Low complexity hardware interleaver for MIMO-OFDM based wireless LAN

Abstract-A low complexity hardware interleaver architecture is presented for MIMO-OFDM based Wireless LAN e.g. 802.11n. Novelty of the presented architecture is twofold; 1) Flexibility to choose interleaver implementation with different modulation scheme and different size for different spatial streams in a multi antenna system, 2) Complexity to compute on the fly interleaver address is reduce by using recursion and is supported by mathematical formulation. The proposed interleaver architecture is implemented on 65nm CMOS process and it consumes 0.035 mm 2 area. The proposed architecture supports high speed communication with maximum throughput of 900 Mbps at a clock rate of 225 MHz

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system

Low complexity physical layer security approach for 5G internet of things

Fifth-generation (5G) massive machine-type communication (mMTC) is expected to support the cellular adaptation of internet of things (IoT) applications for massive connectivity. Due to the massive access nature, IoT is prone to high interception probability and the use of conventional cryptographic techniques in these scenarios is not practical considering the limited computational capabilities of the IoT devices and their power budget. This calls for a lightweight physical layer security scheme which will provide security without much computational overhead and/or strengthen the existing security measures. Here a shift based physical layer security approach is proposed which will provide a low complexity security without much changes in baseline orthogonal frequency division multiple access (OFDMA) architecture as per the low power requirements of IoT by systematically rearranging the subcarriers. While the scheme is compatible with most fast Fourier transform (FFT) based waveform contenders which are being proposed in 5G especially in mMTC and ultra-reliable low latency communication (URLLC), it can also add an additional layer of security at physical layer to enhanced mobile broadband (eMBB)

5GNOW: Challenging the LTE Design Paradigms of Orthogonality and Synchronicity

LTE and LTE-Advanced have been optimized to deliver high bandwidth pipes to wireless users. The transport mechanisms have been tailored to maximize single cell performance by enforcing strict synchronism and orthogonality within a single cell and within a single contiguous frequency band. Various emerging trends reveal major shortcomings of those design criteria: 1) The fraction of machine-type-communications (MTC) is growing fast. Transmissions of this kind are suffering from the bulky procedures necessary to ensure strict synchronism. 2) Collaborative schemes have been introduced to boost capacity and coverage (CoMP), and wireless networks are becoming more and more heterogeneous following the non-uniform distribution of users. Tremendous efforts must be spent to collect the gains and to manage such systems under the premise of strict synchronism and orthogonality. 3) The advent of the Digital Agenda and the introduction of carrier aggregation are forcing the transmission systems to deal with fragmented spectrum. 5GNOW is an European research project supported by the European Commission within FP7 ICT Call 8. It will question the design targets of LTE and LTE-Advanced having these shortcomings in mind and the obedience to strict synchronism and orthogonality will be challenged. It will develop new PHY and MAC layer concepts being better suited to meet the upcoming needs with respect to service variety and heterogeneous transmission setups. Wireless transmission networks following the outcomes of 5GNOW will be better suited to meet the manifoldness of services, device classes and transmission setups present in envisioned future scenarios like smart cities. The integration of systems relying heavily on MTC into the communication network will be eased. The per-user experience will be more uniform and satisfying. To ensure this 5GNOW will contribute to upcoming 5G standardization.Comment: Submitted to Workshop on Mobile and Wireless Communication Systems for 2020 and beyond (at IEEE VTC 2013, Spring

Channel estimation and tracking algorithms for vehicle to vehicle communications

The vehicle-to-vehicle (V2V) communications channels are highly time-varying, making reliable communication difficult. This problem is particularly challenging because the standard of the V2V communications (IEEE 802.11p standard) is based on the WLAN IEEE 802.11a standard, which was designed for indoor, relatively stationary channels; so the IEEE 802.11p standard is not customized for outdo or, highly mobile non-stationary channels. In this thesis,We propose Channel estimation and tracking algorithms that are suitable for highly-time varying channels. The proposed algorithms utilize the finite alphabet property of the transmitted symbol, time domain truncation, decision-directed as well as pilot information. The proposed algorithm s improve the overall system performance in terms of bit error rates, enabling the system to achieve higher data rates and larger packet lengths at high relative velocities. Simulation results show that the proposed algorithms achieve improved performance for all the V2V channel models with different velocities, and for different modulation schemes and packet sizes as compared to the conventional least squares and other previously proposed channel estimation techniques for V2V channels

