A state-of-the-art review on torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains

© 2019, Levrotto and Bella. All rights reserved. Electric vehicles are the future of private passenger transportation. However, there are still several technological barriers that hinder the large scale adoption of electric vehicles. In particular, their limited autonomy motivates studies on methods for improving the energy efficiency of electric vehicles so as to make them more attractive to the market. This paper provides a concise review on the current state-of-the-art of torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains (FEVIADs). Starting from the operating principles, which include the "control allocation" problem, the peculiarities of each proposed solution are illustrated. All the existing techniques are categorized based on a selection of parameters deemed relevant to provide a comprehensive overview and understanding of the topic. Finally, future concerns and research perspectives for FEVIAD are discussed

State Estimation and Control of Active Systems for High Performance Vehicles

In recent days, mechatronic systems are getting integrated in vehicles ever more. While stability and safety systems such as ABS, ESP have pioneered the introduction of such systems in the modern day car, the lowered cost and increased computational power of electronics along with electrification of the various components has fuelled an increase in this trend. The availability of chassis control systems onboard vehicles has been widely studied and exploited for augmenting vehicle stability. At the same time, for the context of high performance and luxury vehicles, chassis control systems offer a vast and untapped potential to improve vehicle handling and the driveability experience. As performance objectives have not been studied very well in the literature, this thesis deals with the problem of control system design for various active chassis control systems with performance as the main objective. A precursor to the control system design is having complete knowledge of the vehicle states, including those such as the vehicle sideslip angle and the vehicle mass, that cannot be measured directly. The first half of the thesis is dedicated to the development of algorithms for the estimation of these variables in a robust manner. While several estimation methods do exist in the literature, there is still some scope of research in terms of the development of estimation algorithms that have been validated on a test track with extensive experimental testing without using research grade sensors. The advantage of the presented algorithms is that they work only with CAN-BUS data coming from the standard vehicle ESP sensor cluster. The algorithms are tested rigorously under all possible conditions to guarantee robustness. The second half of the thesis deals with the design of the control objectives and controllers for the control of an active rear wheel steering system for a high performance supercar and a torque vectoring algorithm for an electric racing vehicle. With the use of an active rear wheel steering, the driver’s confidence in the vehicle improves due a reduction in the lag between the lateral acceleration and the yaw rate, which allows drivers to push the vehicle harder on a racetrack without losing confidence in it. The torque vectoring algorithm controls the motor torques to improve the tire utilisation and increases the net lateral force, which allows professional drivers to set faster lap times

How TRAF-NETSIM Works.

This paper describes how TRAF-NETSIM works in detail. It is a review of the TRAF-NETSIM micro-simulation model, for use in the research topic "The Development of Queueing Simulation Procedures for Traffic in Bangkok". TRAF-NETSIM is a computer program for modelling of traffic in urban networks. It is written in the FORTRAN 77 computer language. It uses bit-manipulation mechanisms for "packing" and "unpacking" data and a program overlay structure to reduce the computer memory requirements of the program. The model is based on a fixed time, and discrete event simulation approach. The periodic scan method is used in the model with a time interval of one second. In the model, up to 16 different vehicle types with 4 different vehicle categories (car, carpool, bus and truck) can be identified. Also, the driver's behaviour (passive, normal, aggressive), pedestrians' movement, parking and blocking (eg a broken-down car) can be simulated. Moreover, it has the capability to simulate the effects of traffic control ranging from a simple stop sign controlled junction to a dynamic/real time control system. The effects of spillbacks can be simulated in detail. The estimation of fuel consumption and vehicle emissions are optional simulations. Car following and lane changing models are incorporated into TRAF-NETSIM. The outputs can be shown in US standard units, Metric units, or both

Vehicle Parameters Estimation and Driver Behavior Classification for Adaptive Shift Strategy of Heavy Duty Vehicles

Commercial vehicles fulfill the majority of inland freight transportation in the United States, and they are very large consumers of fuels. The increasingly stringent regulation on greenhouse-gas emission has driven manufacturers to adopt new fuel efficient technologies. Among others, advanced transmission control strategy can provide tangible improvement with low incremental cost. An adaptive shift strategy is proposed in this work to optimize the shift maps on-the-fly based on the road load and driver behavior while reducing the initial calibration efforts. In addition, the adaptive shift strategy provides the fleet owner a mean to select a tradeoff between fuel economy and drivability, since the drivers are often not the owner of the vehicle. In an attempt to develop the adaptive shift strategy, the vehicle parameters and driver behavior need to be evaluated first. Therefore, three research questions are addressed in this dissertation: (i) vehicle parameters estimation; (ii) driver behavior classification; (iii) online shift strategy adaption. In vehicle parameters estimation, a model-based vehicle rolling resistance and aerodynamic drag coefficient online estimator is proposed. A new Weighted Recursive Least Square algorithm was developed. It uses a supervisor to extracts data during the constant-speed event and saves the average road load at each speed segment. The algorithm was tested in the simulation with real-world driving data. The results have shown a more robust performance compared with the original Recursive Least Square algorithm, and high accuracy of aerodynamic drag estimation. To classify the driver behavior, a driver score algorithm was proposed. A new method is developed to represent the time-series driving data into events represented by symbolic data. The algorithm is tested with real-world driving data and shows a high classification accuracy across different vehicles and driving cycles. Finally, a new adaptive shift scheme was developed, which synthesizes the information about vehicle parameters and driver score developed in the previous steps. The driver score is used as a proxy to match the driving characteristics in real time. Drivability objective is included in the optimization through a torque reserve and it is subsequently evaluated via a newly developed metric. The impact of the shift maps on the objective drivability and fuel economy metrics is evaluated quantitatively in the vehicle simulation. The algorithms proposed in this dissertation are developed with practical implementation in mind. The methods can reduce the initial calibration effort and provide the fleet owner a mean to select an appropriate tradeoff between fuel economy and drivability depending on the vocation

Advanced Control and Estimation Concepts, and New Hardware Topologies for Future Mobility

According to the National Research Council, the use of embedded systems throughout society could well overtake previous milestones in the information revolution. Mechatronics is the synergistic combination of electronic, mechanical engineering, controls, software and systems engineering in the design of processes and products. Mechatronic systems put “intelligence” into physical systems. Embedded sensors/actuators/processors are integral parts of mechatronic systems. The implementation of mechatronic systems is consistently on the rise. However, manufacturers are working hard to reduce the implementation cost of these systems while trying avoid compromising product quality. One way of addressing these conflicting objectives is through new automatic control methods, virtual sensing/estimation, and new innovative hardware topologies

Design and validation of decision and control systems in automated driving

xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo