140 research outputs found

    Influence of Structural Defects on the Properties of Metamagnetic Shape Memory Alloys

    Get PDF
    The production of μ-particles of Metamagnetic Shape Memory Alloys by crushing and subsequent ball milling process has been analyzed. The high energy involved in the milling process induces large internal stresses and high density of defects with a strong influence on the martensitic transformation; the interphase creation and its movement during the martensitic transformation produces frictional contributions to the entropy change (exothermic process) both during forward and reverse transformation. The frictional contribution increases with the milling time as a consequence of the interaction between defects and interphases. The influence of the frictional terms on the magnetocaloric effect has been evidenced. Besides, the presence of antiphase boundaries linked to superdislocations helps to understand the spin-glass behavior at low temperatures in martensite. Finally, the particles in the deformed state were introduced in a photosensitive polymer. The mechanical damping associated to the Martensitic Transformation (MT) of the particles is clearly distinguished in the produced composite, which could be interesting for the development of magnetically-tunable mechanical dampers.This research was funded by Projects RTI2018-094683-B-C5 (4,5) (MCIU/AEI/FEDER,UE); ASACTEI Pcia.Santa Fe IO-2017-00138, PID-UNR ING 575 and ING 612 (2018–202

    Combined effect of magnetic field and hydrostatic pressure on the phase transitions exhibited by Ni-Mn-In metamagnetic shape memory alloy

    Get PDF
    We present a systematic study of the magnetostructural and magnetic transitions in the prototype metamagnetic shape memory alloy Ni50Mn34.5In15.5 under hydrostatic pressure and combined pressure and magnetic field. Pressure extends the area of stability of the antiferromagnetic martensitic phase. At low magnetic field the pressure derivatives of the Curie temperatures of austenite, TCA, and martensite, TCM, show opposite signs. This fact is described in the framework of the Landau thermodynamic model as arising from a weak long-range antiferromagnetic state of martensite. Two volume magnetoelastic constants were estimated using the experimental values of the pressure derivatives of TCA and TCM. A correlation between the signs of the pressure shifts of TCA, and TCM and the distance between Mn-Mn nearest neighbours is established, which matches the empirical Castelliz-Kanomata diagram. The entropy change at martensitic transformation (MT), ?SMT, grows up when the MT temperature, TM, is approaching TCA under the influence of pressure, but under constant non-zero pressure this dependence is inverse.The financial supports from Ministry of Science, Innovations and Universities (projects MAT2017-83631-C3-3-R and RTI2018-094683-B-C53-54) and from the Basque Government Department of Education (project IT1245-19) are greatly acknowledged

    Effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy

    Get PDF
    [EN] The effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy in austenitic phase at room temperature has been analyzed by neutron and high-resolution X-ray diffraction. The ball milling promotes a mechanically-induced martensitic transformation as well as the appearance of amorphous-like non-transforming regions, following a double stage; for short milling times (below 30 min), a strong size reduction and martensite induction occur. On the opposite, for longer times, the increase of strains predominates and consequently a larger amount of non-transforming regions appears. The effect of the microstructural defects brought by milling (as dislocations) on both the enthalpy change at the martensitic transformation and the high field magnetization of the austenite has been quantitatively estimated and correlated to the internal strains. Contrary to what occurs in ternary Ni-Mn-Sn alloys, the mechanically induced defects do not change the ferromagnetic coupling between Mn atoms, but just cause a net reduction on the magnetic moments.This work has been carried out with the financial support of the Spanish “Ministerio de Economía y Competitividad” (Projects number MAT2015-65165-C2-R) “Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017-018 AMELEC) and Basque Government Grant No. IT-1005-16. We acknowledge ILL and ALBA for the beam time allocations: (http://doi.org/10.5291/ILL-DATA. INTER-411), CRG-2352, and ALBA BL04_MPSD beamline at ALBA Synchrotron with the collaboration of ALBA staff. PLR has received funding from “la Caixa” and "Caja Navarra" Foundations, under agreement LCF/PR/PR13/51080004

