1,786 research outputs found
TCP in 5G mmWave Networks: Link Level Retransmissions and MP-TCP
MmWave communications, one of the cornerstones of future 5G mobile networks,
are characterized at the same time by a potential multi-gigabit capacity and by
a very dynamic channel, sensitive to blockage, wide fluctuations in the
received signal quality, and possibly also sudden link disruption. While the
performance of physical and MAC layer schemes that address these issues has
been thoroughly investigated in the literature, the complex interactions
between mmWave links and transport layer protocols such as TCP are still
relatively unexplored. This paper uses the ns-3 mmWave module, with its channel
model based on real measurements in New York City, to analyze the performance
of the Linux TCP/IP stack (i) with and without link-layer retransmissions,
showing that they are fundamental to reach a high TCP throughput on mmWave
links and (ii) with Multipath TCP (MP-TCP) over multiple LTE and mmWave links,
illustrating which are the throughput-optimal combinations of secondary paths
and congestion control algorithms in different conditions.Comment: 6 pages, 11 figures, accepted for presentation at the 2017 IEEE
Conference on Computer Communications Workshops (INFOCOM WKSHPS
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Will TCP work in mmWave 5G Cellular Networks?
The vast available spectrum in the millimeter wave (mmWave) bands offers the
possibility of multi-Gbps data rates for fifth generation (5G) cellular
networks. However, mmWave capacity can be highly intermittent due to the
vulnerability of mmWave signals to blockages and delays in directional
searching. Such highly variable links present unique challenges for adaptive
control mechanisms in transport layer protocols and end-to-end applications.
This paper considers the fundamental question of whether TCP - the most widely
used transport protocol - will work in mmWave cellular systems. The paper
provides a comprehensive simulation study of TCP considering various factors
such as the congestion control algorithm, including the recently proposed TCP
BBR, edge vs. remote servers, handover and multi- connectivity, TCP packet size
and 3GPP-stack parameters. We show that the performance of TCP on mmWave links
is highly dependent on different combinations of these parameters, and identify
the open challenges in this area.Comment: 7 pages, 4 figures, 2 tables. To be published in the IEEE
Communication Magazin
Fixed-Mobile Convergence in the 5G era: From Hybrid Access to Converged Core
The availability of different paths to communicate to a user or device
introduces several benefits, from boosting enduser performance to improving
network utilization. Hybrid access is a first step in enabling convergence of
mobile and fixed networks, however, despite traffic optimization, this approach
is limited as fixed and mobile are still two separate core networks
inter-connected through an aggregation point. On the road to 5G networks, the
design trend is moving towards an aggregated network, where different access
technologies share a common anchor point in the core. This enables further
network optimization in addition to hybrid access, examples are userspecific
policies for aggregation and improved traffic balancing across different
accesses according to user, network, and service context. This paper aims to
discuss the ongoing work around hybrid access and network convergence by
Broadband Forum and 3GPP. We present some testbed results on hybrid access and
analyze some primary performance indicators such as achievable data rates, link
utilization for aggregated traffic and session setup latency. We finally
discuss the future directions for network convergence to enable future
scenarios with enhanced configuration capabilities for fixed and mobile
convergence.Comment: to appear in IEEE Networ
Reliable Video Streaming over mmWave with Multi Connectivity and Network Coding
The next generation of multimedia applications will require the
telecommunication networks to support a higher bitrate than today, in order to
deliver virtual reality and ultra-high quality video content to the users. Most
of the video content will be accessed from mobile devices, prompting the
provision of very high data rates by next generation (5G) cellular networks. A
possible enabler in this regard is communication at mmWave frequencies, given
the vast amount of available spectrum that can be allocated to mobile users;
however, the harsh propagation environment at such high frequencies makes it
hard to provide a reliable service. This paper presents a reliable video
streaming architecture for mmWave networks, based on multi connectivity and
network coding, and evaluates its performance using a novel combination of the
ns-3 mmWave module, real video traces and the network coding library Kodo. The
results show that it is indeed possible to reliably stream video over cellular
mmWave links, while the combination of multi connectivity and network coding
can support high video quality with low latency.Comment: To be presented at the 2018 IEEE International Conference on
Computing, Networking and Communications (ICNC), March 2018, Maui, Hawaii,
USA (invited paper). 6 pages, 4 figure
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration
Communications at frequencies above 10 GHz (the mmWave band) are expected to
play a major role for the next generation of cellular networks (5G), because of
the potential multi-gigabit, ultra-low latency performance of this technology.
mmWave frequencies however suffer from very high isotropic pathloss, which may
result in cells with a much smaller coverage area than current LTE macrocells.
High directionality techniques will be used to improve signal quality and
extend coverage area, along with a high density deployment of mmWave base
stations (BS). However, when propagation conditions are hard and it is
difficult to provide high quality coverage with mmWave BS, it is necessary to
rely on previous generation LTE base stations, which make use of lower
frequencies (900 MHz - 3.5 GHz), which are less sensitive to blockage and
experience lower pathloss. In order to provide ultra-reliable services to
mobile users there is a need for network architectures that tightly and
seamlessly integrate the LTE and mmWave Radio Access Technologies. In this
paper we will present two possible alternatives for this integration and show
how simulation tools can be used to assess and compare their performance.Comment: This paper was accepted for presentation at the ninth EAI SIMUtools
2016 conference, August 22 - 23, 2016, Prague, Czech Republi
- …