WFS) o la panoramització per amplitud. Amb experiments perceptuals, s'ha estudiat la capacitat d'aquests sistemes per a produir una sensació de distància i l'agudesa espacial amb que podem percebre les fonts sonores, si es divideixen espectralment i es reprodueixen en diferents posicions. Les aportacions d'aquesta investigació volen fer més accessibles aquestes tecnologies al públic en general, degut a la demanda d'experiències i dispositius audiovisuals que proporcionen major immersió.[EN] The reproduction of the spatial properties of sound is an increasingly important concern in many emerging immersive applications. Whether it is the reproduction of audiovisual content in home environments or in cinemas, immersive video conferencing systems or virtual or augmented reality systems, spatial sound is crucial for a realistic sense of immersion. Hearing, beyond the physics of sound, is a perceptual phenomenon influenced by cognitive processes. The objective of this thesis is to contribute with new methods and knowledge to the optimization and simplification of spatial sound systems, from a perceptual approach to the hearing experience. This dissertation deals in a first part with some particular aspects related to the binaural spatial reproduction of sound, such as listening with headphones and the customization of the Head Related Transfer Function (HRTF). A study has been carried out on the influence of headphones on the perception of spatial impression and quality, with particular attention to the effects of equalization and subsequent non-linear distortion. With regard to the individualization of the HRTF a complete implementation of a HRTF measurement system is presented, and a new method for the measurement of HRTF in non-anechoic conditions is introduced. In addition, two different and complementary experiments have been carried out resulting in two tools that can be used in HRTF individualization processes, a parametric model of the HRTF magnitude and an Interaural Time Difference (ITD) scaling adjustment. In a second part concerning loudspeaker reproduction, different techniques such as Wave-Field Synthesis (WFS) or amplitude panning have been evaluated. With perceptual experiments it has been studied the capacity of these systems to produce a sensation of distance, and the spatial acuity with which we can perceive the sound sources if they are spectrally split and reproduced in different positions. The contributions of this research are intended to make these technologies more accessible to the general public, given the demand for audiovisual experiences and devices with increasing immersion.Gutiérrez Parera, P. (2020). Optimization and improvements in spatial sound reproduction systems through perceptual considerations [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/142696TESI

Quality-controlled audio-visual depth in stereoscopic 3D media

BACKGROUND: The literature proposes several algorithms that produce “quality-controlled” stereoscopic depth in 3D films by limiting the stereoscopic depth to a defined depth budget. Like stereoscopic displays, spatial sound systems provide the listener with enhanced (auditory) depth cues, and are now commercially available in multiple forms. AIM: We investigate the implications of introducing auditory depth cues to quality-controlled 3D media, by asking: “Is it important to quality-control audio-visual depth by considering audio-visual interactions, when integrating stereoscopic display and spatial sound systems?” MOTIVATION: There are several reports in literature of such “audio-visual interactions”, in which visual and auditory perception influence each other. We seek to answer our research question by investigating whether these audio-visual interactions could extend the depth budget used in quality-controlled 3D media. METHOD/CONCLUSIONS: The related literature is reviewed before presenting four novel experiments that build upon each other’s conclusions. In the first experiment, we show that content created with a stereoscopic depth budget creates measurable positive changes in audiences’ attitude towards 3D films. These changes are repeatable for different locations, displays and content. In the second experiment we calibrate an audio-visual display system and use it to measure the minimum audible depth difference. Our data is used to formulate recommendations for content designers and systems engineers. These recommendations include the design of an auditory depth perception screening test. We then show that an auditory-visual stimulus with a nearer auditory depth is perceived as nearer. We measure the impact of this effect upon a relative depth judgement, and investigate how the impact varies with audio-visual depth separation. Finally, the size of the cross-modal bias in depth is measured, from which we conclude that sound does have the potential to extend the depth budget by a small, but perceivable, amount