A novel load-balancing scheme for cellular-WLAN heterogeneous systems with cell-breathing technique

This paper proposes a novel load-balancing scheme for an operator-deployed cellular-wireless local area network (WLAN) heterogeneous network (HetNet), where the user association is controlled by employing a cell-breathing technique for the WLAN network. This scheme eliminates the complex coordination and additional signaling overheads between the users and the network by allowing the users to simply associate with the available WLAN networks similar to the traditional WLAN-first association, without making complex association decisions. Thus, this scheme can be easily implemented in an existing operator-deployed cellular-WLAN HetNet. The performance of the proposed scheme is evaluated in terms of load distribution between cellular and WLAN networks, user fairness, and system throughput, which demonstrates the superiority of the proposed scheme in load distribution and user fairness, while optimizing the system throughput. In addition, a cellular-WLAN interworking architecture and signaling procedures are proposed for implementing the proposed load-balancing schemes in an operator-deployed cellular-WLAN HetNet

Congestion control Fast Recovery and Load Balancing in LAN

To control the congestion in local area network (LAN) Spanning tree protocol (STP) is used. Spanning Tree Protocol (STP) is IEEE approved standard 802.1 d. STP block the redundant ports in switched layer-2 networks. STP takes 30 to 60 seconds for recovering a link. Rapid spanning tree protocol (RSTP) is used to make the fast recovery for uplinks and downlinks. RSTP makes a fast recovery in switched network and takes seem less time to recover a link. Virtual local area networks (VLANs) and Multi instance spanning tree protocol (MSTP) is used to make load balancing and control the flood of BPDU’s in local area switched network. Virtual-Local Area Network (VLAN’s) and Multi Instance Spanning-Tree Protocol (MSTP) are associated with each other and Provide load balancing in switched network. Keywords: Spanning Tree Protocol (STP), Rapid Spanning Tree protocol (RSTP), Multi Instance Spanning Tree Protocol (MSTP), Virtual Local Area Network (VLAN), Bridge protocol data unit (BPDU), Switched Network

Adaptive stochastic radio access selection scheme for cellular-WLAN heterogeneous communication systems

This study proposes a novel adaptive stochastic radio access selection scheme for mobile users in heterogeneous cellular-wireless local area network (WLAN) systems. In this scheme, a mobile user located in dual coverage area randomly selects WLAN with probability of ω when there is a need for downloading a chunk of data. The value of ω is optimised according to the status of both networks in terms of network load and signal quality of both cellular and WLAN networks. An analytical model based on continuous time Markov chain is proposed to optimise the value of ω and compute the performance of proposed scheme in terms of energy efficiency, throughput, and call blocking probability. Both analytical and simulation results demonstrate the superiority of the proposed scheme compared with the mainstream network selection schemes: namely, WLAN-first and load balancing

Load-Balancing in Local and Metro-Area networks with MPTCP and OpenFlow

In this thesis, a novel load-balancing technique for local or metro-area traffic is proposed in mesh-style topologies. The technique uses Software Defined Networking (SDN) architecture with virtual local area network (VLAN) setups typically seen in a campus or small-to-medium enterprise environment. This was done to provide a possible solution or at least a platform to expand on for the load-balancing dilemma that network administrators face today. The transport layer protocol Multi-Path TCP (MPTCP) coupled with IP aliasing is also used. The trait of MPTCP of forming multiple subflows from sender to receiver depending on the availability of IP addresses at either the sender or receiver helps to divert traffic in the subflows across all available paths. The combination of MPTCP subflows with IP aliasing enables spreading out of the traffic load across greater number of links in the network, and thereby achieving load balancing and better network utilization. The traffic formed of each subflow would be forwarded across the network based on Hamiltonian \u27paths\u27 which are created in association with each switch in the topology which are directly connected to hosts. The amount of \u27paths\u27 in the topology would also depend on the number of VLANs setup for the hosts in the topology. This segregation would allow for network administrators to monitor network utilization across VLANs and give the ability to balance load across VLANs. We have devised several experiments in Mininet, and the experimentation showed promising results with significantly better throughput and network utilization compared to cases where normal TCP was used to send traffic from source to destination. Our study clearly shows the advantages of using MPTCP for load balancing purposes in SDN type architectures and provides a platform for future research on using VLANs, SDN, and MPTCP for network traffic management

Intelligent hybrid cheapest cost and mobility optimization RAT selection approaches for heterogeneous wireless networks

The evolution of wireless networks has led to the deployment of different Radio Access Technologies (RATs) such as UMTS Terrestrial Radio Access Network (UTRAN), Long Term Evolution (LTE), Wireless Local Area Network (WLAN) and Mobile Worldwide Interoperability for Microwave Access (WiMAX) which are integrated through a common platform. Common Radio Resource Management (CRRM) was proposed to manage radio resource utilization in heterogeneous wireless networks and to provide the required Quality of Service (QoS) for allocated calls. RAT selection algorithms are an integral part of the CRRM algorithms. Their role is to decide, when a new or Vertical Handover (VHO) call is requested, which of the available RATs is most suitable to fit the need of the incoming call and when to admit them. This paper extends our earlier work on the proposed intelligent mobility optimization and proposes an intelligent hybrid cheapest cost RAT selection approach which aims to increase users' satisfaction by allocation users that are looking for cheapest cost connections to a RAT that offers the cheapest cost of service. A comparison for the performance of centralized load-balancing, proposed and distributed cheapest cost and mobility optimization algorithms is presented. Simulation results show that the proposed intelligent algorithms perform better than the centralized load-balancing and the distributed algorithms. © 2014 Academy Publisher