A Novel Seed Based Random Interleaving for OFDM System and Its PHY Layer Security Implications

Wireless channels are characterized by multipath and fading that can often cause long burst of errors. Even though, to date, many very sophisticated error correcting codes have been designed, yet none can handle long burst of errors efficiently. An interleaver, a device that distributes a burst of errors, possibly caused by a deep fade, and makes them appear as simple random errors, therefore, proves to a very useful technique when used in conjunction with an efficient error correcting code. In this work, a novel near optimal seed based random interleaver is designed. An optimal interleaver scatters a given burst of errors uniformly over a fixed block of data - a property that is measured by so called ‘spread’. The design makes use of a unique seed based pseudo-random sequence generator or logistic map based chaotic sequence generator to scramble the given block of data. Since the proposed design is based on a seed based scrambler, the nature of input is irrelevant. Therefore, the proposed interleaver can interleave either the bits or the symbols or the packets or even the frames. Accordingly, in this work, we analyze the suitability of interleaver when introduced before or after the modulation in single carrier communication systems and show that interleaving the bits before modulation or interleaving the symbols after modulation has same advantage. We further show that, in an orthogonal frequency division multiplexing (OFDM) systems, the position of interleaver, whether before or after constellation mapper, has no significance, and is interchangeable. However, scrambling symbols is computationally less expensive than scrambling bits. For the purpose of analyzing the performance of the proposed seed based random interleaver, simulations are carried out in MATLAB®. Results show that our proposed seed based random interleaver has near optimal properties of ‘spread’ and ‘dispersion’. Furthermore, the proposed interleaver is evaluated in terms of bit error rate (BER) versus length of burst error in a single carrier system both before and after modulation. The proposed interleaver out-performs the built in RANDINTLV in MATLAB® when used in the same system. It shows that proposed interleaver can convert greater amount of burst errors into simple random errors than that of MATLAB® interleaver. The proposed interleaver is also tested in IEEE 802.16e based WiMAX system with Stanford University Interim (SUI) channels to compare the performance of average BER versus SNR for both pre modulation and post modulation interleaver. Results show that pre modulation interleaver and post modulation has same performance. There is also a side advantage of this seed based interleaver, in that it generates a variety of unique random-looking interleaving sequences. Only a receiver that has the knowledge of the input seed can generate this sequence and no one else. If the interleaving patterns are kept secure then it can possibly be used to introduce an extra layer of security at physical (PHY) layer. In that way, at PHY layer, one builds an additional entry barrier to break through and it comes with no extra cost. This property has been investigated by carrying out key sensitivity analysis to show that the attacks to guess key can be very futile, as difference at 4th decimal place in the initial condition can lead to entirely different scrambling

Turbo codes and turbo algorithms

In the first part of this paper, several basic ideas that prompted the coming of turbo codes are commented on. We then present some personal points of view on the main advances obtained in past years on turbo coding and decoding such as the circular trellis termination of recursive systematic convolutional codes and double-binary turbo codes associated with Max-Log-MAP decoding. A novel evaluation method, called genieinitialised iterative processing (GIIP), is introduced to assess the error performance of iterative processing. We show that using GIIP produces a result that can be viewed as a lower bound of the maximum likelihood iterative decoding and detection performance. Finally, two wireless communication systems are presented to illustrate recent applications of the turbo principle, the first one being multiple-input/multiple-output channel iterative detection and the second one multi-carrier modulation with linear precoding