Dynamic Resource Allocation for Multiple-Antenna Wireless Power Transfer

We consider a point-to-point multiple-input-single-output (MISO) system where a receiver harvests energy from a wireless power transmitter to power itself for various applications. The transmitter performs energy beamforming by using an instantaneous channel state information (CSI). The CSI is estimated at the receiver by training via a preamble, and fed back to the transmitter. The channel estimate is more accurate when longer preamble is used, but less time is left for wireless power transfer before the channel changes. To maximize the harvested energy, in this paper, we address the key challenge of balancing the time resource used for channel estimation and wireless power transfer (WPT), and also investigate the allocation of energy resource used for wireless power transfer. First, we consider the general scenario where the preamble length is allowed to vary dynamically. Taking into account the effects of imperfect CSI, the optimal preamble length is obtained online by solving a dynamic programming (DP) problem. The solution is shown to be a threshold-type policy that depends only on the channel estimate power. Next, we consider the scenario in which the preamble length is fixed. The optimal preamble length is optimized offline. Furthermore, we derive the optimal power allocation schemes for both scenarios. For the scenario of dynamic-length preamble, the power is allocated according to both the optimal preamble length and the channel estimate power; while for the scenario of fixed-length preamble, the power is allocated according to only the channel estimate power. The analysis results are validated by numerical simulations. Encouragingly, with optimal power allocation, the harvested energy by using optimized fixed-length preamble is almost the same as the harvested energy by employing dynamic-length preamble, hence allowing a low-complexity WPT system to be implemented in practice.Comment: 30 pages, 6 figures, Submitted to the IEEE Transactions on Signal Processin

Final report on the evaluation of RRM/CRRM algorithms

Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin

Deep Reinforcement Learning for Real-Time Optimization in NB-IoT Networks

NarrowBand-Internet of Things (NB-IoT) is an emerging cellular-based technology that offers a range of flexible configurations for massive IoT radio access from groups of devices with heterogeneous requirements. A configuration specifies the amount of radio resource allocated to each group of devices for random access and for data transmission. Assuming no knowledge of the traffic statistics, there exists an important challenge in "how to determine the configuration that maximizes the long-term average number of served IoT devices at each Transmission Time Interval (TTI) in an online fashion". Given the complexity of searching for optimal configuration, we first develop real-time configuration selection based on the tabular Q-learning (tabular-Q), the Linear Approximation based Q-learning (LA-Q), and the Deep Neural Network based Q-learning (DQN) in the single-parameter single-group scenario. Our results show that the proposed reinforcement learning based approaches considerably outperform the conventional heuristic approaches based on load estimation (LE-URC) in terms of the number of served IoT devices. This result also indicates that LA-Q and DQN can be good alternatives for tabular-Q to achieve almost the same performance with much less training time. We further advance LA-Q and DQN via Actions Aggregation (AA-LA-Q and AA-DQN) and via Cooperative Multi-Agent learning (CMA-DQN) for the multi-parameter multi-group scenario, thereby solve the problem that Q-learning agents do not converge in high-dimensional configurations. In this scenario, the superiority of the proposed Q-learning approaches over the conventional LE-URC approach significantly improves with the increase of configuration dimensions, and the CMA-DQN approach outperforms the other approaches in both throughput and training efficiency

Dynamic Channel Access Scheme for Interference Mitigation in Relay-assisted Intra-WBANs

This work addresses problems related to interference mitigation in a single wireless body area network (WBAN). In this paper, We propose a distributed \textit{C}ombined carrier sense multiple access with collision avoidance (CSMA/CA) with \textit{F}lexible time division multiple access (\textit{T}DMA) scheme for \textit{I}nterference \textit{M}itigation in relay-assisted intra-WBAN, namely, CFTIM. In CFTIM scheme, non interfering sources (transmitters) use CSMA/CA to communicate with relays. Whilst, high interfering sources and best relays use flexible TDMA to communicate with coordinator (C) through using stable channels. Simulation results of the proposed scheme are compared to other schemes and consequently CFTIM scheme outperforms in all cases. These results prove that the proposed scheme mitigates interference, extends WBAN energy lifetime and improves the throughput. To further reduce the interference level, we analytically show that the outage probability can be effectively reduced to the minimal.Comment: 2015 IEEE International Conference on Protocol Engineering (ICPE) and International Conference on New Technologies of Distributed Systems (NTDS), Paris, France. arXiv admin note: text overlap with arXiv:1602.0865

Survey of Spectrum Sharing for Inter-Technology Coexistence

Increasing capacity demands in emerging wireless technologies are expected to be met by network densification and spectrum bands open to multiple technologies. These will, in turn, increase the level of interference and also result in more complex inter-technology interactions, which will need to be managed through spectrum sharing mechanisms. Consequently, novel spectrum sharing mechanisms should be designed to allow spectrum access for multiple technologies, while efficiently utilizing the spectrum resources overall. Importantly, it is not trivial to design such efficient mechanisms, not only due to technical aspects, but also due to regulatory and business model constraints. In this survey we address spectrum sharing mechanisms for wireless inter-technology coexistence by means of a technology circle that incorporates in a unified, system-level view the technical and non-technical aspects. We thus systematically explore the spectrum sharing design space consisting of parameters at different layers. Using this framework, we present a literature review on inter-technology coexistence with a focus on wireless technologies with equal spectrum access rights, i.e. (i) primary/primary, (ii) secondary/secondary, and (iii) technologies operating in a spectrum commons. Moreover, we reflect on our literature review to identify possible spectrum sharing design solutions and performance evaluation approaches useful for future coexistence cases. Finally, we discuss spectrum sharing design challenges and suggest future research directions

A Case for Time Slotted Channel Hopping for ICN in the IoT

Recent proposals to simplify the operation of the IoT include the use of Information Centric Networking (ICN) paradigms. While this is promising, several challenges remain. In this paper, our core contributions (a) leverage ICN communication patterns to dynamically optimize the use of TSCH (Time Slotted Channel Hopping), a wireless link layer technology increasingly popular in the IoT, and (b) make IoT-style routing adaptive to names, resources, and traffic patterns throughout the network--both without cross-layering. Through a series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware, we find that our approach is fully robust against wireless interference, and almost halves the energy consumed for transmission when compared to CSMA. Most importantly, our adaptive scheduling prevents the time-slotted MAC layer from sacrificing throughput and delay