Load Balancing Hotspots in Sensor Storage Systems

Sensor networks provide us with the means of effectively monitoring and interacting with the physical world. A sensor network usually consists of a large number of small inexpensive battery-operated sensors deployed in a geographic area. This dissertation considers a sensor network deployed to monitor a disaster area. First responders continuously issue ad-hoc queries while moving in the disaster area. In such an environment, it is often more beneficial to store sensor readings and process ad-hoc queries within rather than outside the sensor network.Recently, this led to an increased popularity of Data-Centric Storage (DCS).A DCS scheme is based on a mapping function from readings to sensors based on the attribute values of each reading. This mapping function defines the DCS index structure.Two significant problems arising in this DCS network model due to data and traffic skewness are storage hotspots and query hotspots. Storage hotspots are formed when many sensor readings are mapped for storage to a relatively small number of sensor nodes. Query hotspots occur when many user queries target few sensor nodes. Both types of hotspots are hard to predict. Storage hotspots result in an uncontrolled reading shedding that decreases the Quality of Data (QoD). Due to the limited wireless bandwidth of sensors, hotspots decrease QoD by increasing collisions (thus losses) of reading/query packets. When lasting long enough, hotspots affect the Quality of Service (QoS) by unevenly depleting energy in the sensor network.This dissertation addresses both problems of hotspots through load balancing. The main dissertation hypothesis is that data migration resulting from local or global load balancing of the DCS index structure can effectively solve the hotspot problems. The contributions of this dissertation lie in developing two schemes, namely, the Zone Sharing/Zone Partitioning/Zone Partial Replication (ZS/ZP/ZPR) scheme and the K-D tree based Data-Centric Storage (KDDCS) scheme. ZS/ZP/ZPR detects and decomposes both types of hotspots through load balancing in the hotspot area. KDDCS avoids the formation of hotspots through globally load-balancing the underlying DCS index structure. Experimental evaluation shows the effectiveness of the proposed schemes in coping with hotspots in comparison to the state-of-the-art DCS schemes

LAACAD: Load bAlancing k-area coverage through autonomous deployment in wireless sensor networks

Session 6B: Coverage & LocalizationAlthough the problem of k-area coverage has been intensively investigated for dense wireless sensor networks (WSNs), how to arrive at a k-coverage sensor deployment that optimizes certain objectives in relatively sparse WSNs still faces both theoretical and practical difficulties. In this paper, we present a practical algorithm LAACAD (Load bAlancing k-Area Coverage through Autonomous Deployment) to move sensor nodes toward k-area coverage, aiming at minimizing the maximum sensing range required by the nodes. LAACAD enables purely autonomous node deployment as it only entails localized computations. We prove the convergence of the algorithm, as well as the (local) optimality of the output. We also show that our optimization objective is closely related to other frequently considered objectives. Therefore, our practical algorithm design also contributes to the theoretical understanding of the k-area coverage problem. Finally, we use extensive simulation results both to confirm our theoretical claims and to demonstrate the efficacy of LAACAD. © 2012 IEEE.postprin

Self-optimizing load balancing with backhaul-constrained radio access networks

Self-Organizing Network (SON) technology aims at autonomously deploying, optimizing and repairing the Radio Access Networks (RAN). SON algorithms typically use Key Performance Indicators (KPIs) from the RAN. It is shown that in certain cases, it is essential to take into account the impact of the backhaul state in the design of the SON algorithm. We revisit the Base Station (BS) load definition taking into account the backhaul state. We provide an analytical formula for the load along with a simple estimator for both elastic and guaranteed bit-rate (GBR) traffic. We incorporate the proposed load estimator in a self-optimized load balancing algorithm. Simulation results for a backhaul constrained heterogeneous network illustrate how the correct load definition can guarantee a proper operation of the SON algorithm.Comment: Wireless Communications Letters, IEEE, 201

GCP: Gossip-based Code Propagation for Large-scale Mobile Wireless Sensor Networks

Wireless sensor networks (WSN) have recently received an increasing interest. They are now expected to be deployed for long periods of time, thus requiring software updates. Updating the software code automatically on a huge number of sensors is a tremendous task, as ''by hand'' updates can obviously not be considered, especially when all participating sensors are embedded on mobile entities. In this paper, we investigate an approach to automatically update software in mobile sensor-based application when no localization mechanism is available. We leverage the peer-to-peer cooperation paradigm to achieve a good trade-off between reliability and scalability of code propagation. More specifically, we present the design and evaluation of GCP ({\emph Gossip-based Code Propagation}), a distributed software update algorithm for mobile wireless sensor networks. GCP relies on two different mechanisms (piggy-backing and forwarding control) to improve significantly the load balance without sacrificing on the propagation speed. We compare GCP against traditional dissemination approaches. Simulation results based on both synthetic and realistic workloads show that GCP achieves a good convergence speed while balancing the load evenly between sensors