Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices

The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding

Doctor of Philosophy

dissertationIn wireless sensor networks, knowing the location of the wireless sensors is critical in many remote sensing and location-based applications, from asset tracking, and structural monitoring to geographical routing. For a majority of these applications, received signal strength (RSS)-based localization algorithms are a cost effective and viable solution. However, RSS measurements vary unpredictably because of fading, the shadowing caused by presence of walls and obstacles in the path, and non-isotropic antenna gain patterns, which affect the performance of the RSS-based localization algorithms. This dissertation aims to provide efficient models for the measured RSS and use the lessons learned from these models to develop and evaluate efficient localization algorithms. The first contribution of this dissertation is to model the correlation in shadowing across link pairs. We propose a non-site specific statistical joint path loss model between a set of static nodes. Radio links that are geographically proximate often experience similar environmental shadowing effects and thus have correlated shadowing. Using a large number of multi-hop network measurements in an ensemble of indoor and outdoor environments, we show statistically significant correlations among shadowing experienced on different links in the network. Finally, we analyze multihop paths in three and four node networks using both correlated and independent shadowing models and show that independent shadowing models can underestimate the probability of route failure by a factor of two or greater. Second, we study a special class of algorithms, called kernel-based localization algorithms, that use kernel methods as a tool for learning correlation between the RSS measurements. Kernel methods simplify RSS-based localization algorithms by providing a means to learn the complicated relationship between RSS measurements and position. We present a common mathematical framework for kernel-based localization algorithms to study and compare the performance of four different kernel-based localization algorithms from the literature. We show via simulations and an extensive measurement data set that kernel-based localization algorithms can perform better than model-based algorithms. Results show that kernel methods can achieve an RMSE up to 55% lower than a model-based algorithm. Finally, we propose a novel distance estimator for estimating the distance between two nodes a and b using indirect link measurements, which are the measurements made between a and k, for k ? b and b and k, for k ? a. Traditionally, distance estimators use only direct link measurement, which is the pairwise measurement between the nodes a and b. The results show that the estimator that uses indirect link measurements enables better distance estimation than the estimator that uses direct link measurements

A Hybrid Stochastic Approach for Self-Location of Wireless Sensors in Indoor Environments

Indoor location systems, especially those using wireless sensor networks, are used in many application areas. While the need for these systems is widely proven, there is a clear lack of accuracy. Many of the implemented applications have high errors in their location estimation because of the issues arising in the indoor environment. Two different approaches had been proposed using WLAN location systems: on the one hand, the so-called deductive methods take into account the physical properties of signal propagation. These systems require a propagation model, an environment map, and the position of the radio-stations. On the other hand, the so-called inductive methods require a previous training phase where the system learns the received signal strength (RSS) in each location. This phase can be very time consuming. This paper proposes a new stochastic approach which is based on a combination of deductive and inductive methods whereby wireless sensors could determine their positions using WLAN technology inside a floor of a building. Our goal is to reduce the training phase in an indoor environment, but, without an loss of precision. Finally, we compare the measurements taken using our proposed method in a real environment with the measurements taken by other developed systems. Comparisons between the proposed system and other hybrid methods are also provided