    Mechanically induced disorder and crystallization process in Ni-Mn-In ball-milled alloys

    Get PDF
    [EN] High mechanical deformation has been induced in a Ni-Mn-In metamagnetic shape memory alloy by means of ball milling. The evolution of both the martensitic transformation and the magnetic properties associated to the microstructural variations has been characterized. The as-milled nanometric particles display an amorphous structure with a frustrated magnetic state compatible with a canonical spin-glass. On heating, an abrupt crystallization process occurs around 500 K leading to a cubic B2 structure, which, in turn, does not show martensitic transformation. Modified Arrott plots point to competing long- and short-range magnetic couplings in the B2 structure. On further heating, a relaxation process takes place above 700 K concurrently with a B2-L21 atomic ordering, giving rise to an anomalous two-step thermal expansion. The combined effect of both processes makes possible the subsequent occurrence of a martensitic transformation, which takes place at the same temperature than in the bulk. The large relative-cooling-power linked to the magnetocaloric effect at the martensitic transformation in the annealed powder makes it interesting for practical applications of magnetic refrigeration at nanoscale.This work has been carried out with the financial support of the Spanish “Ministerio de Economía y Competitividad” (Projects number MAT2012-37923-C02 and MAT2015-65165-C2-R). We also acknowledge ILL and SpINS for beam time allocation (experiment CRG-2158). RCF acknowledges a Postdoctoral fellowship from the Univeridad Pública de Navarra (grant number: 1081/2015). JARV acknowledges CSIC for a JAEdoc contract. J. Pons is acknowledged for TEM observations

    Magnetic Field-Induced Strain of Metamagnetic Heusler Alloy Ni41Co9Mn31.5Ga18.5

    Get PDF
    Ni41Co9Mn31.5Ga18.5 is a re-entrant and metamagnetic Heusler alloy. In order to investigate the magnetic functionality of polycrystalline Ni41Co9Mn31.5Ga18.5, magnetic field-induced strain (MFIS) measurements were performed. A 0.12% MFIS was observed at 340 K and 10 T. Strict MFISs between 330 and 370 K were observed. These magneto-structural variances acted in concert with the metamagnetic property observed by the magnetization measurements and magneto-caloric property observed by the caloric measurements in applied magnetic fields. The MFISs were proportional to the fourth power of the magnetization, and this result is in agreement with Takahashi’s spin fluctuation theory of itinerant electron magnetism. The investigation of time response of the MFIS was performed by means of water-cooled electric magnet, zero magnetic field to 1.66 T in 8.0 s at 354 K. A 2.2×10−4 MFIS was observed, which was 80% of the MFIS in a 60-s mode. This indicates that a high-speed transition has occurred on applying magnetic fields

    Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons

    Get PDF
    Research in functional magnetic materials often employs thin films as model systems for finding new chemical compositions with promising properties. However, the scale-up of thin films towards bulk-like structures is challenging, since the material synthesis conditions are entirely different for thin films and e.g. rapid quenching methods. As one of the consequences, the type and degree of order in thin films and melt-spun ribbons are usually different, leading to different magnetic properties. In this work, using the example of magnetocaloric Ni-Co-Mn-Al melt-spun ribbons and thin films, we show that the excellent functional properties of the films can be reproduced also in ribbons, if an appropriate heat treatment is applied, that installs the right degree of order in the ribbons. We show that some chemical disorder is needed to get a pronounced and sharp martensitic transition. Increasing the order with annealing improves the magnetic properties only up to a point where selected types of disorder survive, which in turn compromise the magnetic properties. These findings allow us to understand the impact of the type and degree of disorder on the functional properties, paving the way for a faster transfer of combinatorial thin film research towards bulk-like materials for magnetic Heusler alloys
    corecore