24,932 research outputs found
GEODA-SARAS: Multi-Phased array planar antenna for satellite communications
Nowadays, earth stations have as a common feature the use of large reflector antenna for downloading data from satellites. Large reflectors have impairments such as mechanical complexity, low flexibility and high cost. Thus, the feasibility of other antenna technologies must be evaluated, such as conformal adaptive antennas based on multiple planar active arrays. In the scenery under study, the capability to track several satellites simultaneously, higher flexibility, lower production and maintenance cost, modularity and a more efficient use of the spectrum; are the most important advantage to boost up active antenna arrays over large dishes
Calibration proposal for new antenna array architectures and technologies for space communications
In large antenna arrays with a large number of antenna elements, the required number of measurements for the characterization of the antenna array is very demanding in cost and time. This letter presents a new offline calibration process for active antenna arrays that reduces the number of measurements by subarray-level characterization. This letter embraces measurements, characterization, and calibration as a global procedure assessing about the most adequate calibration technique and computing of compensation matrices. The procedure has been fully validated with measurements of a 45-element triangular panel array designed for Low Earth Orbit (LEO) satellite tracking that compensates the degradation due to gain and phase imbalances and mutual coupling
Small Footprint Multilayered Millimeter-Wave Antennas and Feeding Networks for Multi-Dimensional Scanning and High-Density Integrated Systems
This paper overviews the state-of-the-art of substrate integrated waveguide (SIW) techniques in the design and realization of innovative low-cost, low-profile and low-loss (L3) millimeter-wave antenna elements, feeding networks and arrays for various wireless applications. Novel classes of multilayered antenna structures and systems are proposed and studied to exploit the vertical dimension of planar structures to overcome certain limita-tions in standard two-dimensional (2-D) topologies. The developed structures are based on two techniques, namely multi-layer stacked structures and E-plane corners. Differ-ent E-plane structures realised with SIW waveguide are presented, thereby demonstrating the potential of the proposed techniques as in multi-polarization antenna feeding. An array of 128 elements shows low SLL and height gain with just 200g of the total weight. Two versions of 2-D scanning multi-beam are presented, which effectively combine frequency scanning with beam forming networks. Adding the benefits of wide band performance to the multilayer structure, two bi-layer structures are investigated. Different stacked antennas and arrays are demonstrated to optimise the targeted antenna performances in the smallest footprint possible. These structures meet the requirement for developing inexpensive compact millimeter-wave antennas and antenna systems. Different structures and architectures are theoretically and experimentally studied and discussed for specific space- and ground-based appli-cations. Practical issues such as high-density integration and high-volume manufacturability are also addressed
Cost-effective aperture arrays for SKA Phase 1: single or dual-band?
An important design decision for the first phase of the Square Kilometre
Array is whether the low frequency component (SKA1-low) should be implemented
as a single or dual-band aperture array; that is, using one or two antenna
element designs to observe the 70-450 MHz frequency band. This memo uses an
elementary parametric analysis to make a quantitative, first-order cost
comparison of representative implementations of a single and dual-band system,
chosen for comparable performance characteristics. A direct comparison of the
SKA1-low station costs reveals that those costs are similar, although the
uncertainties are high. The cost impact on the broader telescope system varies:
the deployment and site preparation costs are higher for the dual-band array,
but the digital signal processing costs are higher for the single-band array.
This parametric analysis also shows that a first stage of analogue tile
beamforming, as opposed to only station-level, all-digital beamforming, has the
potential to significantly reduce the cost of the SKA1-low stations. However,
tile beamforming can limit flexibility and performance, principally in terms of
reducing accessible field of view. We examine the cost impacts in the context
of scientific performance, for which the spacing and intra-station layout of
the antenna elements are important derived parameters. We discuss the
implications of the many possible intra-station signal transport and processing
architectures and consider areas where future work could improve the accuracy
of SKA1-low costing.Comment: 64 pages, 23 figures, submitted to the SKA Memo serie
A Scalable 6-to-18 GHz Concurrent Dual-Band Quad-Beam Phased-Array Receiver in CMOS
This paper reports a 6-to-18 GHz integrated phased- array receiver implemented in 130-nm CMOS. The receiver is easily scalable to build a very large-scale phased-array system. It concurrently forms four independent beams at two different frequencies from 6 to 18 GHz. The nominal conversion gain of the receiver ranges from 16 to 24 dB over the entire band while the worst-case cross-band and cross-polarization rejections are achieved 48 dB and 63 dB, respectively. Phase shifting is performed in the LO path by a digital phase rotator with the worst-case RMS phase error and amplitude variation of 0.5° and 0.4 dB, respectively, over the entire band. A four-element phased-array receiver system is implemented based on four receiver chips. The measured array patterns agree well with the theoretical ones with a peak-to-null ratio of over 21.5 dB
Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review
Advances in reflectarrays and array lenses with electronic beam-forming
capabilities are enabling a host of new possibilities for these
high-performance, low-cost antenna architectures. This paper reviews enabling
technologies and topologies of reconfigurable reflectarray and array lens
designs, and surveys a range of experimental implementations and achievements
that have been made in this area in recent years. The paper describes the
fundamental design approaches employed in realizing reconfigurable designs, and
explores advanced capabilities of these nascent architectures, such as
multi-band operation, polarization manipulation, frequency agility, and
amplification. Finally, the paper concludes by discussing future challenges and
possibilities for these antennas.Comment: 16 pages, 12 figure
A Continuous Beam Steering Slotted Waveguide Antenna Using Rotating Dielectric Slabs
The design, simulation and measurement of a beam steerable slotted waveguide
antenna operating in X band are presented. The proposed beam steerable antenna
consists of a standard rectangular waveguide (RWG) section with longitudinal
slots in the broad wall. The beam steering in this configuration is achieved by
rotating two dielectric slabs inside the waveguide and consequently changing
the phase of the slots excitations. In order to confirm the usefulness of this
concept, a non-resonant 20-slot waveguide array antenna with an element spacing
of d = 0.58{\lambda}0 has been designed, built and measured. A 14 deg beam
scanning from near broadside ({\theta} = 4 deg) toward end-fire ({\theta} = 18
deg) direction is observed. The gain varies from 18.33 dB to 19.11 dB which
corresponds to the radiation efficiencies between 95% and 79%. The side-lobe
level is -14 dB at the design frequency of 9.35 GHz. The simulated co-polarized
realized gain closely matches the fabricated prototype patterns
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
- …