Loss Tomography in General Topologies with Network Coding

Network tomography infers internal network characteristics by sending and collecting probe packets from the network edge. Traditional tomographic techniques for general topologies typically use a mesh of multicast trees and/or unicast paths to cover the entire graph, which is suboptimal from the point of view of bandwidth efficiency and estimation accuracy. In this paper, we investigate an active probing method for link loss inference in a general topology, where multiple sources and receivers are used and intermediate nodes are equipped with network coding, in addition to unicast and multicast, capabilities. With our approach, each link is traversed by exactly one packet, which is in general a linear combination of the original probes. The receivers infer the loss rate on all links by observing not only the number but also the contents of the received probes. In this paper: (i) we propose an orientation algorithm that creates an acyclic graph with the maximum number of identifiable edges (ii) we define probe combining coding schemes and discuss some of their properties and (iii) we present simulation results over realistic topologies using Belief-Propagation (BP) algorithms

Active Topology Inference using Network Coding

Our goal is to infer the topology of a network when (i) we can send probes between sources and receivers at the edge of the network and (ii) intermediate nodes can perform simple network coding operations, i.e., additions. Our key intuition is that network coding introduces topology-dependent correlation in the observations at the receivers, which can be exploited to infer the topology. For undirected tree topologies, we design hierarchical clustering algorithms, building on our prior work. For directed acyclic graphs (DAGs), first we decompose the topology into a number of two-source, two-receiver (2-by-2) subnetwork components and then we merge these components to reconstruct the topology. Our approach for DAGs builds on prior work on tomography, and improves upon it by employing network coding to accurately distinguish among all different 2-by-2 components. We evaluate our algorithms through simulation of a number of realistic topologies and compare them to active tomographic techniques without network coding. We also make connections between our approach and alternatives, including passive inference, traceroute, and packet marking

A Network Coding Approach to Loss Tomography

Network tomography aims at inferring internal network characteristics based on measurements at the edge of the network. In loss tomography, in particular, the characteristic of interest is the loss rate of individual links and multicast and/or unicast end-to-end probes are typically used. Independently, recent advances in network coding have shown that there are advantages from allowing intermediate nodes to process and combine, in addition to just forward, packets. In this paper, we study the problem of loss tomography in networks with network coding capabilities. We design a framework for estimating link loss rates, which leverages network coding capabilities, and we show that it improves several aspects of tomography including the identifiability of links, the trade-off between estimation accuracy and bandwidth efficiency, and the complexity of probe path selection. We discuss the cases of inferring link loss rates in a tree topology and in a general topology. In the latter case, the benefits of our approach are even more pronounced compared to standard techniques, but we also face novel challenges, such as dealing with cycles and multiple paths between sources and receivers. Overall, this work makes the connection between active network tomography and network coding

Active Learning of Multiple Source Multiple Destination Topologies

We consider the problem of inferring the topology of a network with $M$ sources and $N$ receivers (hereafter referred to as an $M$-by-$N$ network), by sending probes between the sources and receivers. Prior work has shown that this problem can be decomposed into two parts: first, infer smaller subnetwork components (i.e., $1$-by-$N$'s or $2$-by-$2$'s) and then merge these components to identify the $M$-by-$N$ topology. In this paper, we focus on the second part, which had previously received less attention in the literature. In particular, we assume that a $1$-by-$N$ topology is given and that all $2$-by-$2$ components can be queried and learned using end-to-end probes. The problem is which $2$-by-$2$'s to query and how to merge them with the given $1$-by-$N$, so as to exactly identify the $2$-by-$N$ topology, and optimize a number of performance metrics, including the number of queries (which directly translates into measurement bandwidth), time complexity, and memory usage. We provide a lower bound, $\lceil \frac{N}{2} \rceil$, on the number of $2$-by-$2$'s required by any active learning algorithm and propose two greedy algorithms. The first algorithm follows the framework of multiple hypothesis testing, in particular Generalized Binary Search (GBS), since our problem is one of active learning, from $2$-by-$2$ queries. The second algorithm is called the Receiver Elimination Algorithm (REA) and follows a bottom-up approach: at every step, it selects two receivers, queries the corresponding $2$-by-$2$, and merges it with the given $1$-by-$N$; it requires exactly $N-1$ steps, which is much less than all $\binom{N}{2}$ possible $2$-by-$2$'s. Simulation results over synthetic and realistic topologies demonstrate that both algorithms correctly identify the $2$-by-$N$ topology and are near-optimal, but REA is more efficient in practice

Network monitoring in multicast networks using network coding

In this paper we show how information contained in robust network codes can be used for passive inference of possible locations of link failures or losses in a network. For distributed randomized network coding, we bound the probability of being able to distinguish among a given set of failure events, and give some experimental results for one and two link failures in randomly generated networks. We also bound the required field size and complexity for designing a robust network code that distinguishes among a given set of failure events

ROUTING TOPOLOGY RECOVERY FOR WIRELESS SENSOR NETWORKS

Liu, Rui Ph.D., Purdue University, December 2014. Routing Topology Recovery for Wireless Sensor Networks. Major Professor: Yao Liang

Passive network tomography for erroneous networks: A network coding approach

Passive network tomography uses end-to-end observations of network communication to characterize the network, for instance to estimate the network topology and to localize random or adversarial glitches. Under the setting of linear network coding this work provides a comprehensive study of passive network tomography in the presence of network (random or adversarial) glitches. To be concrete, this work is developed along two directions: 1. Tomographic upper and lower bounds (i.e., the most adverse conditions in each problem setting under which network tomography is possible, and corresponding schemes (computationally efficient, if possible) that achieve this performance) are presented for random linear network coding (RLNC). We consider RLNC designed with common randomness, i.e., the receiver knows the random code-books all nodes. (To justify this, we show an upper bound for the problem of topology estimation in networks using RLNC without common randomness.) In this setting we present the first set of algorithms that characterize the network topology exactly. Our algorithm for topology estimation with random network errors has time complexity that is polynomial in network parameters. For the problem of network error localization given the topology information, we present the first computationally tractable algorithm to localize random errors, and prove it is computationally intractable to localize adversarial errors. 2. New network coding schemes are designed that improve the tomographic performance of RLNC while maintaining the desirable low-complexity, throughput-optimal, distributed linear network coding properties of RLNC. In particular, we design network codes based on Reed-Solomon codes so that a maximal number of adversarial errors can be localized in a computationally efficient manner even without the information of network topology.Comment: 40 pages, under submission for IEEE Trans. on Information Theor